From: "don" Subject: GA-K8NSpro Date: Saturday, November 20, 2004 4:50 PM I like the board, I though the ram would run at 200Mhz the bios will let me adjust the ram too 166 max have a AMD A64 ,ADA3000AX 754 socket thankyou

I like the board, I though the ram would run at 200Mhz the bios will let me adjust the ram too 166 max have a AMD A64 ,ADA3000AX 754 socket thankyou

I will be receiving this GA-K8NNXP MB in 3 days.I want it stable and no overclocking.I am looking at Mushkin 3200 any othe suggestions.I see Kingston mentioned what model or type. Thank You Don Murphy

I am putting together a AMD 64.I purchased a no OEM with the fan and CPU. Years ago they had out a device you could change the 40mm fan on the cooler with an 80 mm slower and quieter fan. Is this still being done and if yes what is being used. Thank You Don Murphy

I have now received my K8NNXP and am now looking at ram. I have it down to 2 Kingston Hyper x 3500 or Mushkin PC4000. Anyone use either of these. I have used Mushkin in the past and their ram has always worked well for me. I have never had to return 1 stick. Thank You Don Murphy

Can someone tell me what happens when I select Top Performance on the BIOS setting screen? The manual only says make sure your stuff can be over clocked. Am I to assume this setting will over clock my system in some predetermined way? I assume optimal are the settings the cpu and memory claim...

I noticed that my system clock was reported as 1742 instead of the 1733 it should be. I decided to see if maybe I had inadvertently selected top performance. I looked and top performance was off so I decided to turn it on to see if it would change anything. It did. So I turned off by loading...

On Sat, 21 Aug 2004 16:36:08 GMT, "Travis Jordan" wrote: And similar posts elsewhere -- Correct! What do you suppose is the purpose of these posts? You would be very wise to keep your nose out of where it does not

I've got a rock solid system with an 8ge667. It's got a 512 DDR333 dimm in it. I attempted to add another 512 dimm (same manufacturer... Kingston, same speed, same timings, although it doesn't look identical... there's some capacitors in different places etc.), and now my PC hangs before it...

Hi, I upgraded XP Professional to Windows 7 Professional via an upgrade disk to / on a HD, which was successful, and running for quite some time, successfully as well. How can I transfer all of this to a new SSD and continue on? Thanks.

GIGABYTE GA-MA74GM-S2 AM2+/AM2 AMD 740G Micro ATX AMD Motherboard does this board support dual monitors with the onboard video?

My motherboard has a 533 mhz fsb bus and the recommended DDR speed is 333 MHz (PC2700). Will I lose on performance or damage anything if I use a DDR 400 MHz (PC3200)?

Here is my question on the G.Skill forums posted yesterday. No responses yet. A comment from Paul would be great -- he is always helpful. Help from anyone is also appreciated. I need it. Thanks. See below ... Don *****

I have installed Windows XP from scratch after installing new GA-7N400 Pro2. What is weird is that Windows "forgets" each driver instal. I will install a driver, check that it works correctly, but after restart, it will show this device as not having any driver installed. When I press "Update...

Actually, it did not die but is badly crippled. It worked fine for 30 days with Athlon XP 1800+ and 2x512MB DDR400 (Corsair Value Select). I ran the memory at 266MHz. Last Sunday while working with Windows XP I suddenly got BSOD, and since then the only way I could get the computer to work was...

Hi, I just got a new PC with the 8IPE1000 Pro 2 MB. 1) The Giga Byte Face Wizard doesn't work. It just freezes up after a while and a few minutes later says it can't read from a bin file. (I'm using a logo from their own website) 2) Easy Tune 5 doesn't work. The CIA/MIB tab is grayed out and this...

This board works OK with 1 256 Mb PNY DDR400 or 1 Kingston 512 Mb DDR333. However, if I fit either of these types in pairs, XP won't boot. Each of the 4 sticks works OK on its own. At boot the memory speed is reported as 333 MHz. The CPU is 3.06 GHz 533 MHz FSB with hyperthreading enabled in...

I have a Gigabyte 7VRXP with two 80GB HDD in Raid-0 under WinXP. How can I tell if they are operating under ATA 133? Thanks.

Hi all, I know enough about motherboards and hardware to get myself into trouble, so I thought I would ask first. I think that one of my two HDs is dying, and I want to install another as a backup. I installed a DVD+RW into this system myself, so I'm somewhat familiar with the process. I have a...

A friend of mine has a GA-6BXE Rev 1.9 based machine and is looking to replace the existing Matrox G200 card with something with more memory (to run Age of Mythology). I have seen some warnings about GeForce cards, and I'm definitely not up to making wiring changes to the motherboard! Would a...