Hi all, I have an ML530 server with several indicator lights in the power switch (fans, power, etc). Recently after an upgrade (CPU) I noticed that none of these lights would come on. I have retraced the wiring and all seems fine. I have also disconnected and reconnected the switch to no avail. It...

My Proliant ML 370 Gen 1 has crashed and given me the error 101 ROM IO Error when I reboot. Where do I look for the problem? It has a Compaq 431 RAID controller with 5x9.1 drives.in a RAID 5 configuration. I have green lights on the drives. I do have the onboard chip I can use to replace the 431...

I just picked up a PL2500 PPRO machine with 1 processor, 256MB of memory and 5 X 4.3GB hard drives from Goodwill for $6.06 last week. I went online and found an upgrade kit for it to bring it up to daul 333MHZ PII with 3GB of memory for $52.50 from Memory4Less. Question: The processor kits that...

Does HP make a RAID controller for SAS/SATA that supports the use of an internal and external array concurrently? The external port on the P600 is disabled when an internal array is present. -- Will

Hi All, Has anyone tried an upgrade to windows 2008 full server? I have an ML370G2, but I have not seen any driver support on the HP site for this generation hardware. In particular any support for a RILOE2 is server 2008? Thanks, Doug

The processor kits that I bought (from Trademoon for $16.50 each) came with 2 ROM chips each. All four chips are a different part number. No documentation was provided (the boxes were new and still sealed). Does anyone know where the ROMs go. The Upgrade also comes with 2 ROMS, but...

When we login to the ILO, where and what are we supposed to click on to force the server to reboot when it's hung? We are testing this by having the server boot onto the SmartStartCD instead of crashing a live Windows 2003 OS, even though this is not (yet) a production server.

Hi everyone. i hope got some directions from yours, i try to use the Redundant power supply of this server with my standard ATX Motherboard, these backplane got's 2 power connectors like WTX Standard but, theres no concordance with the voltage signals of this. then i try to find in the entire...

Got a friend selling these pretty cheap, thought I'd pass it along. 20 Pin ATX Tester CoolMax 20 pin ATX power supply tester. Quickly isolate and verify power supply failures. Checks all ATX output voltages, +3.3V, -12V, PG, +12V, +5VSB, -5V, and +5V via LED light. Also checks 4 pin peripheral...

I need to add RAM to a server - is there a way to see which slots are used? We have a few old DL380's G3 a few DL320's G4, and one very recent ML350. Thanks!

On a P600 controller, after rebooting it has inverted all of the logical device numbers! Drives were ID=0 ID=1 and ID=2. The 0 drive is now 2. The 2 drive is now 0. How is this even possible? How can you recover back the original drive order? -- Will

Hi.. I'm hoping to pick your brains a little.. I'm looking towards enhancing my Proliant 6400R to something that has more than 4 drives and am looking at the 4314R Storageworks enclosure. In looking at these on Ebay I found that some have Ultra-2 controllers and others have Ultra3 controllers,...

Hi all, Well I went to work on the ProLiant 3000 yesterday. It is actually about 40 miles from where I live. I took my newly SLOWLY burned SmartStart 5.5 cd and a Debian Internet install ISO cd. I inserted the SS55 into the cd drive and fired up the machine. It booted and I got the graphical...

Hi all.. Since I'm pondering over the purchase of an upgraded filesystem with possibly a new controller, I've got to deal with moving my existing data (on 4x36.4Gb drives) to the new drives (either 2 or 4 of 146Gb drives). What I'm planning on doing is using my recently acquired DLT 35/70 tape...

Looking for a good hosting provider? The following site lists today's best selling hosting providers for shared and dedicated hosting. http://hosting.woohoow.net Have fun comparing, and make a good choice! TIP: 1&1 (Of which I can say they really offer reliable solutions) is currently offering...

I have been using this computer program for a couple weeks now and i am very pleased with the results so far. its a software fatloss program, if your looking for a diet/weightloss plan i reccomend you check this place out first: http://fatloss9.50webs.com

Hello I have a DL380 933mhz 512megs, right now no hard drives. A little history first. I had this server in storage for a while. I was going to put Linux on the system, but decide against it. When I took the server out of storage at first the server would not power on at all. The power light would...

Does anyone happen to know if there is a power supply blank slot filler for the MSA 50? Power supply for that system is 377230-001. -- Will

Does anyone know if the DL385 is allowed to run Windows 2003 32-bit with TWO P600 adapters? We have one of these with cabling to the internal SAS 2.5 array in a DL385 and the second one has its external port attached to an external MSA50 2.5 SAS array. We mirrored the boot device across the...

Hello NG, i found on my favorite onlinedealer a ML330 G1 with an CPU with 1266Mhz. I have an 933Mhz CPU in this Server, i try to exchange the CPU with an 1133Mhz CPU from my ML370G2, but the CPUtpye doesnt work in the ML330. Anybody have an idea what is wrong? thanks Kira