|
|
Compaq Proliant 5500 won't power up by
Jim Balson
I just bought a used Compaq Proliant 5500 server. I installed Linux on
it and all is working OK. I then wanted to have a look 'inside'. So I removed
the side cover and began to poke around a bit. I removed the CPU's and the
CPU Power Modules. I put them back in, just wanted to check them out.
I...
|
|
6 |
1,878 |
|
|
FreeBSD on DL585 by
Will
Has anyone been successful in running 64 bit FreeBSD on the DL585? If
there are any restrictions what are those?
--
Will
|
|
6 |
500 |
|
|
ProLiant 1600 by
Jeffrey Alsip
Are there any Chicago area people looking for a couple of fully
functional 1600's that they can come and pickup for free? If so, please
respond.
|
|
6 |
313 |
|
|
Anything in the front right corner of a Storageworks 4300 series enclosure? by
Rick F.
For those of you that remember, I won an auction on Ebay for a storageworks
enclosure only to find that it arrived damaged. The damage seems to be only
in the front right corner of the chassis which I think has no electronics
nearby, but wanted to get your inputs. I won't be able to use any...
|
|
6 |
697 |
|
|
301 Keyboard Error - 3 Different Keyboards (all get lights a'flashin') by
Kris
My neice has a Deskpro EN (500 Mhz, I think). It was working, had to
be moved and now I get a 301 error. I have tried 3 different
keyboards and they all flash when plugged in but that's all I get, no
keys work. Then, if I just let the PC sit for a few minutes,
NUM/CAPS/SCROLL will flash on and...
|
|
6 |
506 |
|
|
Compaq ProLiant 4500 by
Mike Kieffer
I have retired several ProLiant 4500 servers. I am currently selling the
parts from them on eBay. If you have ProLiant 4500 and need some spare
parts, you can get them at a deal.
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&include=0&userid=m_kieffer
Thanks,
Mike Kieffer
|
|
5 |
723 |
|
|
Best Gigabit Ethernet Card for File Server? by
Will
I'm converting a DL380 G2 into a file server, and I would like to know which
gigabit ethernet card that is supported for that server is the fastest HP
makes? I assume the opticals would in general give better performance than
the copper based cards? How would NC 6136 compare against...
|
|
5 |
651 |
|
|
Converting RAID 0 to RAID 1 DL380 G2 by
Will
I have a boot device in ID=0 on a DL380 G2 currently configured by the Smart
5si RAID controller as RAID 0. Is it possible to insert a second
identical device and reconfigure the existing RAID 0 volume to RAID 1
without losing data?
--
Will
|
|
5 |
728 |
|
|
Is HP Spare 404714-001 Same as Option 286776-B22? by
Will
I received a new in box HP 286776-B22 unit whose internal drive was marked
as spare 404714-001. I can't find any technical documentation that shows
what option numbers are sold using that spare number, and this is not the
spare I have seen used for this option number in the past. Does...
|
|
5 |
239 |
|
|
Proliant 2500 PCI Video card question by
VinceV
I have 2 Proliant 2500's with dual PPro 200's and Smart Arrays. I'm
lookint to install a linux distro on them and will be using several
GUI applications. The on-board video is definitely not up to the
challenge based on my initial testing.
Does the Proliant 2500 support an add in PCI video card?...
|
|
5 |
972 |
|
|
Raid level 1+0 problem by
[email protected]
Hi,
I'm setting up a new HP server DL 320 G4 with two ultra scsi disks.
My goal is to use raid 1 to have full redundancy.
I used Array Configuration Utility 7.30.90.0 to configure a level 1
raid.
ACU says this:
Logical Drive 1 (34727 MB, RAID 1+0).
|
|
5 |
310 |
|
|
Ping Nutcracker by
Robert Bates
Nutcracker- you talked me into upgrading my 5500s. Is there are cross
reference that shows all of the part number super? I have found a lot of
228471-001 memory on eBay but it doesn't match what they show he
http://h18000.www1.hp.com/products/quickspecs/10279_div/10279_div.html#Memory
|
|
5 |
345 |
|
|
Proliant 7000 on eBay can it really be upgraded to Xeons? by
Jason Arthurs
This looks a bit of a beast of a server, and not too far from me
either. The guy quotes it as upgradeable to Quad Xeon processors but
it's currently running Pentium Pro's is this possible?
http://tinyurl.com/73u3v
Regards,
Jason.
---
Replace nntp with my name to reply.
|
|
5 |
396 |
|
|
|
September 12th 04 12:21 AM
by jcassel
|
5 |
761 |
|
|
Compaq Smart Start CD by
wolf242
Nut Cracker, I am also searching for a SmartStart 5.5 CD. Need it ASAP,
Can you help?
|
March 19th 06 10:49 PM
by Paul
|
5 |
405 |
|
|
Compaq proliant 400 setup by
onnotche
Hello there,
I want to set up my old proliant 400 with 2 scsi hard drives. For the
moment the OS (NT4) is on an IDE drive. When I replace the IDE drive by
the SCSI drive, NT4 setup is stops because no hard drives are found (it is
possible however to install XP). I suppose this is a controller...
|
|
5 |
213 |
|
|
ProLiant 800 and hitting F1 by
Steven
Hello,
I inherited an old ProLiant 800 server, and wish to install FreeBSD on
it. Unfortunately, it keeps giving me a boot-time prompt, where I must
either hit F1 or F10. Unfortunately hitting F10 tells me that it can't
find the utility, and we didn't inherit any of the setup disks.
What...
|
|
5 |
467 |
|
|
SmartStart 5.5 ISO by
aarne
Hei, can anyone refer to a link where to download Compaq SmartStart 5.5 (or
older) ISO file ? I need to set Raid for Pro Liant 1600 server. Thanks for
helping.
|
|
5 |
520 |
|
|
Proliant 1600 second CPU ? by
Dirk
Hello esteemed group,
I have a Proliant 1600 with a P2 350 MHz Slot 1 processor.
I have another P2 Slot 1 processor of 450 MHz.
Is it possible to use them both or do they have to be of the same
speed?
Any problems when running Linux on it?
Thanks in advance,
Dirk
|
November 13th 04 11:52 PM
by Conny
|
5 |
585 |
|
|
Tape drive? by
Askalon
what is everyone favorite? I am thinking of going with a Travan 10/20 but
need to look and see what my server will accept (SCSI or IDE).
Just thought I would ask to see.
|
February 25th 05 09:10 PM
by alewis
|
5 |
182 |