Okay, this might be a very stupid question but I'm having trouble getting my Canon i950 to print cards on 6.25" x 9" card stock (Red River paper). Is this a software thing or a printer thing? I tried setting custom sizes but it keeps printing incorrectly and it's getting frussssstrating. Has...

We have 4 computers on a dsl modem/ router but we want to add a printer server so that any of the computers can access the printer whenever they want to. We use a Bellsouth dsl with 4 port caymen router which is located in the downstairs utility closet. I think the printer server will have to be...

I've had an HP deskjet 1220C for about 2.5 years. It has been great but now I have paper feed problems and it wont reliably pull through any paper thicker than 80gsm. Reading the posts on this group and elsewhere I see this is a common problem with HP deskjets and the 1220C in particular. ...

I've had an HP deskjet 1220C for about 2.5 years. It has been great but now I have paper feed problems and it wont reliably pull through any paper thicker than 80gsm. Reading the posts on this group and elsewhere I see this is a common problem with HP deskjets and the 1220C in particular. ...

Hello, I'm having a strange problem since this afternoon. My Canon i320 doesn't print anymore. Its last print was done at 15.30 approx. and from this moment it doesn't print anymore. The system (Win XP) doesn't signal any error in the printing process, the paper is pulled normally page by page,...

Hello, I'm having a strange problem since this afternoon. My Canon i320 doesn't print anymore. Its last print was done at 15.30 approx. and from this moment it doesn't print anymore. The system (Win XP) doesn't signal any error in the printing process, the paper is pulled normally page by page,...

Hi! I've faced the following problem both with my Canon LBP-460 and LBP-660 laser printers: 460: When printing, the printer drags all the sheets in the tray at the same time. If there's too many sheets, they (naturally) can't make their way through the printer but they jam. 660: Sometimes the...

Don't ask me why I bought a Lexmark. I had a weak moment. Have had nothing but trouble. Today I received a remanufactured color cartridge from a company I've relied on for years and the color cartridge prints nothing. But when I run a "clean nozzle" it shows it is full of color ink. Could there...

I'm using a Canon MPC 190, and since I get this warning "Black ink level low", the draft and normal printing mode is not working at all (only black ink). At the begining I believed it was because of the lack of ink.... but I turned the priting mode to "Photo pro", and then I've been able to print...

I nedd exploded view of this laser printer. Can you help me? Thanks -- Posted via Mailgate.ORG Server - http://www.Mailgate.ORG

I nedd exploded view of this laser printer. Can you help me? Thanks -- Posted via Mailgate.ORG Server - http://www.Mailgate.ORG

I rarely use the color inkjets. Today I printed out 200 pages in black and white. When it was finished, all three color ink cartridges showed they were almost empty. I don't get it. Any thoughts would be appreciated. Pat

This seems to be the best newsgroup for my question: I've got a Xerox solid ink printer and if I try and laminate any output the heat from the laminator makes the ink run a bit, anyone got a solution? Thanks. --

Hi all, I was wondering if someone can tell me how to disable the hardware from checking whether or not there is a color cartridge installed. I dont want to install one anyway, but more importantly, the contacts to the color cartridge are broken. Is there a way of telling the printer not to check...

Hi all, I was wondering if someone can tell me how to disable the hardware from checking whether or not there is a color cartridge installed. I dont want to install one anyway, but more importantly, the contacts to the color cartridge are broken. Is there a way of telling the printer not to check...

The X74 MFD has "black copy" button that makes a copy of the document without using the computer (it has to be powered on, because it has to process the scan and send it to the printer). The default setting for b&w copying is something like 300dpi scan, 600dpi print. I want to change it to 150dpi...

The X74 MFD has "black copy" button that makes a copy of the document without using the computer (it has to be powered on, because it has to process the scan and send it to the printer). The default setting for b&w copying is something like 300dpi scan, 600dpi print. I want to change it to 150dpi...

I am the lucky owner of two Macs, an Imac 600Mhz (system10.2) and an old 8100PPC (system 8.6) I was recently given an old LW select 300 I had minor problems putting the printer shared through the Ethernet network between the the 2 computers But i have a BIG problem of paper jamming, the printer...

I am the lucky owner of two Macs, an Imac 600Mhz (system10.2) and an old 8100PPC (system 8.6) I was recently given an old LW select 300 I had minor problems putting the printer shared through the Ethernet network between the the 2 computers But i have a BIG problem of paper jamming, the printer...

I want to write a low level graphics driver (non Windows) for these printers. Anyone know where I can find documentation on the control codes etc. Canon Technical support were more than a little unhelpful. Jack Russell