With the help from Paul on a previous thread regarding how to upgrade my existing computer from 1 to 2 gigs, I purchased ONE 1-gig (single sided) PC 2700 Kingston KVR333X64C25/1G chip. My computer had 2- DDR 512mb PC2700 HyperX Kingston chips (double sided). I placed the new chip in slot three...

Hi, I upgraded a to new Mobo with twin SATA raid hard drives last year. I had a number of problems which I think where down to the SATA chip (most obvious was that often when warm booting it would refuse to recognise the SATA drives). Anyway, last week the boot partition became corrupted so I...

OK, so theres now just one last problem. Cant seem to get my CPU to run at a good speed? I have an AMD Athlon XP 2800+ installed in my GA-7N400 Pro2. With default BIOS settings it reads as a 1500+ cpu on boot-up, so I changed the BIOS cpu frequency to 166Mhz. Now on boot-up it reads correctly as a...

Hello, does somebody have experience with the new 4 Level Smart Fan of the Gigabyte K8-Boards (K8N Pro, K8VT800 Pro)? Can somebody explain the features of the new 4 Level functionality? Gigabyte support sais, it means only, that 4 Fans are supported by Board bios. Is that all? Moritz

Hi all, Does anyone know where I can get the f5 bios for this motherboard. TIA Keith -- "Friends are angels who lift us to our feet when our wings have trouble remembering how to fly." "This email was created with 100% recycled electrons-because we care"

I could not get my sata raid array to work. It would not see the drives. However I did get the intel array working. I would like to use the sata raid though. But when I put my cables on the sata I and II connectors it would not go into setup or boot. Anyone else with this problem?

Hi, got a lost of troubles installing "ite ata raid" driver inside win98se with my new GA7N400 Pro2 (bios F3). I just want more ide ports and not raid functions, but each time I have tried to install the driver system hangs loading it and win98se don't went into gui menu. Which is the right step...

Hi there everyone, I am very very new to this group as I only got my computer put together in the last couple of days with a Gigabyte 7N400Pro and an Athlon XP2700. My friend who built my machine has the same setup and his worked fine straight away. Mine, on boot up, recognises the CPU as an...

I am looking at building this box; MB == Gigabyte GA-7NNXP CPU == AMD XP 3000+ Case == Antec or equiv. w/ 500W PS HD == (2) 80GB Seagate SATA/150 CDRW == Yamaha CRW-F1 Video == PNY Quadro 750XGL OS == Windows XP But now I am stumped on the RAM. I was going to buy two of these Corsair

Don't bother!

Hello : I'm something of a neophyte with building. I purchased this mother board, a new case, and an Athlon 1800 some years ago and have had trouble free service fom it. Recently I added some additional RAM (512) K in one strip and purchased a Sempron 3000+ (Barton Core) from Newegg. Upon...

I have a trusty USB stick which I have used for the last two years with no problems. Today it is suddenly an unrecognized device on each of 4 different USB sockets connected to my Gigabyte 8KNXP rev 2 motherboard. (Windows XP, SP2) It works perfectly in my wife's (my old :-) ) Gigabyte 8KNXP rev...

http://downloads.guru3d.com/download.php?det=1038 For you owners of Gigabyte cars based on NVIDIA.

Does anyone know if this board supports 300+ gb hard disks? Specifically i wanted to buy this HD: HDD EIDE MAXTOR 300 GB 7200 RPM ATA/133 BUFFER: 16MB SEEK TIME: 9.0 MS Thx in advance.

Hello, I have a very loud roaring noise coming from my computer. After testing all the fans, it appears that the noise is coming from the one with Gigabyte 8x AGP on it. When I did a startup without it plugged up, it was super quiet. I plugged it back in and it sounds like a truck again. Can this...

I've built a new computer around the GA-8KNXP Ultra-64. I have an ASUS DVD-E616P1 with an ACard AEC-7900A SATA-to-IDE Converter, a Plextor PX-712SA (SATA) DVDRW, and three Western Digital SATA hard drives (2 WD740GD Raptors and 1 WD2500JD). As you can see they are all SATA devices. One would think...

This MB was originally set up using only the pri and sec IDE channels. PriM 80gb HD, PriS 80gb HD, SecM CDRW and SecS iomega zip 250. I now want to add a DVD player. What would be the easiest way to configure all hardware? Put both HD on a raid and use the CD,DVD and zip on the IDE channels? Would...

I have a 400 Pro w/ the GigaRaid ATA 133 setup. I have setup 2 drives to mirror, and all seems to be OK in the bios. XP however does not see the drive. The properties tab says that the devices are working without conflict, but no drive is visible in explorer. Additionally the Riad tool included...

You've found it.

Gigabyte GA-7ZXE board, does this enable "memory interleaving" by default? Nothing in the manual and the form of Gigabytes doesn't send. Appreciate any input.