|
|
Rack Kits by
NuT CrAcKeR
does anyone have some tower-to-rack kits for the 1600/800 servers?
I have a PL800 with a maxed config that i am going to colocate, and the rack
kit would really help.
Im a cheap *******, so let me know what the damage will be with shipping or
pickup in chicago.
post here, or email to : info at...
|
|
0 |
487 |
|
|
FS: Proliant 5500r by
Dan
Need a reliable server? (File server, Web server, FTP server...) These
systems just keep going, and going....
... I use one as an "on line backup storage" on my LAN. About ever month
or so, I fire it up, backup the data to it, and shut it down again. When the
power is off:
It can't get a...
|
May 1st 04 03:08 AM
by Dan
|
0 |
527 |
|
|
Problem adding a new hard rrive to a Proliant 800 by
Paul
I have a Compaq Proliant 88 with a single SCSI drive, running Novell 4.1.1
and the drive is out of free space. I purchased a new Maxtor 18 gig SCSI and
put it in the computer. The BIOS recognizes the drive when it is booting up,
and the Compaq utility correctly sees the drive, but after that, the...
|
April 30th 04 06:25 PM
by Paul
|
8 |
486 |
|
|
FS: Proliant 4500 by
Dan
Need a reliable server? These just keep going, and going....
... I use one as an "on line backup storage" on my LAN. About ever month
or so, I fire it up, backup the data to it, and shut it down again.
When the power is off:
It can't get a virus.
It can't be hacked into.
Hot swappable drives,...
|
April 30th 04 02:58 AM
by Dan
|
6 |
663 |
|
|
Console Management Controller by
sirio
Hi,
I NEED YOUR HELP!IS THERE ANYBODY THAT CAN HELP ME TO CONFIGURE MY
COMPAQ Console Management Controller? THANKS!!
|
|
7 |
585 |
|
|
bad drive? by
Doug F
Hi Folks,
Lately my ProLiant 6000 has been giving a failed drive message. The
drive will fail, but if reseated it shows up healthy on a reboot and
prompts me for a rebuild. It will happily rebuild all green, then fail
after a couple of hours.
Nothing is showing in CIM except the failure...
|
April 28th 04 02:46 AM
by Doug F
|
2 |
291 |
|
|
bad drive? by
Doug F
Hi Folks,
Lately my ProLiant 6000 has been giving a failed drive message. The
drive will fail, but if reseated it shows up healthy on a reboot and
prompts me for a rebuild. It will happily rebuild all green, then fail
after a couple of hours.
Nothing is showing in CIM except the failure...
|
April 27th 04 11:39 AM
by Doug F
|
0 |
386 |
|
|
|
|
2 |
560 |
|
|
Proliant 4500 parts: The parts worth more than the hole? by
Dan
Ok, when I posted the Proliant 4500 for sale, I got 3 e-mail's, and several
postings.
When I confirmed what the system had, they all disappeared....
So, my questions: Is there a particular part that people are looking for in
a 4500, or just a lot of people asking questions???
Dan French
|
|
1 |
818 |
|
|
proliant 500 and duplexing kit by
Fabio
Hi.
I have found some weeks ago a proliant 5000 with
dual PPRo200, 128M, 4 disk 2.1 gbytes and a duplexing kit.
I'd want to eliminate this kit and return to standard
scsi configuration, but removing the board installed
on the back of the disk backplane is not sufficient
In fact the on board...
|
|
1 |
329 |
|
|
Bad Compaq Presario 700 Hard Drive by
Nathan Bump
Bought my compaq in sep of 02 and had no problems until the warranty
expired (typical, right?) From then on I've had to re-format it 3
times and could never leave it on more than a few hours at a time with
no activity or it would crash. What I'm faced with now is getting a
new hard drive, but I...
|
|
0 |
399 |
|
|
proliant 1600 by
Gerard Oderkerk
I have a proliant1600 with SCSI bay, 2 x 9.1Gb on positon 1 and 2 of the
SCSI bay.
I replaced the second compaq 9.1Gb disk for a 36Gb SCSI IBM disk.
After that the next day the original 9.1Gb disk got its red led on the drive
on solid!!!
I made an image of the first 9.1 Gb drive and put it on the...
|
|
1 |
496 |
|
|
proliant 1600 by
Gerard Oderkerk
I have a proliant1600 with SCSI bay, 2 x 9.1Gb on positon 1 and 2 of the
SCSI bay.
I replaced the second compaq 9.1Gb disk for a 36Gb SCSI IBM disk.
After that the next day the original 9.1Gb disk got its red led on the drive
on solid!!!
I made an image of the first 9.1 Gb drive and put it on the...
|
|
0 |
514 |
|
|
Proliant DL320 and ATA Raid Controller by
Jami
After doing some searches in here, I have read that you can not set a
pci ata controller as the boot device on Proliant systems. However, I
also came across the only system that supports ata hdd's is the DL320.
I happen to have one of these systems, a DL320 G2. Unfortunately the
product that I...
|
|
2 |
445 |
|
|
How to replace the CPU in a Prosignia 300? by
Nelson M. G. Santiago
I have two Prosignia 300 servers, one a Pentium 90 (bought in 1995)
and the other a Pentium 120 (bought in 1996). Both have been operating
perfectly since then, using Win NT.
Differently than the Prosignia 200, the 300 doesn't have switches to
set the frequency and the multiplier (at least I...
|
|
3 |
392 |
|
|
|
|
6 |
358 |
|
|
Compaq Proliant Server problem by
that other guy
I picked up 2 Proliant servers last thursday (4/15/04) in 100% working
condition. One with windows NT 4 server, the other with windows 2000
server. no passwords or manuals, just a single cd package "Server Setup
and management." I used the same CD for both machines and ran the "System
erase...
|
|
8 |
680 |
|
|
HP server spec by
HC
For a project we are looking at doing - does anyone know if or where I can
get hold of a bulk order of HP servers or workstations with the folllowing
spec;
A minimum of 4 32Bit PCI slots
Rack mountable
Hot swap power suppliers (preferred but not essential)
|
|
4 |
596 |
|
|
Compaq Customer Service & Tech Support Sucks by
kevin
First Email
Dear blanked out,
Your feedback is very important to us and on behalf of Hewlett-Packard we
apologize for the difficulties you are experiencing. Your message has been
forwarded to someone who can help resolve your problem.
We very much appreciate you taking your precious time to...
|
|
2 |
1,113 |
|
|
Assistance needed PL1600R by
Bill B
i had a 1600R at a clients site, was experementing with it in hopes of
upgrading thier 1500T.
system had 1 p2300, extra ram card with ram, ( dont recall how much) and
a hard drive with NT on it setup and running.
the client tossed the machine in the garbage by mistake.
now i need to get a value...
|
April 13th 04 04:11 PM
by Larry
|
1 |
769 |