Hi all New to computer building, just put together a 2.4 system with a radeon 9500 card on a Sinxp1294 board. All running great. Question: is it possible to connect the front audio connecter and still use speakers connected to the back of the machine? Thanx in advance for any help.

I have exactly the same problem with unknown device as Wizard of Odd in a previous post. quote In my hardware manager i have an "unknown device" (under Other Devices) with an exclamation point. Clicking on Properties shows me that there is no driver, but the location is "on VIA Standard PCI to...

I have a strange problem. I have a GA-700N Pro MB and was using the onboard Network adapter for my DSL. I flashed the BIOS from F9 to F10 using Q-Flash and everything went smoothly. However, my DSL network connection will no longer work using the built in Network Adapter. I installed a...

I have a GA-8IHXP (Rev 3.0) mobo with a Promise FastTrak TX2000 RAID card and Adaptec 19160 Ultra 160 SCSI card installed, and a Seagate 36GB Ultra160 hard drive hooked to the Adaptec card. For some reason, the mobo will hang when booting into WinXP when both these cards are installed. Whenever...

Hi, got a lost of troubles installing "ite ata raid" driver inside win98se with my new GA7N400 Pro2 (bios F3). I just want more ide ports and not raid functions, but each time I have tried to install the driver system hangs loading it and win98se don't went into gui menu. Which is the right step...

no spam wrote: Hello, I am experiencing an intermittent problem of my PC failing to boot. Other than the boot CDROM light blinks for a few seconds, the problem occurs with only the fans going. There is no initial post, just a black screen. The monitors power light shows no...

www.ocworkbench.com/gigabyte

"Sir Pudgie" wrote in message ... Will a 1.2 Ghz Athlon (Thunderbird) with a 200FSB work OK with a GA-7DXE motherboard. I will have some 2100 DDR RAM also. Anything wrong with this combination, and will the DDR RAM...

This motherboard doesn't seem to like the new video card I bought. I bought a Nvidia GFoRCE4 MX 440 (PCI 64 MB) so that my son can play games. His system is a 1100MHZ AMD XP processor, the Gigabyte GA-72xe motherboard, and 384 MB SDRAM running Windows XP Home.The card doesn't seem to be recognized...

Howdy folks, Just a quick question as to what command do I use to update my Video Bios from F1 to F4 in the readme.txt of the flash utility is says as follows: Using FLASH utility follow below: ATIFLASH -p 0 Filename For example, file name is AR64S.F2 in drive A:. The command is:

Howdy , there doent seem to be many posts on this mobo. Its either a close to faultless mobo or rare mobo to find. I have this board , i cant say much about the sata raid as I dont use it but as for everything else it runs flawlessly with WinXP pro Mine is used primarily for games and the only...

Anybody have any good to ideas to get abovementoned MB to work? When powering on, all fans start spinning, lights (keyboard) blink as they should, case lights turn on, HD starts up, BUT no signal to monitor, no beeps, nothing.... I haven't yet seen the machine closely (it my friends), so I don't...

I needed a board with extra ide controllers as I've got too many hardrrives, Just had a look at the specs on these boards: seem really similar. Both have the ATA (non serial) raid option, the GA-7N400 Pro doesn't have 2 network cards but that doesn't bother me at all. The 7NNXP has some...

"TwinMOS 1GB (2x512MB) DDR PC3200 Dual Channel Kit (MY-007-TM) The new DDR 400 dual-channel kit comes with a pair of modules that have all been verified in the dual channel environment and proved through testing to achieve high performance and stability especially when working with Pentium 4 / FSB...

I have the same mobo and CPU you're contemplating, only with 2gb RAM, a Matrox G450, on-board sound, CD, CD-RW, Zip, and 2-3 HD's installed. Check this out: http://www.jscustompcs.com/power_supply/ My system configures out to require 400-430w, depending on whether or not I have a third drive...

I am building a new computer, and the system will power up, but not boot immediately after being powered off. It seems I have to wait quite a while, like 20 minutes before the machine will boot. When it powers up after being shut down, the fans spin, the drives have lights, but it never beeps, and...

Hi: I have set my GA-8KNXP to run two Western Digital 7200 RPM, ATA 100,80GB 8MB Cache, Special Edition Caviar on a Highpoint RocketRaid 100 PCI card as a IDE RAID 0 configuration. They are shown as one 152GB hard disk on my PC. My question is this: If I want to create multiple partitions on that...

I can not get the BIOS to detect the ICH5R so of course the windows method will not work. However pressing F6 during boot up does nothing. I have one SATA drive on SATA0_SB, On-chip SATA set to manual, SATA Port0 configured as IDE Pri. Master. If I enable the SATA RAID Function then my hard drive...

The subject basically says it. I've reset the bios, tried a couple different drivers. The gigabyte website says to use some Sigmatel drivers, these register as not working properly. Its kinda silly, thats with a manual install. The automated installer doesn't even install anything it seems. The...

The manual says that the CPU Smart Fan Control, when enabled, will run the fan at low speed when the CPU temp is below 40C and high speed when the temp is over 40C. The problem is that whenever I first turn on the computer, the temperature always starts at 40C and goes up from there. I have never...