I'll start out w/ my particular #'s & ANY help WHATSOEVER would be more than greatly appreciated. OS = 98 SE Mobo = Gigabyte K7 Triton 400 Series (KT 400 - AGP8X/FSB333) BIOS = Award Modular BIOS v6.00PG BIOS ROM in socket = YES - Size = 256k BIOS ID = 10/11/2002-KT400-8235-6A6LYG0CC-00 Chipset...

Motherboard is GA-81DX, Intel 845 AGP set. Manual warns that AGP 4X graphics cards 1.5 volts are OK. Will the later spec AGP 8X graphics cards 0.8 volts be safe. Pent 4, 512 MB SDRAM, Any recommendations? Please.

MB K7 TRITON Via KT600 is compatible with Asus 9180 SE Agp 1/2/4/8 X ? Thanks

I'm considering installing a USB drive via a Vipower mobile rack, which uses a series B USB connector on the back. I'd like to connect this to one of the F_USB (front USB) connectors on the GA-8KNXP, but can't locate a cable. I assume this can be done, and it makes more sense than running a USB...

Motherboard is GA-81DX, Intel 845 AGP set. Manual warns that AGP 4X graphics cards 1.5 volts are OK. aGP 2X 3.3 volts will burn the motherboard. Will the later spec AGP 8X graphics cards 0.8 volts be safe. Pent 4, 512 MB SDRAM, Any recommendations? Please.

Any ideas? Goes to white screen with mouse pointer and stops.

Mogo is GA-81DX, Intel 845 AGP set. Manual warns that AGP 4X graphics cards 1.5 volts are OK. AGP 2X 3.3 volts will burn the mogo. Will the later spec AGP 8X graphics cards 0.8 volts be safe. Pent 4, 512 MB SDRAM, Any recommendations? Please.

Hi Anyone know where to d/l the above? Can't find it anywhere on the gigabyte site (they only list ver 2.0 which has some components that the 1.1 doesn't have so I'm not sure if I can use it?). Thanks Jimi

Hi, I have established a boot drive using IDE1. Everything works well and I'd now like to put it on ite raid with another drive. I'm using XP. The question is, at what point do I install the ite raid driver? I'd like to do this with no loss of data. :) Thanks

Anyone using the GA-8I875 MB? Are there any memory problems as there are with the GA-8KNXP MB's I need to know because I want to change mine under an RMA and don't want another 8KNXP given the memory problems many people have. Mine is amongst them and if very unstable even with the memory at...

Anyone using the GA-8I875 MB? Are there any memory problems as there are with the GA-8KNXP MB's I need to know because I want to change mine under an RMA and don't want another 8KNXP given the memory problems many people have. Mine is amongst them and if very unstable even with the memory at...

Any one using this combo with a P4 2.8C overclocked to ? Or just running with default timings ? Alan

Will the 7VAXP-Ultra recognize a 160gb HDD? Or will I need to load the EZbios from the WD Datalife Guard Tools Disk. I am using the F4 Bios..the drive will be attached to the Promise Controller. Thank for your help. Tom

"Hannes Porkka" wrote in message = ... Microsoft Customer How can anyone get something out of spreading these emails. What does it do for them, unless they are mentally incapacitated.????????

Hello, I just received new F8c bios from Gigabyte Support (it adds support for new Duron FSB266 CPU). If anybody are intersted in this bios I can share it. On my GA-7DX Rev. 4.2 it works fine. -- Tomasz Bogacz QUANTUM TTC Ltd Poland

I am desperately trying to come to grips with RAID setup after a hard drive failure destroyed a mass of Data - not all of it retrievable from backups. As a result I have 2 Samsung Spinpoint 80gb IDE drives which I want to mirror, and will be running Win XP professional. So far I am getting...

I saw all three boards in one shop they looked basically identical to me. Can anyone list what is the difference between this three and how would one rate all three of them according to performance since the price of all three a similar. Thanks

"Pun Krocker" wrote in message ... Can anyone tell me the max cpu I can install in the GA-7-ZXE mobo? http://www.giga-byte.com/Motherboard/Support/CPUSupportList/CPUSupportList_List.htm

Motherboard is GA-81DX, Intel 845 AGP set. Manual warns that AGP 4X graphics cards 1.5 volts are necessary. Will the later spec AGP 8X graphics cards 0.8 volts be safe. Please.

I have a Gigabyte GA-8P667 Ultra motherboard with a 1.7ghz processor. When i set the "High Performance" setting in the bios to "Enabled" It won't boot into windows XP. I just get a black screen forever until i disable this option. I'm having some problems with my computer and after a...