|
|
Presario 7000US problem by
Joe Tank
Just got a used Presario 7000US that will not boot up.
Most of the time when I press the power switch, nothing happens.
Sometimes, I hear the fans start for a few seconds, then stop again.
I tested the power supply with another motherboard and it worked fine.
I also replaced the power switch with...
|
|
0 |
596 |
|
|
Proliant 1600 SCSI by
Joe Terry
I have a proliant 1600 that runs NT 4.0. The system crashed last week and I
need to replace some system files on the SCSI boot disk. I can not find the
SCSI drives when I boot from a Windows 2000 install disk to use the recovery
console. Does anyone have any ideas?
Thanks in advance.
|
|
3 |
333 |
|
|
146.8 GB drive in a RA4100 by
Joe Wells
Hello, all.
Has any here tried to use 146.8GB drives in a RA4100? I know 72.8GB is
supported, but hp doesn't want to give a straight answer about 146GB.
Thanks,
Joe Wells
|
|
0 |
621 |
|
|
P800 /14 problems by
Joep
Hello newsgroup,
I'm the (proud) owner of a P800 (2x Pii350 512 Mb mem.) W2K operating
system. The thing is working for years and... no problems.
What is the joke now I did extend the SCSI drives to 6x 18 Gig 15000 RPM
but more space is wanted:-)
So I bought myself a SATA Raid card and 2 drives,...
|
August 26th 05 10:49 PM
by Joep
|
4 |
243 |
|
|
Proliant 800 P14 question by
Joep
Hey,
The bios battery of my server is empty
the motherboard has a connection for a
extern battery.
Does annybody know wich of the pins is the + and wich is the -
of the tree pins?
the pins are in this way;
|
|
4 |
424 |
|
|
DLT internal tape in DL530 by
John
Although this is really a Storageworks tape drive problem, I can't find a
better group, so:
We have a Proliant dl530 running win2k advanced server. We also have an
internal storageworks 20/40 gig DLT tape drive, which we had installed at
the factory (3 years ago).
When I went to change the tape...
|
|
4 |
250 |
|
|
ML330 (1ghz) not seeing IDE hard drive by
John
I am not able to get my Compaq ML330 (1ghz) to see any IDE hard drives on
either controllers...
I've heard Compaq servers do not support IDE hard drives ... Is this true
???
John
|
|
1 |
413 |
|
|
|
August 1st 04 05:03 AM
by Larry
|
1 |
354 |
|
|
Proliant 1600r - Additional CPU by
John
I have (2) Proliant 1600r's. The one with a single processor is in use, and
the one with dual processors has been retired. To add a second processor to
the one that only has 1, is it as simple as unplugging it from the slot on
the main board in the 2nd server and plugging it into the first? Or is...
|
|
1 |
350 |
|
|
MS Dos driver for smart array by
John
Hi,
Where can I download Compaq smart array 5i raid controller MS DOS Driver?
I'm trying to make a Ghost image of windows 2003 server installed on my
compaq DL380 G2 Server but I can't find a MS Dos driver for Smart array 5i
controller. Any help would appreciated. Thank you
|
|
3 |
247 |
|
|
Change/Reset Insight Mgr Passwords by
John
Hi,
I have a 1/2 dozen Compaq servers (DL360's/DL380's) and I'm trying to access
either the system manager or raid configuration manager, but no one
documented the passwords for the administrator/operator/user accounts. I can
bring up the web page, but then I'm stuck. Is there a way to reset...
|
February 12th 04 07:11 PM
by John
|
0 |
548 |
|
|
Proliant 1600R by
John
Has anyone tried to upgrade a Proliant 1600R from Windows 2000 Server to
Windows Server 2003? Officially it's not supported.
Thanks.
John
|
|
1 |
343 |
|
|
Proliant 2500 CPU Upgrade? by
John Dean
Is there a way...??
I have a Proliant 2500 Tower Case Model with the CPU/Memory module for two
Slot 1 Pentium II 333MHz CPUs. It also has 1.5GB of memory and a five drive
RAID and a two drive mirror. It all works fine under Win2K Server. (I
Think I would like to make a Linux Server out of it,...
( 1 2)
|
|
13 |
1,242 |
|
|
|
|
7 |
610 |
|
|
Proliant 6000 and SmartArry 3200 by
Johny Cage
I have to configure RAID on Proliant 6000 Xeon box.
The RAID card that was pitched in Proliant 6000 documentation is 3100ES
which uses the built in 3 channels raid in that server.
Right now I have SmartArray 3200. I want to know if that is compatible with
the Proliant 6000.
The issue I am running...
|
|
2 |
584 |
|
|
orange LED on dl360 system board by
jon akeson
Hi. We just replaced a system board on a proliant dl360 g1, it will
not power up and there is an orange LED lit on the System Board --
what does this usually mean?
|
November 6th 03 09:39 PM
by Sharmon
|
1 |
429 |
|
|
ML330 IDE Drive probs. by
Jon C
Hi there,
I've just recently invested in a Compaq ML330 server to play with in the
hope of teaching myself a little bit of new technology.
OK, I have Red Hat Linux 7.3 installed and the system has the standard 18gig
SCSI hard drive. But I would like to install Win98 on a seperate 10gig IDE
drive...
|
February 28th 05 10:03 PM
by Jon C
|
1 |
150 |
|
|
RAID array online expansion ? by
jon place
Smart Array 431 Controller, 5 x 18gb disks (RAID 5), Windows 2000, no more
free drive bays in chassis :(
We are out of disk space.
Plan - can we replace the 5 x 18gb disks with 5 x 73gb disks, one at a time,
rebuilding the array (along the way) onto the bigger disks. Once complete
we will have a...
|
|
3 |
181 |
|
|
|
|
3 |
579 |
|
|
Proliant 1600: Changing Power Supply by
Jonathan Preston
I have a Proliant 1600 and need to fit a quiet power supply as it will
be used in a small office. Is there a way of fitting a standard power
supply to this type of machine?
|
|
1 |
395 |