|
|
USB PORTS on 8KNXP REV1 ? by
Denis Fitzgibbon
Hi
I have a REV1 8KNXP Bios F10 and running XP Pro SP1 plus all the other
patches.
In my device manager under USB controllers I have 5 controllers listed but
only one
as a USB 2.
I was wondering should all the USB controllers be USB 2 ?
regards
Denis
|
July 23rd 04 01:58 PM
by Rick
|
3 |
191 |
|
|
8knxp bios 5v fail? by
Dennis
the bios of my rev.1.0 8knxp shows that the 5 volts has failed but the
system seems to be running just fine. i did not oc anything just running
standard it hang when i was using my pinnacle pctv pro for a while, i did a
reboot and all was running fine but stil the bios said that the 5v has
failed,i...
|
October 23rd 03 01:43 PM
by Dennis
|
0 |
601 |
|
|
+5v probs HELP!! by
Dennis
Does anyone have +5v probs with 8knxp rev. 1.0 bios F6. Tried just about
everything possible but instability remains. Giga-byte support sucks here in
holland!
I didn`t OC the board,just running standard does anyone have the same
problem?? Voltage goes from 1.7volts to 6.8volts but never the right...
|
November 4th 03 06:54 PM
by John7
|
1 |
706 |
|
|
Gigabyte GA-7VAXPand Windows XP by
Dennis Alperstedt
Hi,
I bought a computer in november last year. All worked fine under
Windows2000. Then, i installed Windows XP, because Windows2000 didn't
recognized the onBoard-RAID-Controller correctly.
But now i have another problem: at my secondary IDE-Channel i connected two
devices: a Toshiba SD-M1612...
|
|
5 |
336 |
|
|
PS/2 Mouse/Keyboard Issues with 8KNXP MB on F5 BIOS by
Dennis Bareis
Hi,
I am having troubles with my PS/2 connected mouse and keyboard, either
one or the other or both but mostly the mouse.
The keyboard/mouse basically becomes unusable (nothing happens - as if
not connected), however if I disconnect the cable to the failing
device and reconnect it it works. As...
|
|
0 |
220 |
|
|
SMART is disabled by
Deon
Hi there,
I'm new to this NG, so thank you very much so long for your help.
I have just bought a PC with a GA-K8VM800M motherboard which I am very
happy with. Upon booting, I notice that the S.M.A.R.T. function is disabled
on my motherboard. Where do I enable it again? I want this to be...
|
|
2 |
316 |
|
|
GV-NX66T128VP with Vivo by
Derek
Would anyone know what chip is used to enable vivo function on this
graphic card? The chip itself would be located on the backside. Many
graphic card manufacturers used to use Phillips chips but Gigabyte could
solder in a chip from any number of suppliers.
Also, any comments on using the vivo...
|
October 23rd 05 07:12 PM
by Derek
|
0 |
274 |
|
|
Gigabyte GA-K8NS by
Derek Baker
Considering this as an alternative to the MSI K8N Neo Platinum I was going
for. Don't need the Gigabit Lan, Raid, or 7.1 sound of the MSI.
Any thoughts on this?
Thanks in advance
--
Derek
|
|
0 |
219 |
|
|
bios upgrade by
Derek Smith
I have recently aquired a GA-6VXC7-4X-P motherboard and am trying to upgrade
bios from 6XVC7-4X.f8 to 6XVC7-4X.fc.
(the one supplied by gigabyte) using the dos upgrade prog FLASH853.exe.
Everything goes ok until the programming stage when it hangs after the first
two sectors.
My original bios is...
|
|
1 |
300 |
|
|
wrong processor speed reading by
desert
Just installed a GA-7DXE motherboard with an athlon XP2600 Thoroughbred
cpu. When I boot up, the system only reports the cpu as a 1.1 ghz. On
m/board is an option to change cpu speed from 100 to 133 but if I change
from default of 100 then system will not boot.
This mothorboard is advertised as...
|
|
3 |
288 |
|
|
GA-7VRX 1.1 and 120Gb hd by
devilo
Someone tell me if the motherboard in object is compatible with a samsung HD
120gb.
On bios and winXP the max capacity read is 33...Mb
i upgrade the bios with the last beta of 2003
thanx
|
June 6th 10 02:00 AM
by Paul
|
3 |
1,725 |
|
|
GA-8IPE1000 Pro3 - CPU fan mounting holes? by
DevilsPGD
I have a Gigabyte GA-8IPE1000 Pro3 motherboard and I need a new CPU fan.
All the fans that appeal to me look like they require a CPU mounting
bracket/holes in the motherboard, but off hand I don't recall seeing
any.
Does anybody happen to know for certain if I can use a CPU fan that
mounts this...
|
May 3rd 05 01:56 PM
by kony
|
3 |
227 |
|
|
GA-8IPE1000 Pro3 / CPU temperatures by
DevilsPGD
I have a GA-8IPE1000 Pro3 with a P4 2.8GHz (can provide more details if
needed)
I recently grabbed a copy of SpeedFan to monitor my system's
temperatures to help me position the fans in a new case.
FWIW, my goal is to go positive pressure for the entire case and filter
the air intake to reduce...
|
|
4 |
954 |
|
|
GA-8IPE1000 Pro3 / Chipset fan by
DevilsPGD
I happened to be poking around in my case and unplugged the chipset
fan... Damn is that thing loud -- It's noiser then my CPU fan.
Any thoughts as far as replacing it goes? The gigabyte replacement is
$20, there are a few other chipset fans available that are the in the
same price ballpark.
I'm...
|
|
2 |
202 |
|
|
USB power by
DevilsPGD
I'm running a GA-8IPE1000 Pro3 (latest BIOS, for whatever that's worth)
Is there any way to turn off the power to these external devices when
the system is powered off?
I've got a few accessories that light up when they detect power coming
from the USB ports, and a USB external hard drive which...
|
October 31st 04 11:46 PM
by Jim
|
4 |
435 |
|
|
GA-K8NXP-SLI by
DevilsPGD
I recently picked up a GA-K8NXP-SLI. Looking at the block diagram in
the manual, the one SATA adapters (looks like it's on the PCI bus), the
other four SATA ports are run directly off the chipset.
I'm thinking that the higher performance drives should be on the SATA
adapter running off the...
|
|
3 |
486 |
|
|
memtest86 reporting memory error by
DevilsPGD
I just purchased a new motherboard, CPU, and video card, built the
system, ran memtest86 and I'm getting memory errors.
I purchased:
Athlon X64 3000+ CPU
Gigabyte GA-K8NXP-SLI
Radeon X550
P180 Case
From my old system I scavenged:
( 1 2 3)
|
|
23 |
1,369 |
|
|
GA-8IPE1000 Pro3 by
DevilsPGD
Built a new system a couple weeks ago, GA-8IPE1000 Pro3 with a
P4/2.8GHz/800FSB/HyperThreading.
In GMT 2.0 in the "Processor information" it shows current speed as
2800MHz, which is good. It also says External Clock 200MHz -- Is this
representative of the FSB, in which case shouldn't it be...
|
|
2 |
1,281 |
|
|
SLI required? by
DevilsPGD
I have a GA-K8NXP-SLI and I'm currently using a ATI x550 video card. I
don't game, and don't need the SLI capability, but I'm wondering if I
can install a second PCI-Ex16 card for use with multi-monitoring or do
they have to be configured in SLI and outputting to a single monitor?
--
In case of...
|
|
1 |
343 |
|
|
Dual BIOS -- Update both? by
DevilsPGD
Thoughts/opinions -- After updating the primary BIOS and confirming
everything works, should I update both BIOSes, or leave the backup.
--
Ah, the miracle mile, where value wears a neon sombrero and there's
not a single church or library to offend the eye.
|
|
3 |
431 |