BAD BIOS CHIP FLASH? VISIT: http://bioschips.nlan.org For Replacement chips $15 re-flash of existing chip $8

Hey Happy New Year I got a Gigabyte 7n400 pro 2 and a sound card : Creative SB audio PCI 128 the onboard Audio AC97 and the gameport are set to disabled and my Creative SB game port can't work because he can't find ressources ( Code 12 ) I wanted to use my Sound Card game port so could you help...

I have a 8knxp ver1 (was running a 2.8 northwood)i decided to upgrade t a 3ghz Prescott,i had loads of heat issues,cpu idling @58oc i windows,start a game temp alarm goes off!! cpu reports 75oc+,a frien of mine has same board but a ver2,so after pulling my hair out, thought i'd try it in his,26oc...

When I use the advanced setup in the BIOS of my 8KI1100 Rev.2 I found a setting called PCB Parking which can be enabled or disabled. I cannot find out anything from the web or the manual therefore can someone advise what is the use of this setting? The setting is in the same page of the memory...

would the above work okay, as i don't know what can be o\c on this m\board to get the cpu to work thanks

Another one for the Gigabyte board: http://www.giga-byte.com/Motherboard/Support/BIOS/BIOS_GA-K8NXP-SLI.htm

For the Sil3114, can anyone locate drivers for the Sil3112A? http://www.siliconimage.com/support/downloadresults.aspx?pid=28&bios=0&drivers=1&sataraid=0

Hello, I've just built a new PC together: - Mainboard: GigaByte K8VT800 Pro - CPU-cooler: Arctic CPU Silencer Ultra 64 TC - Power supply: Enermax EG365AX-VE(G) FMA Both the CPU Cooler plug and the power supply fan plug have a sense wire (white), I guess that's for reading out the RPM.

Wrote to the group several weeks ago about a new computer I built rebooting quite frequently. I have run out of things to check. GA 7VT600-1394 mobo AMD 32100+/400 PC 3200/400 (2) 512 sticks Kingston value ram. Quadro FX500 video card Thermaltake silent boost on CPU Thermaltake PSU, 480W

Lots of updates, manuals BIOS etc. http://www.giga-byte.com/MotherBoard/Products/Products_GA-K8NXP-9.htm http://www.giga-byte.com/MotherBoard/Products/Products_GA-K8NXP-SLI.htm http://www.giga-byte.com/MotherBoard/Products/Products_GA-K8NF-9.htm

To be used with the Gigabyte nForce4 Ultra board, which i shall be getting in January :-) http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Software=True

Can someone give me a link to download the Win XP SATA drivers for the GA-8KNXP. XP asks for the drivers on floppy when doing it's install. They are not on the supplied CD. Thank you.

I've tried everything and still can't run 8x. 4x is fine and stable. Has anyone else had this problem? -- Jim Davis, Nature Photography http://jimdavis.oberro.com/ Standard Poodles for fun BMW motorcycle for pleasure

Adrian Stuart Wrote: "peteec" wrote in message ...- I have a 8knxp ver1 (was running a 2.8 northwood)i decided to upgrad to a 3ghz Prescott,i had loads of heat issues,cpu idling @58oc in windows,start a...

I have the k8ns ultra 939 64bit mobo with 3500 64 bit AMD and 2 stick of kingson 512 ddr,fx 5900,wd 80 hd This runs about as fast as my old 2800+ barton core 32 bit on a ms mobo I'm not sure but I that I have the bois set right. opening screen says 200mhz if I have the bios set right then I...

I have the error detected by the "New Hardware found wizard" of Win XP related to the Secondary Channel of IDE. If I check the device from the Compuer Management/Device manager/IDE ATA/ATAPI controllers" The secondary IDE channel properties screen display: Device type: IDE ATA/ATAPI...

AOA; i am using 40 GB harddisk on 8IDML motherboard but when i connecte d 120 GB segate harddisk it worked fine but when i connect both 120 GB and 40 GB only 40 GB was detected !! why ?? how can i connect both hdd's? Whats max limit for hdds on this board? Any suggestion about this board will be...

recently i purchased the ULT31430 memory kit from Ultra. they're a pair of (2x1024mb) dual channel ecc registered pc3200 dram. the motherboard says to use only unbuffered ram but i didn't realize unbuffered also means not registered. anyhow, is reading registered/unbuffered ram a function...

I can't get any S.M.A.R.T info off my IDE Maxtors attached to the IT8212 RAID controller. HD's support SMART. SMART is enabled on mobo. Have ITE driver 1.7.1.92. Is this lacking ITE driver support or does anyone know a way ? Regards Ronald

Gigabyte K8NXP-SLI + GV-3D1 The first card to incorporate two 6600GT GPU in one card. Will this card run on other PCI-E boards? what is its performance ? Check out the review of the K8NXP-SLI mainboard paired up with the 3D1 card. http://www.ocworkbench.com/2004/gigabyte/GA-K8NXP-SLI/g1.htm