Here are my specs Ic7-G bios 1.4 P4 2.6C 800Mhz FSB 2 - Corsair PC3700 512MB TwinX 2 - Western Digital Raptors 36G in Raid 0/Intel ICH5 ATI 9700Pro 128 MB or Gforce3 Ti200 64MB Antec True Power 380 or 480 ( tried both )

Hi All Any suggestions on the following little problem. Providing I don't power off the system everything is OK. If I power off the system I lose the 2 hard drives connected to the RAID IDE3 and 4 slots. I'm not using them for RAID, simply as additional drive space. If I simply restart the...

Ever since the 2 latest bioses (dated 10th June and 2nd July) I have had a problem with the bios not detecting my Primary IDE device on IDE1 on a cold boot. After a warm restart they appear as normal, but then Windows does not see the Primary device on IDE2. On a cold start it sees IDE2 but not...

I'm in need of a little help here people. I have a p4 2.4 hooked into my board and it all runs ok until I start to play games, after a while the machine will suddenly without any warnings shutdown. After it has done that I have to leave the machine for about 30mins or clear the cmos before it will...

I'm ready to buy the chip above from NewEgg, having read the group the success of this chip with my board. KT7-Raid. I have latest bios and I am running Windows 2K SP4. Here's the question. At NewEgg site, they list two products under the 2100+. One is an OEM product for $69 bucks and is...

Set the hard drive to Master Patrick "leia176" wrote in message ... Hello! I've tried hooking up a regular hard drive with the SATA converter supplied with the motherboard. It just is not recognized. Nothing for the SATA

I've just recently purchased an Abit IS7. Upon assembling it, it worked fine with my SCSI card, an Adaptec 29160. Of course, a lot of other things didn't work (such as Windows installation on my SATA drives). That being said, I found out that updating my BIOS to 1.4 would solve this and...

I have a BE6-II v1.2 that I upgraded to a v2.0 with the 2.0.1024 oem BIOS and drivers. What BIOS and driver version is required to recognize a 200 gig hard drive? I've already obtained some of the custom files from Mr. Geery's ftp site but do not no which version to use. Anyone? Thanks in...

God, is there anyway to rid the board of this spamming?

Anybody know what the frequency settings are for a 2.4 cpu with this mobo? Abit's documentation is very vague as to the specific settings for this cpu. Thanks

See my web page... Forrest Motherboard Help By HAL web site: http://home.attbi.com/~hal-9000/ On Fri, 18 Jul 2003 18:42:52 -0500, "an" wrote:

Hi, I dont know if anyone else has faced this problem before. I got a Abit BH7 and its been running smooth for 2 months. Yesterday, all of a sudden, I heard a loud 'crack' from inside the case, and the screen went blank. I turned the power off almost immediately (1-2 secs). Upon looking in, I...

I recently bought a KD7, and I'm having a few problems with it. I hope you can please help me with them. According to the BIOS screen, the board model I have is KT400-8235-6A6LYA1AC-DN. I have an Athlon XP 2800+ (barton core, 333mhz fsb) with 1 GIG of PC2700 DDR. The board has AwardBIOS. The...

Hi, I've had the IT7-MAX2 v2.0 for about 9 months now and have updated to the newest BIOS and newest sound drivers but I'm still met with the same issue I've had pretty much had from day one. When windows plays a sound it seems to clip off the first few milliseconds of the sound to where it is...

Hi, Just bought a new computer with a KD7 motherboard. It seems to work quite good, but there are a few problems: snip Any clues?

As I understand the manual when I load the drivers I am meant to get an additional icon in my control panel for sound. I have loaded my unified driver ver 2.41 from the Nvidia website and alas no icon. I then loaded the drivers from the cd as advised by my motherboard supplier which I have done and...

Just bought an NF7-M board. Looking at the instruction manual, it seems that there is only one audio connection on the motherboard to connect an optical device. I plan on putting in separate CD-RW and DVD drives (salvage from another system). Is there any way to hook both up so that sound can...

Hi, Just got back from vacation and went to boot up an old machine with a BE6-II mother board. First it made an alarm sound. I checked to make sure the voltage wasn't set to 200 and it wasn't. I tried removing the RAM and that had no affect. I finally ended up fiddling with the ribbon cable to the...

By default the correct FSB will be set by the bios Patrick "TG" wrote in message ... So I finally got the hotsie-totsie board to load and be stable, but how do I take advantage of the 800MHz FSB I paid extra for? I don't...

In article , (Peter Sørensen) wrote: I've just purcased a nf7-s motherborad, when i boot the pc the only thing that happens is that the speaker beeps every 2-3 second Tried holding "insert" down during reboot? That usually forces it...