Hello, I will be replacing an Abit KT7A mainboard (socket A, VIA KT133/VIA 686B chipset) with an Abit AN7 mainboard (socket A, VNVIDIA nForce 2 Ultra 400 chipset) with Athlon 64 3200+ processor. The machine currently runs Windows XP Professional. My question is will I have to reinstall Windows...

Just installed a nf7 board with a amd 2600 and when I power up the system the num lock,caps lock and scroll light stay on. The system boots OK but the keyboard and mouse do not work. If I unplug the keyboard before the OS loads and plug it back in before XP splash screen everything works. Any...

Hi I have had this Abit NF7-S motherboard for a year and a half now which used to ru na Athlon 2700 XP 333 FSB with 1024 MB of Kingston 3200 DDR memory. But recently I bought an Athlon 3200+ XP processor and went to install it today. However upon going into the bio and into Softmenu 3 the...

Just ordered the Barton 2500 Mobile and now looking for a board to plonk it into :) I had a Be6 1.0 well still do worked great with my Celeron 433, then went Asus now i think ill go back to Abit. Can a ABIT NF7-S 2.0 handle mobile cpus the mobile barton 2500 ? I want to have access to all...

Abit NF7-S 2.0 read an yellow LED on the mainboard ? This normal two have them both on ? HELLO NURSE.

Hey All, According to the manual, DIMM Slot 1 is the one closest to the CPU, correct? The manual says to use the memory slots from 3-1 in that order and suggests that when using two DDR PC3200 modules that you should put the memory in slots 3 and 2. But when I do this, the machine will not...

Do i need to convert the drive ? will i see a performance increase ? I just ask this becuase i want to know :) All i would have to do is format my C:\ Partition connect the drive up with the cable and Adaptor and reboot with a boot floppy and off i go, format the drive install the OS, al done...

Do i need to convert the drive ? will i see a performance increase ? I just ask this becuase i want to know :) All i would have to do is format my C:\ Partition connect the drive up with the cable and Adaptor and reboot with a boot floppy and off i go, format the drive install the OS, al done...

I have two Abit NF7-S MB computers. One with an Athlon XP3000+ CPU (166 MHz x 13) and the other with an Athlon XP2600+ CPU (166 x 11.5). Both have 2 gigs of memory. The CMOS readings of PC Health status are normal EXCEPT for the -5V value which is approximately -61.99 (it changes a little) on...

MB - ABIT NF7-S CPU - AMD Athlon Barton 2500+ Memory - Kingmax PC3200 512MB HD = Some old 8GB hooked up via Seriallel cable Fans = SilentBoost @ CPU, & a ThermalTake & other high quality 80MM fans Case & PS - New off-brand 350W Set up at Christmas & ran great for 30 days, now just...

Since I bought this board I'm not happy with my computer. 1. Recording audio doesn't work (all scratchy output on file). Playback of audio also scratchy whenever I multitask with even small programs. 2. System lags every 2-3 seconds for about a millisecond. Playing games is impossible from this...

Just upgrading and want to go back to Abit, still have my old BE6 :) Went From Abit to Asus now want to go back to Abit so the board good with that CPU ? What ram do you recomend ? Thanks.

Just upgrading and want to go back to Abit, still have my old BE6 :) Went From Abit to Asus now want to go back to Abit so the board good with that CPU ? What ram do you recomend ? Thanks.

I have the current setup: WinXP-pro/DX9.0b AMD XP2800+Barton R9800XT 256mbDDR SmartVGA / OMEGA-Cat-4.2 Abit NF7-S NForce 2 MoBo(r2)(bios 18 ) 2x256MB PC2700DDR SB Live Value 60g Seagate / 20g Fireball Liteon - DVDx16/CDRWx48 LG 17' Flat Sc F700B

Hi, Just stuck a new system together for my girlfriend and it doesn't work :( All the system fans spin up including the graphics card's and the hard disk spins up. There is no video output, the optical mouse doesn't light up when plugged in to either the PS2 or USB ports. The keyboard lights...

Hi, I bought an overclockers.co.uk kit with an NF7-S Ver 2 mobo and XP2500 - with the intention of overclocking it to 3200, as overclockers guaranteed it would. But I haven't even got that far as I am still trying to set it up at failsafe settings, without success. The first thing I noticed was...

I have an ABit NF7-S and windows XP pro (tried both service packs and a Bios upgrade) I cannot seem to get suspend to ram working Ive tried both settings in the bios, but i always just get windows suspending to disc i really want suspend to ram working. Is this a problem with this board or am i...

Hi,, I have this board running with a sempron 2200, when I try to install a Athlon 3000 it won't go through boot, I have the latest bios, don't know what to do. Advice is appreciated.

Anybody know what the frequency settings are for a 2.4 cpu with this mobo? Abit's documentation is very vague as to the specific settings for this cpu. Thanks

having problems instaling my new board & chipset Abit SG-80 board and P4 630 processor ,and kingston 1gb 184-pin dimm The system will not boot, beeps but monitor stays turned off. have tried it with and without HD but still the same. anyone have any ideas or help to offer please -- pault