Does anyone know if a 3.0 gig Prescott will work in an 8KNXP (rev1.0) with an F10 bios update? Thanks, Al Combs

Hi all, I'm trying to edit my short film. We're having problems with the playback. The video is playing back a lot faster than the audio. What's the deal? Has anyone seen this before? Thanks

Just installed a 3.GHz Prescott, its idle temp is 50c and at full load its 65/67c . I'm using the Intel heatsink and cooler and the fan is running at 2600 rpm or there abouts. Does all that sound about right?

Just installed a new 250gb seagate ATA/100 hard disk model: st3250823a running windows xp pro. For some reason it seems to be stuck in PIO mode 16.6 mb/s and is realy slow. I can't seem to change it to UDMA mode. My second hard disk (primary slave) is a 120gb seagate and thats running fine in...

I have small issue with a new PC using the 780g HD3200 chipset. After resuming from standby, HD H264 video will not play, just a blank screen, and I think it is due to the DXVA acceleration not working. If the PC is rebooted, then all is fine again. As this is an HTPC, I use standby...

First, congratulations to Russel Sullivan, Taliska & others in this Newsgroup for their detailed hints on how to work the thing out. However, I've been through all the posts, and I am still missing something to make it work! Recap of the problem: Got me the GA-8KNXP Motherboard, Rev 1.0, BIOS...

I've installed the GA-VT600 1394 motherboard and now after taking the oppertunity of reinstalling WindowsXP I've ended up with a problem Network Controller device. Under Device Manager it tells me that; The drivers for this device are not installed (Code 28) Location: PCI bus 0, device 16,...

Norton Internet Security 2004 seems to upset certain of my Internet Explorer sites. Eg when I go to www.gbt-tech.co.uk to download gigabyte drivers the driver pages won't come up. See http://www.gbt-tech.co.uk/Motherboard/Support/Driver/Driver_List.htm for example. When I uninstall NIS2004 the...

I have an nForce 4 board networked to an nForce 3 board via an SMC gigabit router. The router indicates that the nForce 4 board is talking at 1000, but the nForce 3 board will only connect at 100. The Motherboard specs show that the on-board LAN is capable of 10/100/1000 ethernet, so does anyone...

If I enable "Wake by alarm" and set the time to say 08:30:00 so the PC will be ON at start of the day, then I always get a BSOD (WinXP Pro sp2). If I start the system manually at around that time, it starts normally. Am using Kingston KVR800D2N5/1G DDR2-800 1GB RAM - might be relevant Any clues?

Is it possible to enable usb 2.0 on the onboard usb ports ? Or if someone knows how to connect the extra usb 2.0 ports plz answer I'm trying to hook up a USB 2.0 compatible device (an mp3 player/hard disk) to my computer. I've downloaded and installed the latest drivers from gigabyte's site The...

I've built a new computer around the GA-8KNXP Ultra-64. I have an ASUS DVD-E616P1 with an ACard AEC-7900A SATA-to-IDE Converter, a Plextor PX-712SA (SATA) DVDRW, and three Western Digital SATA hard drives (2 WD740GD Raptors and 1 WD2500JD). As you can see they are all SATA devices. One would think...

I have been experiencing a problem with the ITE raid portion of my 8knxp for awhile now but it becomes untenable when I begin to run World of warcraft. I have 2 identical 80gb hard drives striped on the array as the hardware details will show. When I run World of warcraft the raid begins shutting...

Hi there, I have a problem to update the AMI-BIOS GA-7IXE4.F7 to GA-7IXE4.F9 or GA-7IXE4.F8. It doesn't matter if I using the tool @BIOS or the original FLASH-Program. After approximately 12% the update stops and then there will happend nothing, without any error-messages. The AMIBIOS-Setup...

I've got Gigabyte GA-81915G PRO motherboard and on-board sound C-Media 9880. Recently I installed TV Tuner AverMedia 303/403. Unfortunately I can't hear any sound from my speakers. I checked TV Tuner's audio-out and it's working properly. When I connect Tv Tuner's audio-out by cable to Line-in...

Hello. I have a problem with booting on EP45T-EXTREME. I suspect eighter the CPU or motherboard (since the only communication with the system in through the motherboard I ask here): - The diode showing CPU temperature is showing 60° C - The diode showing CPU load is showing near 100% load - The...

Hi I have a GA-7N400-L motherboard that doesn't boot at all don't even see the bios any ideas? No beeps nothing and its the third board so i'm begining to think its me. Its got a Xp2800 processor in it. Also if the dvd drive is connected the drive won't open. Any ideas?

Hi, I bought a GA-7S748-L mobo and a Sempron 2400 to upgrade my sons PC. It worked ok at first but kept freezing. Checked it out and noticed that the chip was running hot - 67C at startup - and that the system froze once it got over 70C. Checked the BIOS and was running with F4. Looked up...

Hi, I've got a GA-7VT600 1394 that I can;t seem to get to work. No matter what I do I get the Bios beep alarm that means cpu overheat. (The up and down tone). The system runs for about 4 secs then powers down. It's never got as far as even loading the BIOS. The CPU is a brand new Athlon 2600....

Hello i am a newbee here, i am sorry if i bother you , i have the following PC Parts GA-7VT600(-L) motherboard with bios version F6 AMD Athlon XP 2600+ System memory 1G RAM NVIDIA GeForce 7800 GS (256MB) so my problem is that i have changed 2 graphic cards. I had a Geforce 6600 and some day my...