BRAND NEW SERVER FOR SALE NEVER USED IN BOX 1 Compaq ML570 server dual xeon 700 processors ( can handle 4)

BRAND NEW SERVER FOR SALE NEVER USED IN BOX 1 Compaq ML570 server dual xeon 700 processors ( can handle 4)

How can I install a Compaq smart array controller 3200 on a non-Compaq machine? I recently acquired (was exchanged for an old computer) a Compaq smart array controller and some drives. All the installation instructions for it refer to using the Compaq smartstart utility. However this won't work on...

Hi All, we have a Proliant 3000/333 and want to upgrade the CPU but can't find any switch settings for 412MHz. Any ideas? Many thanks, Libra Team

I just bought a used Compaq Proliant 5500 server. I installed Linux on it and all is working OK. I then wanted to have a look 'inside'. So I removed the side cover and began to poke around a bit. I removed the CPU's and the CPU Power Modules. I put them back in, just wanted to check them out. I...

Dave, Thanks, that's helpful. Unfortunately this is my only multi-processor box. Setting the "affinity" seemed to help when I deselected 2 of the cpu's, but when all were selected all the processing quickly went to either the first or third cpu. However this was short lived as it gave me an ASR...

Hello, I've a Proliant ML370 with W2k Advanced Server and I've configured the Compaq management agents event notifier to send SMTP mail. I've selected all notification events. I receive mail from NIC Agents (ver. 6.40) when , for example, I turn off a NIC from the Network team, so I think the...

if i am not mistaken, these machines do not support IDE drives (only the CDROM). You can pull the cable from the array controller, and clear the NVRAM via the SW1 switch on the board. put the CDROM back on, and boot from the CD. Then run the system congfig utililty to re-populate the NVRam, and...

Hiya all We are trying to install a 10K series Compaq/Hp cabinet to support an EVA5000 the cab has 2 PDU's is it ok to feed the 2 PDU's from separate phases or will this be a health & safety issue ie the potential difference across the 2 phases could reach 480 volts. any URL's to the info would...

Details he http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3054269468 I don't over charge on shipping, I charge only what it costs me to ship it. Local pickup is available. I do provide the most complete system available, with the most memory, dual proc, and dual nic; ready to go! I've got...

Can a PIII-500 and a PIII-550 be installed on the same AP-400 motherboard? A processor will run at less than it's rated speed, will it not? Thanks all. -- ROT13 my email address to reply:

Asking $7500 in ft lauderdale

Want to buy the follwing processors Xeon 700 Mhz 1 Mb cache 5/12 V sl4xv / sl49q ( 174448-b21 ) any brand Xeon 700 Mhz 2 Mb cache 5/12 V sl49s / sl4xx ( 174449-b21 ) any brand Xeon 900 Mhz 2 Mb cache 5/12 V sl4xz ( 222627-b21 ) any brand Xeon Dp 2.0 Ghz 400 FBS sl6em ( or any other step ) Xeon Dp...

Want to buy the follwing processors Xeon 700 Mhz 1 Mb cache 5/12 V sl4xv / sl49q ( 174448-b21 ) any brand Xeon 700 Mhz 2 Mb cache 5/12 V sl49s / sl4xx ( 174449-b21 ) any brand Xeon 900 Mhz 2 Mb cache 5/12 V sl4xz ( 222627-b21 ) any brand Xeon Dp 2.0 Ghz 400 FBS sl6em ( or any other step ) Xeon Dp...

Greetings: We had two drives at ID 0 and 1 configured as RAID 1 on a smart-2/p controller; I needed to work with this file system from another o/s so I removed these drives (set them aside) and installed two new drives in ID 0 and 1 and configured the controller for RAID 0 on them. I then did an...

Hi All, I am trying to repair a Compaq Armada 7400 I have been given, unfortunately I don't have an AC Adaptor for this machine - Does anyone please have the pin out details for the PSU connector. I believe that one pin is ground two others are actual DC supply voltages and the 4th pin is a logic...

I have problems with my 5500r 4*200 PPro. What I think what happend: A week ago I rebooted the 5500r but left in the POST with "Press F1 to continue". A day or so later it was automaticly powered off! And I think it said something like "system powered off" on the diag LCD. Then I had problems...

We just inherited three Storage works 4354R enclosures, two Storage Works SAN Switches 16-EL. I have no software, no manuals, etc. Can someone please provide any helpful information possible, like what software is necassary for setting the SAN up and managing it. I am starting research now and...

Hi everybody. I'm looking to put in a second proc in my 6/300-3000. Is it possilbe to put in a 333Mhz and strap it to 300Mhz? Can I put in any slot1 300Mhz with the right stepping and voltage? thanks, Mike

2GB RAM 4 - 18.2 10K RPM SCSI III drives dual 1GHz CPUs single power supply (dual capable!) onsite warranty until Oct 31 2004 !!! $2400 obo - can deliver or meet in AZ (Scottsdale, Phoenix, Mesa, Chandler and surrounding areas)