New A7N8X Deluxe hangs at post: "WARNING!! CPU HAVE BEEN CHANGED" Replaced an A7m266 that was running fine for about 3 1/2 years. Have the XP2100 CPU, 400 Watt power supply Antec, 512 ram pc2100. pressing DEL will not even let me update/enter the bios setup. help?!?

We know it sounds TOO good to BE true, but it's REAL! Our International Technology firm will pay you hard cash each time FREE software is downloaded. Best of all you will only have to download ONE piece of software ONE time for FREE and you can be on your way to earning BIG! FIND OUT MORE BY...

Also, shows to be in mode 5 in system files, not pio. "ct" wrote in message ... I changed out the a7n8x to new ver 2 and xp2500 cpu win xp. Reused wdc 80 gig hard drive. I was running around 30000 on Sandra,...

I have the ASUS p4b-266 and wwhen I put (1) 512m and (2)256m dimms all of the same brand, my motherboard beeps. When I take one 256m dimm out, it boots fine with 768m of ram. I know the ram is good because I tried swapping the 256m dimms. Anyone have any ideas?

Officially Asus publications mention the Athlon XP 2100+ (Model 6 Palomino) is the fastest Athlon on an A7V133 rev. 1.05. (note the extra dot) with Bios version 1007. All lower versions are limited to the Athlon 1400 (266MHz FSB). See: http://www.asus.com.tw/support/cpusupport/cpusupport.aspx I'm...

I have purchased the Asus P4C800 Deluxe Motherboard and I have not been about to get my mind around the setting up of the IDE ports. I am guessing that the IDE ports are ready to use by default but I am not sure. All that I want to do at this time is to connect my 2 hard drives and 2 CR-Rom drives...

I've been using my P4PE without problems for about 6 months now. I ordered a new SATA drive that just came in today and I'm having a lot of problems installing XP onto it. I have a few questions and observations for those that are successfully using this combination. I setup my system with just...

Finally deciding to upgrade my motherboard/processor. Always had Asus,... currently have a P2B-F. So my question is, are all procs pretty much Socket 478 now, from intel? I'm just wanting to make sure what I have.. my brain is stuck 3 years ago when Xeon's were way different than regular pentiums,...

I had a similar problem a little while ok, but it was the power light that kept flashing, what it turned out to be was that i had put the pc into sleep mode and when i brought it back out the light kept flashing turning the PC off didn't solve it, the only way i managed to sort it out was to unplug...

Looking for some advice and insight. I put together a brand new system built with the following components: Intel P4 2.8C GHZ 800FSB CPU ASUS P4C800-E MB (came from the factory with the latest 1009 bios) The CPU was a retail box kit which included a stock fan. I assembled the system and it...

Just run the install executable again. There should be a choice to "uninstall". "Todd Clayton" wrote in message ... Morning people. Is there any way to uninstall the SIS chipset drivers for my A7S333? I'm ...

havinb problems with my good old p2b-s board running fine, but wonna plug in an pci-firewire (digitus connect) having the newst bios update but as soon as i plug it in and restart, the good thing crashes. running under w2kserver

i just bought an asus p4sdx mobo, 2.4ghz intel celiron chip, western digital 160gb hd, 52x24x52 cdrw, 16x dvd, 1 dimm k byte 512 ddr333 pc2700 memory, asylum gforce fx 5200 128mb video card (8x agp), and put it all together. However, after putting it all together, the computer turns on, but...

Hello, I've a Asus P4B266-SE with a celeron 2 ghz. I'd like to buy a Pentium IV 2.4 B but on Asus page, I saw I could only put a cpu with FSB 400 ! In the bios, it's possible to put 100 to 200 Mhz. Do you think It will be possible with option " User define " ??? Thanks. François.

What the fan work (or not work) with the Q-Fan ?

I recently started to build a PC using the A7N266-VM as the basis, it's only cheap system for a mate. Anyway I've got a problem, I get a long intermittent beep when I turn the base unit on. I had a look for the beep codes on the ASUS site but the knowledge base seems pretty poor. So has anybody...

I have the following: Antec Sonata case w/ 380W PS P4P800 Deluxe running Bios 1008 (30% overclock) P4 2.4GHz 800 FSB CPU (running at 3.12GHz) WD Raptor S-ATA 36GB HD ATI 9500 PRO 2 x 256MB OCZ PC3200 (400MHz) dual channel (512MB total) Leadtek TV 2000 XP TV Tuner

"John Q. Public" wrote in message ... both CDR and DVDR are flagged in device manager. I tried unplugging/replugging cables at all ends (incl the board) starting WinXP with them unplugged, then starting with them replugged,...

Hello, I've been fighting with a difficult to pinpoint stability problem for several months, and it's gotten worse recently. Here's the story: A few months ago, I bought the following config: - AMD XP 2000+ , Thermaltake fan - A7N8X Deluxe, 1002 bios or so - cheap PC2700 RAM

Upgraded to BIOS 1013.001 and it works perfectly!!! "Phu" wrote in message ... I have the following: A7V8X-SATARAID version Using the onboard Promise 20376 SATA raid 1 for 2 x 80GB (OS) Promise SX4000 RAID 5...