|
|
Problem with hibernation and GA-7VAXP by
Thomas Wohlgemuth
Hello
I use a GA-7VAXP (BIOS F11) with Promise RAID Controller. All harddisks (4)
are connected to the RAID controller. The four possible devices from the ATA
controller connected to CD-ROM and burner devices.
So when I try to set my Windows XP in hibernation mode I get the message the
Hibernation...
|
|
0 |
476 |
|
|
K8NS Pro and memory settings by
Andy
My two 512 MB sticks of Corsair memory don't work on this mobo at 200
MHz. BIOS shows 166 MHz. When I use a single stick I get the full
speed. I cannot set the speed in the BIOS, since the clock speed for
DDRAM is grayed out. When I set it via EazyTune it does not keep that
value. How can I set...
|
October 4th 04 11:22 PM
by Andy
|
0 |
248 |
|
|
K8NS Pro and memory settings by
Andy
My two 512 MB sticks of Corsair memory don't work on this mobo at 200
MHz. BIOS shows 166 MHz. When I use a single stick I get the full
speed. I cannot set the speed in the BIOS, since the clock speed for
DDRAM is grayed out. When I set it via EazyTune it does not keep that
value. How can I set...
|
October 4th 04 11:22 PM
by Andy
|
0 |
250 |
|
|
Can I use a 160 GB hard disk on a Gigabyte Titan 8IEXP with Win98SE? by
Peltio
Hi,
I own a Gigabyte P4 Titan 8IEXP mobo, with 845E Intel chipset and onboard
Promise 20276 raid controller.
Pentium4 1.6A, 256 MB ram, 80GB harddisk, DVD, CD burner.
I know that the onboard Promise raid controller (20276) allows for hard
disks greater than 127 MB, but I wanted to use the 160 GB...
|
October 4th 04 05:02 PM
by Peltio
|
8 |
925 |
|
|
700n pro2 : noisy fan by
CreamX
the fan on my northbridge is extremely noisy. i have taken it off and
cleaned it but still loud.
i am wondering if it is really needed anyway?
|
October 4th 04 01:35 AM
by TX
|
1 |
268 |
|
|
[HELP] K8NS and Microsoft Sidewinder by
Rik
I've recently changed mainboard and CPU passing from AMD ATHLON XP2200+ on
ASUS A7V8X to AMD64BIT 3000+ on GIGABYTE GA-K8NS but now I have a problem; I
can't use Microsoft Sidewinder pro 'cause win XP installs it regularly, but
there is always the tag "Not Connected" on Control Panel so I can't use...
|
October 2nd 04 11:49 PM
by Rik
|
0 |
372 |
|
|
Searching - Help Sought by
Frank Walker
Please assist if you are able:
Trying to identify a MOBO with the following six attributes:
*Socket 7/Super 7
*Intel chipset
*Stable operation at 100 mHz FSB frequency
|
|
0 |
526 |
|
|
|
|
1 |
320 |
|
|
No Cntrl-F1 for 7VM400M-RZ ? by
Gonzo
I purchased a Gigabyte 7VM400M-RZ to replace my trusty old ECS K7S5A since
it finally died.
I see that the 7VM400M-RZ does not have hard drive S.M.A.R.T. turned on.
The BIOS version E3 in my board will not let me do the Cntrl-F1 from within
the BIOS like what the Gigabyte FAQ talks about.
Is...
|
October 2nd 04 01:40 AM
by Gonzo
|
4 |
421 |
|
|
Advice on a motherboard that works with my hardware by
Scott
I know a little about computers, but sometimes I need the help of
experts such as yourselves. I am in need of a motherboard upgrade.
I currently have a Gigabyte 8IHXP. The FSB is 133 and the max AGP is
4X. It is very stable, but I am looking for some speed increases.
I also have 4-256mg...
|
October 1st 04 11:09 PM
by Scott
|
2 |
438 |
|
|
GA-6BXD graphics card by
E
Hi,
I currently have an old TNT2 graphics card in my ga-6bxd machine. I
want to upgrade the card. From what I've read, running agp2x is
problematic at best. Would a PCI based graphics card (eg geforce
MX4000 or Radeon 9200) work instead and if so, how would it compare to
an AGP card??
Thanks,
Ian.
|
October 1st 04 06:38 PM
by E
|
0 |
257 |
|
|
HELP: GA-7N400 PRO 2 and Nvidia FX5500XT by
Andy Kaye
Hi
I'm looking at upgrading my mobo to the giga-byte GA-7N400 pro 2, however I
was wondering if this board has a power point for the power cable for my
Nvidia FX55XT graphics card. If it does not can anyone recommend an
extremely similar board with all the features of the pro but with the...
|
|
1 |
296 |
|
|
K8N loading probs by
amberzonia
I've just changed my 5600XT 256mb to a 9700pro 128mb and now it will
load to the "verifying dmi pool data..." and nothing happens after
that just a black screen.
I've tried swapping back to the other card in case that was the
problem and still the same thing.
Does anyone know what happened and how...
|
|
0 |
289 |
|
|
7n400-Pro2 by
dino
what kind of issues are people having with this?....am looking at running
this set up with an unlocked Barton 2500 and 4 sticks of OCZ
PC3200EL-256..and overclocking is a must..the only reason why I ask is I am
swapping out a board i screwed up , and this one has some nice features.
|
|
5 |
398 |
|
|
GA-7N400-L Bios.. by
Mo
Hi,
I have the Ver 7 Bios on this board.. I have been checking CPU temp before
summer arrives here. I get a 'normal' reading of 55C with a Mboard reading
of 27C using Everest. this is lower than the Bios tells me by 2 - 4C.
I strongly suspect the temp sensors on the board are not giving...
|
October 1st 04 01:13 PM
by Mo
|
2 |
276 |
|
|
Realtek 3.62 installs/doesn't install by
MilesG
I recently downloaded and succesfully installed the Realtek 3.62 drivers and
Sound manager software on a GA-81PE1000PRO XP system at home.
I sent the same file drivers_audio_realtek_whql.exe to my son (not online
yet at University) who has a GA-81PE1000PRO-G XP system. The files seemed to
extract...
|
October 1st 04 09:49 AM
by MilesG
|
0 |
289 |
|
|
SP2 and GA-7n400 PRO, No more CD/RW by
Hervey Cleckley
Ever since SP2 I cannot write to CD/DVD. I removed SP2 and it persists
(since reloaded). I've toggled BIOS versions and settings, Chipset drivers,
IDE, everything.
Is this a Gigabyte/Nforce thing or just my cheap NuTech DDR-082
Athlon 3200, 256HyperX (x4), Geforce 6800GT, SP2,
LG DVD, 2xWD120GB
|
|
1 |
211 |
|
|
Replacement HSF by
Mal
I'm looking to replace my stock XP2800+ HSF as it is regularly sitting in
the 60c range when idle and into the 70s under load. I've got 2 extra fans
in my case 1 blowing in at the front and 1 blowing out the back.
I've been looking at the Thermaltake range and pretty much decided on either
the...
|
September 30th 04 02:59 PM
by Wayne
|
2 |
203 |
|
|
Realtek 3.64 drivers by
Richard Dower
http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Software=True
|
|
0 |
367 |
|
|
New Nvidia 5.10 drivers - install or not?? by
GolfNut
quick question...the gigabyte mobo site shows 2.41 as the latest
version of the nvidia chipset drivers...yet I go to the nvidia site
and they show 5.10. should I upgrade to the 5.10 and stay current with
Nvidia or only install what is on the gigabyte site?
in the past with Abit boards I noticed...
|
September 30th 04 01:54 AM
by dino
|
1 |
806 |