:?: can anybody help , how do i know if Dual Channel is working on my GA-K8NXP-SLI motherboard,the ram is in the right channels and so it should be working ??? but it doesent say on the load up screen,can anybody help ??? :!:

I have purchased a GA-K8NS-Ultra-939 motherboard and everytime I do a Hard Boot my cpu fan fails (right after the first POST screen,) moments after the RAID BIOS screen appears the cpu fan stops spinning, when this happens I do a Soft Boot and the cpu fan will stay on after that. I thought there...

My system has been working okay for about four months, but recently it sometimes refuses to POST. The way to get the system to POST is to remove the power cable, turn off the LCD monitor, plug the cable back in and then I get the POST beep that we all listen for. I sometimes have to do this two...

Hi all ,any ideas on what ram to use for the GA-K*NXP-SLI motherboard,let me know what you are using :?: Thanks Karl :shock:

For background see page 4 of the following article:- http://www.xbitlabs.com/articles/cpu/display/pentiumd-820.html There seems to be a FUNCTIONAL problem with the nF4-SLI(Intel) chip-set if both cores of the Pentium-D 820 are enabled. Applications crash or hang, the motherboard re-boots......

I'm having a problem with my Rev 1.1 board. Every time I plug my new Safecom external HDD enclosure in to a USB2 socket I get a BSOD. The enclosure works in ok in a USB1 socket (albeit at USB1 speeds) but I get the BSOD even if it's the only device plugged into a USB2 socket. I've determined that...

O.S: WinXp pro sp2, full upgraded raid 0 on ide3 with 2 hd maxtor on ide 1 primary master: dvd burner Pioneer on ide 1 primary slave : dvd burner LG i bought a sata hd and plugged on sata port 1 (not on hot plug port) after this plug the Pioneer start work in PIO mode. After many and many retry,...

Hi all, Thinking about getting a second Ledtek GT6600GT and was just wondering what kind of experience people on this forum are having with their SLI setups? Also is it possible to still use all the USB brackets with a second GPU - this looks like it may pose some problems as far as cabling from...

I currently have a Sapphire Radeon 9600 Pro 256mb agp video card and would like to know what would be one to steps up in quality with the same chipset? I want to start playing a few video games and think I need a bit more speed. I also may want to overclock the card. Current Setup: GA-7N400...

I have tried the drivers on Gigabyte's site and Silicon's site and have had no luck, keep getting Code 10 in the device manager for this chip. Anyone having any better luck Thanks John

:( Hi all, i have a problem with my Bios, my mobo is running a AMD FX55 i hade loads of trouble with F7 BIOS so am now runing F6 but when my computer has been off for more than say 3Hr when i swich it on i get an error saying BACK UP BIOS DISCSUM ERRER and then it wrights the bios again, this is...

I also posted this in a SCSI news group: I bought an adaptec 29160 PCI card on ebay. It is a 64 bit card but when I install it in a variety of 32 bit pci slot my machine will not boot. It just hangs up and the video won't even start. I have tried to get my machine to "find it", both with my...

Hi all, The above error message is happening intermittantly (usually at the worse possible moment!) and I have to shut down the 'puter un-plug the CAT 5 cable from the nvidia LAN port on the back of the PC, plug it back in then start the PC. The cable came with the Motorola Cable modem (SB4100)...

http://www.gigabyte.com.tw/Motherboard/Support/Driver/Driver_GA-K8NXP-9.htm They are STILL only listing the nForce 6.39 drivers?...these are old and obsolete. You can download 6.53 dated Febuary 2005. Come now...updated drivers already!!!

Hi all,can anybody tell me the right driver to install for my RAID set up befor i install win xp for the Serial ATA 11 Connectors controlled by nForce4 sli as my Array is useing the nForce4 connection S_ATA_SB and not the Sil3114, :roll: Thanks

Hi I have this motherboard (ver 1.2) and are currently installed 2 ddr sticks (1x128mb and 1x256mb) both ddr2100. Now i would like to add another stick but i can't find sticks at 266(2100) but obly ddr3200(400). My question is:if i install a 512mb ddr-400 stick will it work with the other sticks at...

I have a friend who has recently upgraded an old Gateway GP6-450 with a Gigabyte GA-7IXE4 MB. Now he can not get the system to power up. It has a 200w stock PS which still boots the old board. I think the power switch might be faulty. Can it be disabled in any way?? He does not have the...

http://www.gigabyte.com.tw/Motherboard/Support/BIOS/BIOS_List.htm

Hi .. I have just built a system using a gigabyte 7vm400am-rz motherboard,sempron 2600+ and a western digital 160 GB SATA HDD. However i am unable to get the LED on the case to light up, I have tried both polarities on the LED and also tested the HDD LED by putting it in place of the power LED...

Hi there, I'm new to this NG, so thank you very much so long for your help. I have just bought a PC with a GA-K8VM800M motherboard which I am very happy with. Upon booting, I notice that the S.M.A.R.T. function is disabled on my motherboard. Where do I enable it again? I want this to be...