Any known problems with this board and overheating? Machines were being used 9-5 in an office environment (but may have been left on 24x7). Both running 3.0Ghz Pentium 4 CPUs. And in Antec Sonata cases. Three fans (PSU, CPU, & Case). Started locking up occasionally. If turned off and left to...

I am building a new system to replace my current system. I am looking at the GA-965P-DS3 with a Intel Core 2 Duo. I hope to reuse much of my existing system, case, ps, drives, most of which have been upgraded in the last year to try to get a little more life out of my old system... The big...

I am having problems with the temp and fan sensors. As indicated in EasyTune 4 my system temp is 38 C and the CPU temp is 32 C?!? The CPU fan is correct. I have a manual adjustment. The system fan shows 2116 rpm and the power fan 0 rpm. Unplugging the system fan caused NO change. I think that...

You need to update your raid drivers, not nVidia drivers. After raid was set up Windows XP did so automatically in the Windows update drivers section. "sid" wrote in message ... Gigabyte GA-7N400Pro (nForce 2) matched with ...

A colleague recently purchased a new computer, an Athlon 2800+ with 3*512M PC2700 RAM and a GA-7VA motherboard. I have tried to install Linux (Redhat 9.0) on it, but it consistently aborts during the installation process. But, with any two of the three DIMMS in place the installation is...

Installed MoBo and processor and 2X1GB ram sticks, everything OK, Started loading programs, everything OK, then rebooted overnight and system would not even Post, on screen it hung after identifying processor, right where it should say Memory interleaved, it just says Mem, and then stops, I left it...

I have just bought a GA-8I955X Pro motherboard. I realise that to install the SATA raid I must press F6 during OS installation and load the driver. However I will be using the Drives as follows. My two Optical drives will be on IDE1. My boot and data drives will be SATA My two IDE drives will be on...

I've been chasing my ass on this for better than two weeks and I finally pinpointed where this is coming from but can't figure out how to fix it. If I attempt to play any Quicktime .mov files that are saved on any drive that is on IDE 1 or 2 cable, it will crash the Quicktime program. This happens...

Just up graded from a GA-7VRXP to a GA-7N400 Pro2 because my new XP2800 (333) processor wouldn't go above 2000 in the older board. (266fsb limit) I was hoping to use Windows XP that's on my 120 gig drive that I used with the 7vrxp board. As per my usual luck, it won't boot. I've tried changing...

I had a GA-8KNXP Rev 1.0 running perfectly... I just purchased the GA-8KNXP Rev 2.0 for home and took the older board to work (i.e., only changed the MB) – The Rev 2 spontaneously reboots with bios FB (STD settings) may or may not be a Bios/board issue but seems most likely given nothing else...

In device manager there is an unknown device listed. I have no idea what it is and neither does windows. Any ideas?

My case has no vent fan near the CPU, so i need to get a new one. I'd like to get a cheap case if possible but from looking at pictures of them they all look like a tight squeeze. From what I can tell the memory sticks will get in the way of a 2nd CD-ROM drive in most of the cases. So if you...

MBM5 reports the +5V rail as 4.08V. My comp is running fine though, although i do get some slowdowns from time to time(seems like hard drive) and i had some weird graphical corruption once the first day I used it. But since then (about a week) everything is fine....

I need a new case and I am wondering if anyone has used this combo. I just need to make sure the drives will not block anything on the mobo

Holy crap I just got a Vantec Aeroflow for the 3000XP i just got and jesus christ it wouldnt fit because of that damn capacitor in the corner. I was desperate so i got a small metal file I had and ground down the corner of the heatsink and by golly it fits. Before i rounded the corner though it...

I got my N400 Pro2 installed and running. I went from GA7ZE with same hard drive. Using 1800XP. I tried booting up with old hard drive but it would reboot at XP loading, so i did an XP repair and everything is working great now. One thing that concerned me is that the CPU ceramic part does not...

Its been a few years since I took a good look at computer hardware, I currently have an XP1800 with SDRAM133. I am upgrading the motherboard to N400 Pro2, and getting DDR400. I cant afford a new chip for a few weeks, so can i use the 1800XP with the 400 ram ?

I have this old Alpha PAL6053 Heatsink and fan I've been using for years first on an Athlon 800, now an Athlon 1800. Can it handle a 3000 or is it too old?

Hello, I bought this board off ebay recently (rev 2.0). Using the onboard sound I get buzzing every time there is disc activity (sata if that's relevant). Do all boards do this or is mine faulty? What can I do, other than use a third party sound card? Thanks.

THIS IS ABSOLUTELY LEGAL!!!!! You are requesting a legitimate service and you are paying for it!! Like most of us I was a little skeptical and little worried about the legal aspects of it all. So I checked it out with the U.S. Post Office (1-800-238-5355) and they confirmed that it is indeed...