|
|
7vaxp ultra sata controller bios and SATA data corruption by
Dimitris
Is there a utility to flash the bios of the onboard silicon image sata
controller? Its bios is 4.1.35c and the seagate barracude 120 has data
corruption problems. I installed a pci silicon image controller and
had to flash its bios(it came with 4.1.34!!) to 4.2.15 in order to
make it work with the...
|
|
0 |
784 |
|
|
7VAXP Ultra USB Prob by
ukbootlegs
The two main usb ports on the mobo work fine, but I connected the
extra 4 usb ports from the 2 additional usb sockets on the mobo but
they don't work at all.
Any ideas?
They are enabled in bios.
|
|
1 |
285 |
|
|
7VKMP Temp monitors by
waZZZy
Where are the temp monitors for the CPU and system on this board.
My idle CPU temps are usually 58-59C and playing MOH temps may get to 62C.
System is stable.
I am thinking that the there is something amiss with the monitors.
System
GA-7VKMP 512MB Ram
XP2200 w/stock cooler - not OC'd
|
January 2nd 04 04:04 PM
by waZZZy
|
0 |
191 |
|
|
7vm400am-rz ..sata but no led by
Paul.S
Hi ..
I have just built a system using a gigabyte 7vm400am-rz motherboard,sempron
2600+ and a western digital 160 GB SATA HDD.
However i am unable to get the LED on the case to light up, I have tried
both polarities on the LED and also tested the HDD LED by putting it in
place of the power LED...
|
|
1 |
131 |
|
|
7VM400AMF problem? by
BJH
Hi
I've just upgraded my aging PC with a 7VM400AMF board, 512Mb 333 RAM and a
Sempron 2800 CPU.
I just can't get it to work.
If I have the CPU clock switch set in the Auto position I get a two-tone
beep and the PC switches OFF. If I have it set to the 100Mhz position the
BIOS reports the CPU as...
|
January 21st 05 12:11 PM
by BJH
|
1 |
202 |
|
|
7VM400M by
Old Bill
I am looking at purchasing a PC with this Gigabyte MB for use with AMD 288+
CPU and 512 DDR333 RAM.
Any comments appreciated.
|
|
2 |
248 |
|
|
7VM400M-RZ PROBLEM by
dougthered
I've just built a system around this board and I can't get it to recognise
the proper processor speed ( athlon xp 3000+ ) .
In the frequency/voltage part of the BIOS it won't let me change the CPU
clock to anything above 132mhz and that just makes it hang.
What CPU speed should I be using and how...
|
March 31st 05 12:15 PM
by doug
|
4 |
183 |
|
|
7vrx - problem bios upgrade F7-F8b by
ingenuo
I have a mainboard gigabyte 7vrx with bios version F6. I have upgrade bios
to F8b version and my modem ISDN PCI begin to breck connection to internet
after few minute and block telephon line. I try to upgrade bios to version
F7 but the problem not disappear. Only with F6 version I work fine.
I...
|
|
0 |
325 |
|
|
7VRX 2.0 and autopower-on by
nut cracker
Hello Friends,
I just rebuilt the system above for somone, and when you tell the system to
shutdown... it shuts off.
for about 4 seconds, then it powers itself up again.
I have not seen this happen before.
Is there some magic APM setting in the BIOS that will make or prevent this
|
|
2 |
334 |
|
|
7VRXP & RAID & external devices by
Daniel Böttcher
Hi!
I got two big problems with my GA-7VRXP:
1) RAID: I connected two Samsung harddisks (SP1614N) at the onboard
RAID-controller (Promise Fasttrack133 Lite), created an array
(settings: performance, desktop) and installed a clean Windows XP +
SP2. System runs fine so far but I got no speed gain...
|
|
2 |
141 |
|
|
7VRXP - WinXP install problem with IDE RAID = Mirror by
Dale Sampson
I am helping a friend do a format/reinstall of XP-pro on his system. I
can't get Win Setup to recognize the RAID.
The RAID is configured with 2 WD-80GB disks in mirror configuration.
There is also a single WD-160GB USB disk (this is the only disk setup every
sees).
I made a floppy with the...
|
|
0 |
1,288 |
|
|
7VRXP CPU upgrade question by
[email protected]
I've got a 7VRXP Rev 1.1 Currently it's got an old XP1700+ and a
512megs PC2700 RAM.
I'm looking at slapping in a new CPU and another 512megs of RAM.
What's the best CPU that I can mount on this board?
|
|
3 |
178 |
|
|
7VRXP drivers - what to do? by
neogeoman
I have a 7VRXP and it's been a hugely reliable and stable board since I
gave it a beefy power supply. I want to do a reinstall and I reckon
fresh drivers are key, but Gigabyte's site only offers drivers for the
7VRXP 2.0 and I have a 1.1... What do I do now? O_o
Not keen on risking the wrong...
|
|
1 |
391 |
|
|
7VRXP Question by
Double-T
I have a Gigabyte 7VRXP with two 80GB HDD in Raid-0 under WinXP. How can I
tell if they are operating under ATA 133?
Thanks.
|
|
2 |
331 |
|
|
7VRXP v2.0 m/b by
Zilla
Old I know but works for the most part...
I keep losing USB connections on this board. For example
all of a sudden my USB keyboard or mouse loses connection
(no response from mouse of keystrokes). I have to unplug/plug
them. I've updated the latest drivers, and Win2k/SP4 updates.
I have a 400W...
|
July 12th 05 03:53 AM
by Zilla
|
2 |
340 |
|
|
7VT600 1394 by
B.Mc.
GA-7vt600 1394
Does anyone know where this motherboard is available for purchase?
The GA-7vt600L is widely avaible, but I have only seen the 1394 version
listed at a New Zealand site. I live in the USA
THANKS,
B.
|
July 22nd 03 11:16 PM
by B.Mc.
|
0 |
749 |
|
|
7VT600 and 7VAXP both funky?! by
Ben Simon
I had a 7VAXP which I moved from my workstation to my server. Funny
thing happened when I moved it. Instead of putting in an AGP card, I
installed a dinky PCI video card. I noticed the thing wouldn't boot.
Fans would jerk for a moment and then nothing...but the amber light on
the mb stayed on. So I...
|
|
7 |
361 |
|
|
7VT600P-RZ : computer stop working after beeps by
Christian[_3_]
Hi,
Since few days, my computer stop working.
When it run, after some times (10mn, 30mn, few hours),
it beeps and stop immediately. This is four times
one long beep and one short beep, in dual tones.
I've no idea about this trouble.
Any help would be very appreciated.
|
|
3 |
409 |
|
|
7VT600P-RZ CPU Temp by
SteveK
Hi all,
This is a very smooth board. However, one thing:
Looking at the CPU temp reported in EasyTune4 - CPU 55C
Comparing with Speedfan 4.17 - CPU 43C
Could it be that ET4 reports CPU's on-die temp?
feedback appreciated!
Steve
|
October 23rd 04 06:52 AM
by SteveK
|
2 |
696 |
|
|
7VTXE+ doesn't detect new RAM by
BC
I had one 184-pin 512 MB DDR PC2100 RAM module installed and now I want
to add another 512MB stick. When I add a second module of the same RAM
(184-pin 512 MB DDR PC2100 RAM ), the system just doesn't see it. It
sees the original 512MBs, but it doesn't see the new RAM. I've tried
different...
|
|
3 |
314 |