Folks, My venerable MSI 6163 Pro fried recently and I have just installed a second-hand Gigabyte GA-6BXC to get my development PC back on the air. I know PIII Slot 1 100FSB CPU was available up to 1Ghz and my 6163 could have coped (with the latest BIOS), but I cannot find any mention of the...

I've got a nForce4 K8 Triton board -- GA-K8NF-9 board with an Athlon 64 3000+. With two 512 MB PC400 DIMMs, memtest reports the memory speed as PC400 and it is stable. With four 512 MB PC400 DIMMs, all identical, memtest tells me that the BIOS has the memory speed at 333 MHz by default, and it is...

I've just bought a second-hand Fujitsu-Siemens Scaleo P which has a Gigabyte 8i848-PM motherboard. I can't find any reference to this board on Gigabyte's website, so I was wondering if anyone knows if it's identical to any of the following that are listed: 8i848P (rev 1.x) 8i848P (rev...

O/S Vista Home Premium unable to installsoftware from installation cd because vista will not read the disk Downloaded the intel p965 express chipset drivers fron the intel site but they will not load. The intel error log says "No INFs found that match the activedevices on the system" Any ideas ...

I've just built a system around this board and I can't get it to recognise the proper processor speed ( athlon xp 3000+ ) . In the frequency/voltage part of the BIOS it won't let me change the CPU clock to anything above 132mhz and that just makes it hang. What CPU speed should I be using and how...

Hi folks, I've just bought a GA-K8NXP-9 and I'm having trouble actually getting the BIOS to recognise the drive. The drive is a SATA Maxtor DiamondMax Plus 9 80GB. When I try to install Win2k, the CD is recognised, the drive is partitioned and then the WINNT folder created and then the pc restarts...

OK, I read a bunch of old notes about problems setting up Raid with the 7VRXP motherboard. Here's my setup: IDE1 Master 18GB system and stuff - boot disk IDE1 Slave 40GB IDE2 Master CDRW IDE2 Slave DVDRW IDE3 Master 160GB Removable carrier (master? of a security array)

I have a Gigabyte GA-7VRXP and I'm trying to figure out what the fastest processor is that can be put on it... Its a Socket A board with 200/266 MHz FSB. VIA KT333 Memory Controller. It says it supports from 1.4 GHz and up. BUT, where does it STOP? I've got 333 MHz memory in the thing. I'm...

Hi, I have a GA-81915PM mb, and am having difficulty using MBM with it. Can anyone explain the different sensors on the mb, or point me in the right direction ? thanx dq

Can someone please recommend me a good All in One Gigabyte Socket A Motherboard with a good onboard GFX Card. I already have the Socket A CPU (XP2600+/333) and DDR400 Ram... Thanks Dan

Greetings, My first time in this group. I'm encountering a strange problem with gigabyte board & have reached my wits end troubleshooting it. I will try to describe in detail whats happening and what I've done so far. 1. The problem.

Is there a chance to get an older bios than the two versions still provided by gigabyte? Both F1 and F3e don't boot from SCSI-CD-Rom. I can't get Win2k installed. So I would rather go back to version 2.6 (?) and do without ACPI support. Where could I get that BIOS version? Erik

Well, it has been almost two years since I last posted here. But much like my previous post in ... http://groups.google.ca/group/alt.comp.periphs.mainboard.gigabyte/browse_frm/thread/9cc35c345943eb96/4a37f76dc82cf784?tvc=1&q=8knxp+vorwerk&hl=en#4a37f76dc82cf784 ... I now find myself, for the...

hello! i have a question about RAM slots. it's said, that GA K8NF-9 runs only with 2 or 4 occupied memory slots. i have 2x512MB (different memory manuf., in 1st and 3rd bank) and it runs quite well. but when i try to install additional 2x256MB in slots 3 and 4, the computer doesn't start. it beeps...

Hi I was wondering if any one knows how to get the Nforce system tray for the sound set-up, I have just bought myself a new 17 tft monitor and want to add the speakers on the monitor with my existing speakers. My board is the gn-400NL1 gigabyte board. I have the sound card drivers from the...

I am running a GA 7N400L1 mobo and on gigabyte site it gives you a nvidia patch download, do I need to install this patch and also what chipset driver version am I running as I installed the one that come with the mobo and on the site they have 2.41, how do I find out and do I need to update to...

I am running a GA 7N400L1 mobo and on gigabyte site it gives you a nvidia patch download, do I need to install this patch and also what chipset driver version am I running as I installed the one that come with the mobo and on the site they have 2.41, how do I find out and do I need to update to...

I'm using the F9 BIOS now without any problems, but it does give an odd "no drives found" (or something) message on bootup, even though I boot fine to the SATA drive and have been running like a dream for two months like this. When I tried the F11 release, my SATA drive was finally detected...

have 7DXR board which has problems rebooting. A warm reset never works and a cold boot (i.e power off and on at the wall switch) only works after leaving the pc off for 5-10 minutes. Otherwise the machine powers on, drives and fans spin up but no inital beep from the board and no POST. Any ideas...

Hi all, I currently have a GA-6BXD (unfortunately I dont have the revision number on hand, but will supply asap) and I'm trying to get 2 SL5QV Pentium 3 1gig Coppermines to work on it. I have found that the following slotkets are the only ones capable: Asus S370-DL Abit Slotket III MSI 6905 rev...