Just put a Sata drive in (VAXP-A Ultra), ME installed but XP doesn't find drive as an install option and no option in bios to set Sata drive as boot option Any ideas Grahame

Ummm, I suspect that this question has been asked a gazillion times before but I could not find it mentioned in this group so here goes.... I would appreciate some suggestions on what brands of 512meg memory to use in a Giga-Byte GA7-NNXP mobo? I am planning to do some over clocking so I guess it...

Hi, I have just purchase this board. I would like to overclock my 2.4Ghz Intel processor to 2.8Ghz. How do I do it?. I have tried easy tune but it does not retain the settings I save. Also I would be very grateful if someone could give me the best settings for this processor.My processor details...

I have 512 megs of pc3500 samsung ddr memory that's about a year old in my ga-8iexp mb. I want to add 1 gig more. Does anyone know if 2x256 dual channel memory is compatable? Thanks

Hi everyone! I have a Gigabyte KNXP with 2 Western Digital WD800JB harddisks attached to IDE3 and IDE4 (IT8212 raid) ports. I tested the read/write performance on my winXP system using ATTO Disk Benchmark. The result was a read throughput of max. 58MB and a write throughput of 75MB!!!!!!!!!!

Does anyone have +5v probs with 8knxp rev. 1.0 bios F6. Tried just about everything possible but instability remains. Giga-byte support sucks here in holland! I didn`t OC the board,just running standard does anyone have the same problem?? Voltage goes from 1.7volts to 6.8volts but never the right...

I noticed that my system clock was reported as 1742 instead of the 1733 it should be. I decided to see if maybe I had inadvertently selected top performance. I looked and top performance was off so I decided to turn it on to see if it would change anything. It did. So I turned off by loading...

Any ideas on what can be causing the system to hang? Hardware or software? Bill

I tried downloading the drivers from GB's site and from my but under WIndows 2000 Pro in Device Manager it still has the yellow exclemation saying the driver isn't installed. During the driver Install it looks for but can't find iusbehci.sys. It is in the 9X and ME folders but not the 2k or XP...

Anyone have a clue as to what the C.I.A. setting is in the Rev 2 BIOS? Default shows +3% MHz, and it can be set from -5% to +20%. It's not mentioned in the users manual.

Hi, just wanted to know whether the latest Intel P4 800FSB Hyper Threading CPU, could it be used on a Gigabyte 8IHXP motherboard running RamBus Ram. Any advice is much appreciated and many thanks in advance. Anthony

Hi, I have a very strange problem with the GA-7VAXP mainboard. It always worked perfectly with Windows 2000 and an Athlon 2000+. However, I upgraded the processor to an Athlon 2500+ (333MHZ FSB) and windows won't start anymore. Safemode hangs on mup.sys. I even can't install W2000 any more, I...

Hi all. We have a GA-7DXR motherboard with an AMD Athlon 1800 CPU, an Audigy 2 Platinum sound card and an Nvidia OR Voodoo 5 graphics card (we have tried using both alternately). Until recently this system worked fine. Then we upgraded the hard disk from 80GB to 120GB and everything now goes poear...

Actually, it did not die but is badly crippled. It worked fine for 30 days with Athlon XP 1800+ and 2x512MB DDR400 (Corsair Value Select). I ran the memory at 266MHz. Last Sunday while working with Windows XP I suddenly got BSOD, and since then the only way I could get the computer to work was...

I am having some trouble figuring out how to make some of the pin power connections to the Gigabyte 8KNXP motherboard. For starters, the motherboard manuals show the connections by individual pins while the connectors from the case are grouped (ie, if there is are say 2 pins to a certain connector...

I can't get my GA-7ZXE to go into any kind of standby mode. It is running WinME. I have a GA-7VAC and that goes to sleep quite happily also with WinME. I have tried various combinations of BIOS settings to no avail - quite honestly it is one section of the BIOS I do not really understand. If...

I just installed a K8NNXP board. This is my first experience with Gigabyte. I am running WinXP pro. The computer will not shut off. When I select "shut down computer" The pc will shut down momentarily then REBOOT. I have upgraded to the latest BIOS but it has not made any difference. Has...

I have an Intel P4 2.53GHz CPU currently @ 3.07GHz. The FSB is currently set at 162 and DDR322MHz. But when i try to bump it up to a FSB of 166MHz it totally locks up and won't boot, have to turn off the power...any ideas or have i reached the limit of a stable system?

Hy Folks, Boot system fail when i let a USB HDD (Handy drive TOSHIBA) pluged on the 8KNXP MB just after select a OS in the Black Boot Screen. I receive the following error message: "Windows could not start because the following file is missing or corrupt: Windows\System32\Hal.dll" I have Dual Boot...

Does anybody know if the GA-8IHXP motherboard will take say, a 180GB hard disc?