|
|
GA-7DPXDW-P Incompatable DDR RAM (and) GA-7DPXDW+ (or) GA-7DPXDW-P by
Jim Dalton
The following RAM is (by default) incompatable with Gigabyte Motherboard
GA-7DPXDW-P;
"Kingston KVR266X72RC25/512" 'Infineon HYB25D256400AT-7'
The memory will cause "STOP: c000021a" system error on initial installation
reboot of system, or cause installation to hang at initial "Starting
Windows"...
|
|
1 |
128 |
|
|
Booting from USB HDD by
Edward W. Thompson
Have a GA-8IPE1000-Pro MB (BIOS F2) with WINXP Pro and am trying to
get it to boot from a USB external HDD without success so far. Firstly
has anyone got this board to boot from a USB HDD? At least that will
tell me it works.
The drive is healthy, that is I can read and write to it from WINXP
and...
|
|
0 |
147 |
|
|
GA-8PE667 Ultra Peculiarity by
Scott Clugston
I've been happily computing along using the on board RAID controller for
over a year. I have a DVD and CDR set up as master/slave on the primary IDE
channel. I needed some extra storage and installed a internal harddrive, set
as master on the secondary IDE channel. Now when I boot, after the...
|
|
1 |
313 |
|
|
Help!! Has something in my PC died? by
Wayne
you need to disconnect all the hard drives and pull the video card see if
you get beep codes do the same for memory. If those work and the beep codes
are correct then you will know where the problem lies also check for shorts
on the mobo to the case.
Did you change anything recently?
Wayne
|
July 27th 04 04:39 PM
by tooly
|
3 |
351 |
|
|
|
|
2 |
181 |
|
|
GA-K8S760M ?? by
Billy
I have been seaching around for a good motherboard and came down to the
GA-K8S760M. I am going to build a system for a church office. They would
like to be able run 3 or more programs at the same time. I will install
windows xp. I like to have some input from you on this board.
Thanks
|
July 27th 04 10:55 AM
by Tim
|
1 |
188 |
|
|
Help! Flashed Bios - machine now inert (GA-6BXC) by
Philip Herlihy
I used @Bios to update the BIOS on my friend's machine (well, he's currently
a friend), hoping to fix power-down problems - I'd tried everything else. I
was careful to choose the right version F3 (avoiding the Beta) at:
http://www.giga-byte.com/Motherboard/Support/BIOS/BIOS_GA-6BXC.htm
assuming...
|
July 27th 04 06:45 AM
by Wally
|
7 |
317 |
|
|
GA 8KNXP alarm on: RAM led on and buzzer on by
Bernard W
After having rebooted the PC following the installation of a new PCI
card, the mother board is buzzing constantly and the RAM led is on
I have unplugged the PCI card and rebooted again.
Still this buzzer and Led on.
I suspect an electric shock having caused the problem.
However, the BIOS starts...
|
July 27th 04 06:24 AM
by Zac
|
3 |
237 |
|
|
SATA newbie needs help with GA-8IK1100 by
Simon Robbins
Hi,
I've just put a Maxtor SATA 80Gb drive unto a GA-8IK1100 motherboard since
my IDE drive just died on me. Not having any previous SCSI or SATA
experience I've struggled a bit getting it all to work. The BIOS had no
problems identifying the drive but Windows setup simply said there was no
drive...
|
July 27th 04 06:18 AM
by Zac
|
1 |
273 |
|
|
160Gb shown as 137Gb problem by
Bob Davis
wrote in message
...
My 160Gb drive is showing as only 137Gb. I have a 7DXR motherboard and
when I flash the bios to F10, in the bios settings the drive is
recognised as 160Gb.
I am using Win2k and I know that you need...
|
|
0 |
530 |
|
|
7dxr dual bios problem by
Will Dormann
wrote:
Hello,
I have used the 7dxr with a 1GHz Athlon which I have now upgraded to
an Athlon 2600 (266 fsb), which is the faster cpu this mobo will take.
To use the 2600, you need to have the F10 bios. I have flashed this,
but when I boot, I sometimes see that it is...
|
|
0 |
484 |
|
|
GA-7N400 Pro and Zalman CPNS 6000 Fan by
Allan
I have a GA-7N400 Pro motherboard, XP3200 CPU, FX5200 AGP graphics and two
IDE Hard drives (40gb and 80gb). Windows XP Home
I have just purchased the Zalman Silent Flower Cooler CNPS6000-CU (see
either http://www.quietpc.com/uk/amdcooling.php#6000 or
http://www.zalmantech.com/ )
Firstly after...
|
|
2 |
317 |
|
|
GA-7VA600 by
Pete Rynas
why won't my UDMA (ATA) IDE hard drive post as 133 when i belive the specs
say for both the mobo and the drive that they are UDMA 133 compatable??
thank you
|
July 26th 04 09:38 PM
by tooly
|
6 |
163 |
|
|
What's the ideal MoBo temp for GA-7VT600? by
EA
"Anthropy" wrote in message
...
Mines running about 60c. While I'm here what's the ideal power supply?
Right now its hooked up to 300w PSU.
Thanks for any help.
that is very hot, where are you death valley?
|
|
4 |
316 |
|
|
GA 7N400 Pro2 - IDE3? by
Mark Epps
Guys, i hace the above mb with two hd's as master & slave on IDE 1,
and a cdrw & cd rom as master & slave od IDE2.
I have just been given a dvd drive - can I use this on IDE3?
I plugged it in, but no joy.
TIA for any advice
Mark
|
July 26th 04 07:23 AM
by Mal
|
8 |
167 |
|
|
need help identifying motherboard by
Cut
Sorry for the cross post but i need help.
I'm trying to help out my neighbor with their pc. Since i'm used to dealing
with dells and other pc manufacturers, i've never had to identify specifics
related to motherboards, etc. They have a pc that was built by a friend and
i need to identify the...
|
July 25th 04 05:07 AM
by Monty
|
5 |
496 |
|
|
|
|
0 |
250 |
|
|
GA-7NNXP no VRM Card by
Zogg
Hi,
I've just bought one of these boards as 'refurbished' at a very good
price but it's missing everything except the board itself. I've got
cables etc. and can download manuals, drivers etc from the Gigabyte
website. The main thing that concerns me is the missing VRM card. Will
this board work...
|
|
2 |
122 |
|
|
PCI / AGP lock on GA 7VT880 by
Gil-galad
Hi,
does anyone of you know if the GA-7VT880 motherboard has the PCI / AGP lock
option ?
Thanks
|
|
0 |
191 |
|
|
GA-7N400 Pro Disappearing Raid by
Bear
Okay Now I have a question. I crashed my Webserver last week (software
crash) and everytime I try to reload the raid settings keep going away. I
save them as per the destructions that I used when I set it up originally
but no-go. it does the software load cycle including loading the raid
drivers...
|
July 24th 04 04:33 AM
by Bear
|
0 |
135 |