I am trying to look about ways to upgrade the BIOS of my Gigabyte motherboard (to fix video card issues I outlined in this thread), but I cannot seem to find the exact motherboard on the Gigabyte website. This worries me somewhat, since I most definitely don't want to make a mistake here....

Help! My Gigabyte Ga7N400 Pro was started up about 9-03. It died abt 11-04. I have a GVR92128VH AGP, An AMD XP2400, with one SATA 160Gb drive, and one ATA24Gig, 512 meg of DDR PC3200. Everything was going fine until, no video. Multiple restarts, power down, disconnect, etc, no help. Pulled...

I'm having a few problems adding additional memory to my 8IK1100 based PC. When I originally built the machine, I put 2 * DDR400 512Mb modules in it (slots 1 and 4, running as Dual Channel). I now need to add an additional 1Gb into the machine, so have tried adding another two 512Mb DDR400 into...

Hello, I have an 8gpnxp-duo with 2 corsair DDR2-PC5400 Modules(2X512Mb-matched pair). In the manual Gigabyte discribes how to set the memory frequency to 3 times host clock, but in my bios (F5) I only see 1.66, 2.00 2.66 and AUTO. When set to AUTO the frequency is 2.66 x hostclock(200Mhz) and...

I just built a system with a GA-7VT600 1394. Case & CPU seem to be running a little warm. Have an 80mm fan sucking air in the front a one exhausting out the back. AMD Athlon XP 3200+/400 fsb Gigabyte GA-7VT600 1394 (2) WD Raptors 36.4 & 74 1 gig Kingston Ram PC 3200/400 Themaltake butterfly, dual...

WHAT I HAVE: GA-7VTXE+ motherboard & a AMD Athlon XP 2100 CPU. THE PROBLEM: Will not boot to CMOS (I really can't tell because I get no video). CONDITIONS: I now have them out of the case on a table with only the power supply, memory and video card installed.

after a month or so they replied and gave me a new bios for my mobo! The bios fixed nothing, the GTS site only allows one reply and no edit. that's impressive...

wrote in message ... Spooljk.exe contians the Torvil worm: W32/Torvil.d @ MM http://vil.nai.com/vil/content/v_100758.htm W32.HLL.Torvel.B @ mm

Is there another website from which I can get newer drivers for the GigaRaid controller on the 7n400 Pro ? Thanks, - NuTs

I'm trying to monitor my CPU temperature... I have temp1 temp2 and temp3.Which one is the CPU temp? That all read completely meaningless temps, t is at 700C, 2 fluctuates between -600 and 700C and temp3 is 750C.How can I configure this to work correctly?

I have a machine with a GA-K8N motherboard and AMD-64 3000+ processor, running as a unattended server. Over the last couple of weeks it has unexpectedly powered down, always in the middle of the afternoon. There have been no messages in the system log. Its just getting into the Aussie summer and...

Hi, anyone having an idea why my 7dxe board doesn't like my new radeon agp card? An old tnt2 in agp-4x mode works fine with the 7dxe and the radeon card also works fine in 4x mode in another mainboard (even older sis735 chipset). When I plug in the new card, the system just complains on startup...

I just bought the GA-K8NS Ultra-939 along with an Athalon 64 3000+ in a retail box w/fan. When I hooked everything up, the CPU fan died after about 10 sec. at the second POST screen. I took it back to the vendor and after a lot of experimentation, and our 3rd GA-K8NS mobo, we figured out that the...

Well, is there a list in some web? How can I know if my 2 Kingston modules are incompatible with this board before I buy it? Thanks and excuse my english ;)

Hello, Has anyone been able to get 2003 server installed on this board, while using the GigaRaid controller? I setup a floppy boot with the XP driver (thinking it would be a better fit than the 2000 driver), but the windows setup tanks on the floppy disk. Thanks for any assistance, - NuTs

I have been getting a lot of loud fan noise coming from somewhere. 1. It's either the new Enermax 480W Coolergiant PSU. 2. Gigabyte's GA7-DXR northbridge fan. But somehow I just can't believe that a 40mm fan could make so much noise and vibrate the case where the cards are and underneath the...

http://www.station-drivers.com/page/intechip.htm It's version 4.6 dated September 26th 2004. I updated them and they are legit and WHQL'd. Also an updated Intel Application Accelerator Raid Edition is also available, installed this also to check and it is legit. For some reason though i am...

http://forums.viaarena.com/messageview.cfm?catid=13&threadid=62022&enterthread=y

Hi, What is the general experience with Gigabyte's Support answering questions posted on their web site. I posted a question 3 weeks ago about the high VCore voltage on my 7N400 PRO2 (Rev2) Motherboard, but the mail hasn't been checked after 3 weeks. Is there support this slow? I am getting...

Has anyone got a 6800GT to work with this motherboard? M/B= Ga7va ver 1.0 (kt400 chipset) Ive just bought INNO 3D from dabs and it wont install, even showing screen corruption in the bios screen before windows loads etc.. Cant find any compatibilty issues on the web. Updated via drivers etc.....