|
|
FS: Compaq DL380 server (loaded!) by
TekRecycle.com
2GB RAM
4 - 18.2 10K RPM SCSI III drives
dual 1GHz CPUs
single power supply (dual capable!)
onsite warranty until Oct 31 2004 !!!
$2400 obo - can deliver or meet in AZ (Scottsdale, Phoenix, Mesa, Chandler
and surrounding areas)
|
|
7 |
1,345 |
|
|
BIOS tweaks for PL3000/PII to support PIII cpus by
msg
Greetings:
I need to modify the PL3000/PII BIOS code to recognize the IDs for
PIII cpus; if the supported IDs are in a table, it ought to be
straight-forward to replace some entries for the new cpus and
regenerate the checksum for the block.
I don't care about including microcode updates or...
|
|
7 |
549 |
|
|
Speed of Hardware RAID by
Will
One thing I have noticed recently, as result of the recent discussion on
hardware versus software RAID, is that the two drive LUNs we have created
through the Smart 5i hardware RAID in the DL380 G3 servers we have are
lightning fast by comparison to the same drives mounted JBOD on an...
|
|
7 |
766 |
|
|
Console Management Controller by
sirio
Hi,
I NEED YOUR HELP!IS THERE ANYBODY THAT CAN HELP ME TO CONFIGURE MY
COMPAQ Console Management Controller? THANKS!!
|
|
7 |
577 |
|
|
Using old SA 3200 controller in new computer by
T-Man
I am bulding a new computer based on a Asus M2NPV-VM motherboard, and
was thinking of keeping the Smart Array Controller and the SCSI-disks
(I have 6x36 GB and 6x72 GB disks to play with) from an old Proliant
1600 server.
Can anybody see any problems in this, before I am palcing my order for
the...
|
|
7 |
1,159 |
|
|
|
|
7 |
601 |
|
|
Fibre Channel Question by
[email protected]
Hi Folks,
It's been a while since I've posted anything. I have a question that is
not really a Compaq/HP server specific question, but the solution will
more then likely be running in my PL6500.
So here goes, I have an HP 146.8GB FC SCA2 drive, with an Emulex LP9802
(LC connectors) card. I was...
|
|
7 |
655 |
|
|
Extending array by
Shiraz
I have a MSA 30 with RHEL 4. I used the HP Array utilities to expand
the array over 2 new drives. The expansion is done according to the HP
insight but when i do a df -k, i dont see the extra added space. any
suggestions?
thanks in advance
|
May 18th 07 12:52 AM
by Phil
|
6 |
891 |
|
|
ProLiant 1600 and Fedora Core 5 by
Jeffrey Alsip
I am having an unusual problem getting FC5 to work on my 1600's. No
matter how many times I run SmartStart 5.50, setting the OS to Linux, I
can't get the OS to recognize a standard connected PS2 mouse. Am I
doing something wrong? I have tried everything that I can think
of...have I, somehow,...
|
|
6 |
335 |
|
|
enclosure 4350R / controller combination? by
Phil
I have some of the following:
Drive enclosure 174630-B21 DS-DDL-10-RD (4350R)
190213-B21 Dual Port Ultra3 SCSI Module
with 10 Drives 180732-009 72.8 GB 10K rpm
Can I use these on 5300 or 5304 Array cards in DL580's. Problems?
Many thanks,
Phil
|
January 17th 06 06:18 PM
by Phil
|
6 |
483 |
|
|
Compaq Proliant 6500 Server by
[email protected]
Hi all,
I have a Compaq 6500 which will not power up - have checked all the
connections - Stripped down and rebuilt, to no avail.
The Fan Controller Board has the 5V-AUX LED illuminated - and the
management panel on the front is powering on - both power supplys show
green LEDs indicating...
|
|
6 |
323 |
|
|
Smart Array upgrade - drive faults on all drives? by
Jason Arthurs
I've finally got my Smart Array 3200 card and swapped it into the
Proliant 3000 this morning. Unfortunately all the drives now show
fault lights as soon as the machine powers up. The four lower ones
then show a green light and the yellow light once the card has run its
configuration. The top three...
|
|
6 |
282 |
|
|
Compaq Smart Start 5.5 CD Error by
Peter Graves
Hello
I am having a helluva problem burning a Smart Start CD - one downloaded
from HP/Compaqs web site (two different locations) and one that I
acquired through here (Nutcracker I think).
Anyways - it burns the data ok but when it comes to boot the thing just
will not - always coming up with the...
|
|
6 |
279 |
|
|
Trying to salvage data from raid-0 simplex array on a dead proliant 3000 by
Phil
Hi all,
We have an old Compaq Proliant 3000 with Smart 2DH array controller and
wide-ultra hot swap bay containing 4 drives configured in raid0 simplex
mode.
We had a power outage yesterday and it looks like the PSU has died. We
have no warranty, support with Compaq/HP or sister...
|
July 14th 05 09:03 PM
by Phil
|
6 |
366 |
|
|
Difference between F1 and U1 Storage? by
I.P.Freely
Hi, wonder if anyone can help me. I have just taken into stock from a
corporate clearance a large number of U1 and F1 rackmount storage arrays.
Both models look to be identical and I can't find any info on the web
regarding the difference, can anyone in here give me a quick rundown of...
|
|
6 |
134 |
|
|
SmartArray 2/P -> 3200 procedure by
Tony
Hi,
I have a 6500 PPro/200 with a 2/P array configured as RAID5 with a
backup drive. I've been thinking that I may upgrade to a Smart Array
3200 if I run across one that's a good deal on e-bay (i've seen a few
the past month or so that have gone for less than $40).
Now, my question is what would...
|
|
6 |
405 |
|
|
|
|
6 |
1,106 |
|
|
|
|
6 |
352 |
|
|
Non bootable PCI IDE controller? by
Mark S
Does anybody know if there is such a thing as a PCI IDE controller,
preferably UDMA 100/133?
Reason.....
I have a Compaq Proliant 5000 running Win2K SVR, and I am trying to put 4
120Gb IDE HDD's in it. I have tried various PCI IDE RAID cards in it, both
with the SCSI Raid controller in and out of...
|
|
6 |
363 |
|
|
Using MSA50 As SAS JBOD? by
Will
The MSA 50 JBOD SAS enclosures have some kind of high density mini connector
on them that mates to the SAS RAID controllers like the P600. Does HP make
any adapter that would allow us to use these boxes as a pure JBOD solution?
I am trying to set up a testing station for SAS drives, so I need...
|
July 3rd 07 02:50 AM
by thomas
|
6 |
823 |