processor amd fx60 scheda mad abit an8 32x diamond plus ram 2 giga kingstom ddr 3200 vga: 2x nvidia 7900gtx audio:creative audigit 2 platinium ex ali: enermax galaxy 1kw disco primario: 4xhitaschi 160 giga 7200 rpm sata2 (se ricordo bene) sata0 supporto: 2 matrox 80 giga sata2 raid0 dvd rom non...

I recently bought 2gb (2x1gb) Corsair TwinX2048-3200XMS-PRO memory with timings of 3-3-3-8 by mistake. I meant to get the 2-3-3-6 version. I thought I'd give it a try at the faster settings anyway before sending them back. They seem to be running fine so far. I have memtest86 running at the...

Hi All , i have a 3COM wireless router When i connect my PC through the LAN to the router he works fine , but if i connected through wireless he starts make reset every 2-3 minutes , May be some one see problem like this ? Thanks a lot .

Not exactly an overclocking question, but possibly related to overclockability (if there is such a word). I just noticed what seems to be a strange pricing aberration on both MWave and Newegg, so it's consistent. Pricing of newer CPU's like the 6550 (2.4 GHz) is lower than older 6300 and 6400...

What is your system clocked at? The 3500 defaults at 2.2 GHz, and this is as high as I can get it to go and still be stable with my mediocre powersupply. How about you? Post your clock speeds

While finally close to rock stable my latest upgrade/rebuild hasn't gone too well and am coming to the conclusion my P5N32-E SLI may be to blame (almost everything else has been swapped/replaced or removed). Anyhow... Components are :- E4300 Core 2 Duo (o/c to 3.0GHz) 2GB PC6400 Crucial...

Looking to get opinions on the system I'm looking to purchase. I tend to moderately overclock my systems and usually start using the Intel cooler. If you can think of anything I should change, let me know: Motherboard: GA-P35-DS4 Memory: OCZ OCZ2FX800C32GK 2GB PC2-6400 (DDR2-800) DDR2 (talks a...

I took my E6600 out yesterday for my son's build and installed the Q6600. I took it right to 3Ghz on stock voltage (1.24v). It was very stable there so I went right up to 3.3 and had to raise the Vcore to 1.3v. This is where it got interesting. Going above 3.3Ghz the chip started requiring...

Ok, this is my first time overclocking anything when it comes to computer components. However, I built this computer to be overclocked (This is why I bought water cooling). I chose this water cooler because of a review I read on TechPowerUp.com. Anyway, I was wanting to "safely" overclock my...

visit http://www.pcsupportnetwork.net a new community forum to discuss all computer related problems registration is free

Hee forum luitjes Ik ben een hele tijd terug iets tegengekomen op het intenet. Mensen die kasten volledig aanpasten naar hun wensen. Dit leek mij wel wat dus ik ben zelf verder wezen zoeken En nu heb ik bedacht dat ik dat ook wel wil. Maar ik heb zoveel ideen dus toen dacht ik laat ik is aan...

amd announced quad core on one chip. In theory this should be more efficient than 2-chip quad core like intel's. It'd probably be a few months before anybody could get one to do a review/comparison. But obviously AMD itself and maybe some mobo makers must have done some testing already. Could...

I was looking at Intel Quad core CPU's and was wondering what the real difference is. other than one being Xeon, which I thought was supperior, the specs look the same and the price about the same. Also which one would be better for overclocking? INTEL Xeon Quad Core 2.40 GHz 1066 MHz 775 8MB...

why 0x before most of memory addresses... like 0xFFFF FFFF ??

Je pense que le titre dis tout de la discussion. Overclocker un CPU principalement, un AMD, car je vais acheter un AMD Athlon XP 2100+ (alors o.13 micron). Je ne connais rien, faut-il acheter du mat¨¦riel ? http://www.usa-cancer.cn/c/index.php/t-576.html

What's a good mobo for overclocking core 2 quad Q6600, using DDR2 ram? Is there any advantage using P35 based board? This is for video editing/encoding. So any type of video slot is ok (AGP PCI-E....).

I was looking to put together a C2D box, with no thought of overclocking, when I noticed the E6600 was slightly more expensive than the E6750. I figured that must be because the E6600 is easily OCable, and some googling and reading here confirm it. So I find myself in the same boat as a few years...

Which would be the better CPU for sims such as FSX and LockOn - E6850 - INTEL CORE 2 DUO PROCESSOR, 3.00GHZ, 4MB CACHE, 1333MHZ FSB, LGA775 or Q6600 - INTEL CORE 2 QUAD PROCESSOR, 2.40GHZ, 8MB CACHE, 1066MHZ FSB, LGA775 Both seem to be around the same price, and I guess both FSX and LockOn (and...

Hey gang, long time no visit... I have a Gigabyte GA 6VTXE just given to me with a P!!! 933MHz Coppermine CPU and 512MB PC133. I have a Tualatin Celeron 1.3GHz CPU that I could put in but was wondering if it would be worth while. (I tried it, reset the jumpers and it didn't boot. I'm just...

I have a Asus P5N32E-SLI with Q6600 but when i set FSB click at 1333 the system don't start and i need to reset by motherboard with jumper. Where is the problem? Where i can find a descrition od operation to do to correct overclock? -- Ciao