Hi All, This XPC box had the same problem with SuSE, that it crashed about once a day and constantly rebooted itself until I tilted the box on its left edge about 70 degree counterclockwise and held it there about 30 seconds. The box was then able to post and reboot back to normal as if nothing had...

saw this board and immediately thought cheap AMD 64 system thing is i knwo it has 2 SATA connectors but no mntion of RAID anywhere that i can fid

Hello, Can I use this processor (P3M): 1.13ghz Bus Speed: 133mhz L2 cache size:512kb

Have a Western Digital that stopped booting. It hangs at the Windows XP spash screen, with the scroll bar running beneath it. When trying to boot to safe mode, it hangs as it's loading .sys files from the drivers folder (last one listed is amdagp.sys). I can see it in the bios, and I've run a WD...

Hi all, I have already made the purchase a month ago and now I realized that I didn't pay attention or gave enough importance to the amount of L2 cache memory included in my Dual Xeon system. I just wanted to have as much Ghz as possible ... The question is, is it better/faster: - Dual Xeon...

Hi I've got a problem with a card a mate gave me. I can't seem to get any 3D from it. I'm running a P3 800mhz with 512MB RAM and a Hercules 3D Prophet 4000XT PCi 64MB card. When I run DXdiag (V.9c) and do the Direct 3D test, the screen goes all weird and I have to "escape" out of it. I'm fairly...

I recently had a new computer built including a Samsung 52x32x52 CD-R/RW drive and with Win 2000 Pro as the OS. I've noticed that on more than one occasion the drive will not mechanically open unless I reboot the system, seemingly as if some system resource pool needs to be refreshed to allow...

Hi all I have an upgraded my system, having changed my M/board and re-installed XP. I has occurred to me since then, that my 100Gb IDE drive 'should' have been changed at the same time. Do I have to re-install XP all over again or can I tranfer my system to a new drive but using the on-board SATA...

We've got an aging PIII 800-Mhz system running WinXP Home, with 20-Gb and 6-Gb HDD's (FAT32); the system boots on the 20-Gb drive. Initially, I figured to simply replace the 6-Gb drive (it's older, installed in 1999) to get more storage capacity, so off I went to the local CompUSA -- haven't yet...

Hi Everybody, I have recently built a new computer. I installed along with it a 420watt Enermax Power supply. It's great, but I have one complaint about it. It really gives out a bad "hot smell". I figured out, that the case was designed for a PII not a P4 3.0GHz. As the CPU was running around...

Can someone help, I have mislaid the power supply unit for my NEWLink 4Port USB2 Hub model NET4006. Can some please tell me the current/voltage specification needed. Thanks, Tony. --------------= Posted using GrabIt =---------------- ------= Binary Usenet downloading made easy =--------- -= ...

"Franklin" wrote in message ... This is off-topic. Which is french for "the OP is an idiot"

Hi all..just did a fresh install of xp on my old machine. I can't find any via 4-1 drivers for xp for the board. any suggestions. DC

No problems till now. After copying file to CDR, computer wouldn't recognize disk in that drive, but would see file in DVD ROM Drive. Attempted re-booting to clear problem, now power to fans but no beeps, no boot activity, no image on monitor. Won't boot from floppy either. CMOS Battery or Power...

Running W2K. Can copy files to my external harddrives (new high speed IDE drives), both USB 2.0 and Firewire 1394a, at approximately 1 GB per min. This seems very slow to me, and does not begin to approach the rated speeds of either USB 2.0 or Firewire. Comments/Recommendations?

Hi I suddenly had a "mouse freeze" on me. The whole PC locked up and I rebooted, to Nothing! I have a 8m old p4 3.2 with 512MB Ram, Win Xp Home SP2, 200MB MAXTOR (Yes Maxtor..I know what you're thinking) Hard Drive that has been making a Grating sound for about a week. It's a Diamond Plus 9, SATA...

Dunno if this is *quite* the right newsgroup, but this seems like something people here would know. I'm going to add a new hard drive to my system. It will be a 7200RPM PATA 133 drive with an 8MB buffer. My current drive is a 7200RPM PATA 100 drive with a 2MB buffer. Would it be better to put...

Do you have 2, 3 or 4 computers and just want one set of speakers? I had this problem and used this very inexpensive mixing board. I don't need it anymore, so I'm selling it on eBay. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=7303671313&ssPageName=STRK:MESE:IT The board saw light...

I've got a fresh installation of XP, and randomly (without doing anything) it will crash. I have a brand new system with all new parts: - Asus A7N8X-E Deluxe. - SATA hard drive. - Kingston memory. - Seagate hard drive. - AMD 3200 Athlon Barton CPU

I have an AMD 2,6ghz 1 gig ram 2 x 120gb IBM set as master, 200gb maxtor set as slave LG DVD-RW GSA-4120 400w power supply MSI motherboard System was working fine, detached the 200gb hard drive, to take it with me on vacation...now when i try to reattach it system boots up..then