hi all, i'm wondering whether mobo 8knxp rev 2 supports p4 3.4C or not. if not, does it support 3.2C? how to know which is the maximum freq it supports? many thanks domenico -----http://people.debian.org/~cavok/gpgkey.asc ---[ 3A0F 2F80 F79C 678A 8936 4FEE 0677 9033 A20E BC50

I have just installed this board and now I'm thinking of upgrading my processor to one of those new Prescott ones. What I wanted to know is does this board have a limit as to how fast the processor can be? Cheers. Si

I have two 120gb Seagates running off the SIL controller but would like to use 5ICHR SATA controller. I also have a DVD/R/RW, a DVD ROM and a CDR/RW connected to the IDE ports. I am not running any raid configuration but somehow feel that if I'm not connected to the Intel sata ports I'm somehow...

Hi all, Are there any 8knxp rev2 owners out there using socket 478 Prescott cpu's? Can the board handle/deliver the extra heat/voltage OK, or do they give up the ghost after a short while. Thanks in advance, -rhogue

After installing SP-2 on my Rev 0 board (bios F6) the thing won't powerdown. WinXP shuts down okay, then the computer hangs at a black screen and will not power down...the power supply keeps running. The problem is due to Adv Config Power Interface (ACPI) not being loaded by default (and I don't...

I just installed a Zalman CNPS7000-Cu yesterday. The good news is that it is very quiet and cools well even in silent mode. The bad news is that it did not fit my mobo with DPS2 installed, despite indications from others that it would fit. I'd say it needs to be at least 1/8" smaller in...

On intensive CPU load / graphical load a constant beeping noise is heard through the computer internal speaker. On closer inspection and running tests it appers that the -12v is only reading -9.7v and the -5v is reading -4.7v. The computer continues to operate normally with no other problems but is...

the bios of my rev.1.0 8knxp shows that the 5 volts has failed but the system seems to be running just fine. i did not oc anything just running standard it hang when i was using my pinnacle pctv pro for a while, i did a reboot and all was running fine but stil the bios said that the 5v has failed,i...

I am trying to get to the bios screen to change the settings there however when I press del on setup... when your supposed to, my system hangs with a flashing cursor in the top left of the screen. I have tryed several different bios versions, currently im using v. F9 (first revision board) but...

I have revision 2.1 of this motherboard, everything seems ok and working....yet on a cold boot up i get BIOS beeps. The manual is no real help but i get alot of beeps that are not consistent with what the manual states. I have tried adjust voltage and memory timings to see if it's a RAM issue, but...

I have updated my MAIN BIOS to version F6 using QFlash. Before doing so, I have copied the F5 BIOS to the BACKUP BIOS. Now, under Windows XP, I see with "Gigabyte @BIOS Writer": Intel i875P AGPSet BIOS for 8KNXP F6 AWARD BIOS Fine ;-) But the "DMI Information tool" displays F5 as BIOS...

I've flashed the BIOS with F6f version wich activate Raid function with SCSI, and now, I have no access to dual Bios : pressing F8 in setup brings me to black screen an floppy light on... Is there anyone with the same problem ?

My CDROM and DVD burner are set at PIO mode in the IDE/ATA controller. If I change them, I can only get "Multi-Word DMA Mode 2" Then they seem to be unstable at that setting. What does that setting mean? I have never seen it before. On my older computer, I had them set at UDMA. Why can't I get them...

Quite often when I return to my PC after it has been in standby mode I find that it is emitting a steady tone through the PC speaker. Moving the mouse or touching a key brings the system back to life and the tone stops. I tried disabling the fan speed and CPU temperature warnings in the BIOS "PC...

The new f10 bios for the 8KNXP refers to updating the "micro code" as the only enhancement. Does anyone know what this entails and if it is worth an upgrade from f9? -- To reply, nix "nix" in address.

Hello; I have a 8KNXP that is 1 1/2 years old and it appears that my USB prots are not 2.0. I assume this means I need a BIOS upgrade (I have version F5). I have a SATA mirrored SIL set. When I check the BIOS updates it says; ----------- Note! If your OS (like WinXP) is already installed on SATA...

Any way to tell how fast or you can push this baby. I have the it 3.4 gig and it appears to be rock solid. CPU with non stoick fan keeps it at 37 to 54 deg C. My concern is the mainbpard controller chip, it has a fan on it but since I can not monitor the heat on that chip I am not sure if I...

I'd like to be able to use a single HDD on IDE 3. There must be some simple step that I'm missing because whenever I connect to IDE 3 the PC will not boot, it hangs at NTLDR not found. Since a single drive didn't work I tried 2 HDD on IDE 3, master/slave, and two Raid options were...

In its default jumpered (2 jumpers) configuration, I found that sound output at the rear was mono, the second channel was silent. I took the jumpers out and attached the wires from the front panel sound jack to the MB sound pins , and I got two channel normal output. Has anyone had this type of...

Earlier today I decided to do a comparison of the ITE Gigaraid IDE chipset vs a standard Promise UltraTX2 IDE PCI adapter. I did this after I read a few comments over the past few months that suggest the ITE Gigaraid chipset is very subpar. All of my tests were ran on a clean fresh Windows 2000...