Time to build a better computer than my old one.... Woudl appreciate any recomendations for MB/CPU/and memroy. My requirements: 1. Reliability 2. Cost 3. As many USB 2.0 (or better...?) as available 4. Highest speed processors but no overclocking

Just to report (because I am pleased) that I replaced half a dozen bulging capacitors on my 1999 BF6 yesterday and it appears to be working fine. Just as well I had upgraded to broadband in the year I have been without it as there was over 30Mb of Windows updates to install. So now I have a...

This is a great motherboard! Now at 1.4 ghz with PowerLeap! Anyone else have this combo? Hopeufully it won't fry my caps!! laters, Raul

I got a bh6 mainboard with SS bios. I also got an upgradeware slot-t adapter. I was given a pentium 3 1100mhz, 100mhz fsb, cpu. I can't get this to work. When I boot up I simply get a blank screen. Has anyone else got this to work? If so do you have any clues what I'm doing wrong? Jumpers...

Hi all, I have an ABIT BH6 that had bios rev. KK. I have to update the bios to get it to work with my new large harddrive. The HD is working fine now. I went into CPU SOFT MENU II and changed the settings to 133 FSB, but now when it boots up, all I get is 950mhz (instead of 1066 mhz). CPU ID in...

Hi, I bought a Kingston 256 Mb Ram (133) but my BH6 only counts up to 128. Any Ideas? Thanks Jan

An old trusty friend looking at her last upgrade =) Can anyone tell me if a new Celeron 1.4 FC-PGA2 will work in the current Abit Slocket adapter? Has anyone tried it? Currently running a 1.0 ghz Celeron but I don't know if it's the A package or not. Gary

thanks in advance for help and suggestions :-) a local small charity has had some parts donated included in these are several BH6 motherboards so, I've managed to work out that the BH6 can take AGP 2x graphics 133MHz SD-RAM and the CPU is obviously Slot 1

anyone got wake on lan to work on a bh6? using a bh6 board and dlink dfe-530tx. bios enabled, but when i connect the wol cable onto the motherboard, the link light doesn't come on on the nic.

To the guy that asked about using a Celly 1.4: Use the Slot-T adapter.

This is the second time I have lost a motherboard when flashing a BH6 motherboard (the only 2 times I have had failures). Anyone have any idea's how to recover from this. I know this is an old motherboard, but it honestly angers me that both time it was a BH6. Just looking for some suggestions.

Here is the Setup: Abit KD7-E MB 1/3/03 bios date Athlon XP 1800+ Retail CPU (266 ?) Mushkin DDR PC2700 256 MB Stick Maxtor ATA 66 IDE Drive - Primary IDE Master 40x IDE CDROM - Secondary Master liteon 12-10-32 CDRW - Secondary Slave Pny Geforce Ti200 64 MB BB Black Friday card SB Live 5.1 oem

BAD BIOS CHIP FLASH? VISIT: http://BadBiosFlash.com For Replacement chips $15 re-flash of existing chip $8

**** Post for FREE via your newsreader at post.usenet.com **** BAD BIOS CHIP FLASH? VISIT: http://bioschips.nlan.org For Replacement chips $15 re-flash of existing chip $8 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= *** Usenet.com - The #1 Usenet Newsgroup Service on...

**** Post for FREE via your newsreader at post.usenet.com **** BAD BIOS CHIP FLASH? VISIT: http://bioschips.nlan.org For Replacement chips $15 re-flash of existing chip $8 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= *** Usenet.com - The #1 Usenet Newsgroup Service on...

BAD BIOS CHIP FLASH? VISIT: http://bioschips.nlan.org For Replacement chips $15 re-flash of existing chip $8

BAD BIOS CHIP FLASH? VISIT: http://BadBiosFlash.com For Replacement chips $15 re-flash of existing chip $8

BAD BIOS CHIP FLASH? VISIT: http://BadBiosFlash.com For Replacement chips $15 re-flash of existing chip $8

BAD BIOS CHIP FLASH? VISIT: http://BadBiosFlash.com For Replacement chips $15 re-flash of existing chip $8

BAD BIOS CHIP FLASH? VISIT: http://BadBiosFlash.com For Replacement chips $15 re-flash of existing chip $8