I know to hook a joystick to the board I need an adapter that fits on the back of the PC Gigabyte says you ahve to order it. Are they standard or does each motherboard manufacturer have their own? I was looking on ebay and didn't see any, but I don't know what to search for exactly.

If the CPU craps out what will happen besides the obvious. Will the mobo be able to boot enough to show the IDE's/equipment and let you get into bios? Rudy

Hi, Anyone else had crazy temp readings with EasyTune5? The old version 4 works ok, but I wanted to try the new one. I use a 7VT600-RZ mobo, maybe it's not compatible with new EasyTune? Does anyone know? Example problem is system temp reading 90c (instead of 33)!

i have an 8knxp ultra64. it has two seperate sata controllers. one is a siil 4 channel controller, the other is the adaptec embedded hostraid sata controller. for one, i couldn't find the appropriate driver on the factory driver cd provided by the manufacture. i had to d/l the driver...

I'm rebuilding my GA-7VAX based system because, as a development PC, I've installed so much crap over the year that it's taking forever to start-up. Anyway, basic installation of Windows XP Pro with SP2 carried out with all USB 2 devices unplugged. I've taken an image of this basic set-up. I've...

Ok after 6 years I bit the bullet and went to Athlon. I used to despise these things and now I have changed. I just build a new pc specs. Motherboard - Gigabyte GA-K8NF-9 64Bit 3500 3 x 200 Gig SATA Drives 3.5 gig ram Now installing XP off a cd when the pc starts up it never says "Press

....hard drive that a Gigabyte 7VT600-1394 mobo with BIOS version F7 will handle without using any drive overlays or RAID?

In message 1111239174.47ce61afaea273dc706ecc7637993a71@teranews, mikep187 writes I want to replace the chipset fan on my GA-K8NS Ultra-939 for something quieter. I know there's not much clearance between the heatsing and AGP card. Has anyone found a replacement...

I'm interested in getting a 939 socket m/b and an Athlon64 3000+. I've always been an Asus m/b person, but thought I would at least test the waters on views of the Asus vs. other m/b's. Any views on 'best' of these three manufactures for socket 939? Thanks. ColBlip. E-mail:...

Is it possible to enable usb 2.0 on the onboard usb ports ? Or if someone knows how to connect the extra usb 2.0 ports plz answer I'm trying to hook up a USB 2.0 compatible device (an mp3 player/hard disk) to my computer. I've downloaded and installed the latest drivers from gigabyte's site The...

Follow up on the machine I just put togeather. AMD 3200+ 400fsb GA-7N400 Pro2 (rev.2) Kingston ram PC3200/400 Thermaltake butterfly 480W PSU Thermaltake silent boost CPU fan & HS 2 fans in front, 1 in back, 1 in side panel 2 in PSU. This CPU on the GA-7VT600 1394 was reporting 40C in the bios. On...

Hello SCSI friends, I am having some strange/worrying problems with my SCSI RAID setup. Perhaps someone can help? I have got a Gigabyte GA-KNXP Ultra m/b with embedded Adaptec AIC-7902 U320 SCSI controller. I have got a RAID 10 array made up of 4 x Maxtor Atlas IV 10k. 36GB disks (SCSI IDs 3,...

Is this still required? I'm using an 850 chipset GA-8IHXP. Windows XP Raid 0. Someone was telling me this is not longer required. Builder

My old Asus mb had a useful application that ran under Windows and allowed you to monitor temperature and other parameters. All that comes with my Gigabyte board is the awful Easitune that appears to have been written by a 14 year old looking at the design. Is there an alternative that is easier...

I have just assembled a new computer with a Gigabyte GA-7VM400 AMF motherboard, Maxtor SATA hard drive connected to SATA0 and a Sony DVD writer connected as master on the IDE primary channel. After switch-on it went through the usual procedure to the 'insert system disk' prompt. I inserted Windows...

Right so ive got my scsi set up and windows installed but when I enable sata and or gigaraid my machine wont boot , ive tried setting the boot order to scsi first but that didn't work what am I doing wrong this time?

Is there another website from which I can get newer drivers for the GigaRaid controller on the 7n400 Pro ? Thanks, - NuTs

Can someone give me a link to download the Win XP SATA drivers for the GA-8KNXP. XP asks for the drivers on floppy when doing it's install. They are not on the supplied CD. Thank you.

Just built a new P4 3ghz LG with a GA-8IPE775Pro MB. Firstly I installed my fairly new Radeon 128mb 9600SE and had some app problems which turned out to be some wierd compatibility issue with the card. So I now have an older Nvidia GeForce4 Ti 4800 SE with the latest Nvidia drivers(66.93). Every so...

I'm having problems with data corruption after installing TaxCut 2004 on the following system. I have had some infrequent and isolated incidents since January. 1. Media Player would generate errors instead of launching 2. Adobe Audition, when opening and playing a project file I created,...