This is a warning on my Vista Ultimate system. The HPET in the bios is set to 32bit. GA-M57SLI-S4 motherboard. ---------------------------------------------------- Log Name: System Source: Microsoft-Windows-HAL Date: 3/8/2008 11:26:33 AM Event ID: 1 Task Category: None

Hi all, I have a GA-M61P-S3 motherboard and today when I went to boot up the power led came on and the hard drive led came on and stayed on solid, no POST beep, no splash screen. I tried a few things to no avail, then removed the cover and moved the SATA cable to SATA 1 slot. The system booted...

Any comment and experience with GA-81875 Ultra motherboard ?? Thanks.

A crack, and the machine powering down, then a hint of fried semiconductor in the air... it looks like one of the voltage regulators on my GA7VRXP has cratered. Is this a common problem with these boards? I suspect one of the nearby electrolytics has failed, and I think it may have taken the CPU...

Hi all, How can I get an external USB2.0 hard drive enclosure working in WinXP pro with service packs? The USB Hard drive is not detected, & does not appear in My Computer. My setup a- Gigabyte GA-7VAX1394-A, 1Gb RAM etc...

I'm currently using the F8 BIOS on my GigaByte GA-K8NSNXP-939 motherboard. I'm using this because the Sil3512 bios embedded in it gives the best Norton Ghost performance in DOS. Is it possible to extract the Sil3512 BIOS in the F8 BIOS and put it into the F13 BIOS instead? Thanks --

Is the 8KNXP ver 2 better able to support ultra low latency RAM better than ver 1 of this board?

Hello! I finally got rid of my Soyo Dragon+ Via KT266A board and I had high hopes I can get rid of all the problems it made but it seems my problems just got worse with the KNXP :( Here is the biggest problem I have at the moment and my setup: * KNXP with P4 2.4C and 1 GB RAM (2x 512 PC400) *...

Re Bios version 10, where can I access it? I recently tried to flash upgrade using the CD which came with the MB when I originally bought it 2 years or so ago. I remember finding this so much easier than a previous method. Anyway, this time this preferred method gave me a number of Internet...

Seems i have encountered a problem with the new F5 BIOS for the GA-K8NXP-9. I had F5i installed and a reset to factory defaults before flashing to F5. The BIOS flash to F5 was sucessfull and everything is working as it should. However i only flashed the main BIOS and tried to flash the backup, but...

In relation to the GA-K8NXP-9 motherboard. I see no major difference with this BIOS over the previous F5i beta BIOS. But one nice thing i did see added was during the main BIOS page there is new information displayed that says "memory controller - dual channel, 128 bit". This is new and was not...

Wow ... f7 bios released ... quoting "Support intel Prescott and P4Extreme family CPU" GREAT !!! Thanks GigaByte !!! Andres Zanzani Rimini, Italy

has anyone used the f9 bios yet? i've installed the f8 bios crippling my machine because it was meant for the ultra version, and not the non ultra version - in which i complained and though they never replied they did come out with this new version. so before i mess up my machine again, has...

The new BIOS for the K8N Pro board seems to require a repair install of WinXP after flashing. The website says it has a fix for a cpu voltage problem. Seems like I should update, but what a pain the OS reinstall is. Has anybody used the F9 and is there an improvement in performance. Is anybody...

I flashed from f6 - f7 - f8 - f9 and it actually booted reading my raid array. One thing though my dmi reads f6 12/25/03. Huh?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=40158&item=5231589018

I have had a second complete failure of mainboard and cpu. The first time it was a Gigabyte GA7N400Pro2 with Athlon XP2700, the second time a Gigabyte GA7VA with Athlon XP2200. In neither case did the psu fail, the RAM was OK afterwards, and so was the hard drive, CDRW, FDD - and even the PNY...

I'd like to get some help with a fan connection problem. I have a Sonata II case and a Gigabyte GA-K8N Pro SLI motherboard. The case power supply has a 2 wire lead that is for fan speed monitoring but I'm not sure where to connect it. Any ideas as I have a choice of Sys fan, Pwr fan or NB fan?

Hi. Has anyone a idea which is the best solution for a new fan? has the old heatsink a self adhesive pad? the fan gets louder and when i let the fan off the chipset gets warmer. MB is not overclocked. Martin -- Voice box/ Fax: ++49(0)1212512052031 12 C/min.

The fan on the Northbridge is making a bussing sound... the only way to stop it is to give it a little tap. I tried blowing it out with air but that only works for a day. Is there a way I can replace the fan? http://www.hw.by/images/8IK1100/_board.jpg On the above link, the fan I'm referring to...