For years now I've had problems with not just downloads but just navigating Gigabyte's site. SLoowwwww. Seriously slow. As of right now I can't get the chipset or audio drivers for my old Nforce2 motherboard. Hard drive went south & I've installed a new build on a new harddrive & I...

Hey all, Would anyone have either of these mobos? I'm in a forum and 2 guys have these mobos. The prob is, dual channel doesnt work on either of them. They've tried all combinations, to get dual channel to work, the P35-S3 also freezes when the guy put ram in slot 1/3 or 2/4.

I purchased a CoolMaster Centurion 5 case from New Egg to build a new computer. I am using a Gigabyte GA-P32-DS4 motherboard. There are two wires in the Centurion 5 with separate connectors that are not labeled. They are white and green and they are twisted together. It was my guess that they...

sound crackling and popping was nonstop installed all latest drivers and bios, could not fix the sound issues today, exited EZTune which came with Gateway FPD2185W, and magically the sound issues all went away

I just recently bought a Gigabyte P35-DS3R with a 2.0G dual core processor. It has been working great, but I was installing linux as a dual boot the other day and I put in an extra IDE drive on a PCI controller and now it won't even boot. It stops at the memory test and even the keyboard will...

I have a GA-K8N Pro SLI motherboard and am currently experiencing boot problems. I built the computer about a year and a half ago. When I first built it, I had problems with the machine going into the NVidia Boot Agent and not booting XP. When it stopped happening, I stopped caring... However,...

When I boot my GA P35DS3R ver 2.0, I get 2 clicks before the beep & the bootup. What are the "click" codes, if any; are the clicks normal? the setting on shutdown the "power loss" is set at S3 in the bios (think S1 doesn't turnoff the computer off).

Allow me to start by stating that I've not only searched everywhere in other forums, but I've also read the following post below several times to try everything available: http://www.hwkb.com/Uwe/Forum.aspx/mainboard-gigabyte/3587/Gigabyte-965P-S3-problems-with-SATA-Hard-Drive-help I have a...

updated bios on GA-MA69G-S3H to get hardware virtualization entry. now can only have 2 entries for boot selection. if I add a 3rd, one of the other 2 gets dropped. went from F2 to F4 version of bios. used the @Bios updater to do the job. any ideas

How is it possible that there isn't an option to hide boot menu and qflash from post on GA-945GCMX-S2? This way every hog can screw up the BIOS and format the HD without asking the PC's owner permission first.

Mainboard is a GA M59SLI-S5 Already have a WDC WD3200KS which I play games on. I have another HDD exactly the same and want to know if I can configure this for raid with the above. Thanks for your help God Bless

I wish to fit a Pent' 3 Skt 370 1 Ghz processor type SL52R to a 6VX7-4X F2 Motherboard. The specifications for the M'board says that you can fit this processor but I cannot find any references to the dip switch settings required. At present a Pent' 3 600 Mhx CPU is fitted. Can anyone help...

I bought one of these motherboards on ebay (revision 1) and when I put memory modules in either slot 1 or 2 the machine starts up, the fans start spinning but it then stops. After a few seconds it tries to start again but again stops. Looking through posts in this usergroup it would seem that...

Hi: I am in the process of choosing a mobo. I noticed several models of GB mobos say they run 1333MHz FSB on Intel P965 chipsets: GA-965P-DS* boards and GA-965P-S3, for ex.: http://www.gigabyte.us/Products/Motherboard/Products_Overview.aspx?ProductID=2485

I'm building a computer and need advice on what memory to get. Systems specs a CPU: Core 2 Quad Q9550 with a FSB of 1,333MHz (due in 1/08) Motherboard: GA-X38-DQ6; supports 1,066MHz memory and 1,333MHz FSB RAM: 4 Gb of DDR2 I will NOT be overclocking. I've heard that it is preferable to run...

Hello, I've just set this board up under Windows Xp and I cannot get the onboard sound to work. I have installed the ac97 drivers off the gigabyte cdrom and I have also used the windows update to download and install and replace these with the nvida sound drivers but I still can't hear anything!...

Hello, I had a ga-7n400pro board which was running a 1GHz athlon. I decided to upgrade the athlon to a 2GHz one. I took the usual anti static precautions etc. but since replacing the CPU the board has been dead. It will not boot; it does not even beep at bios; the screen remains blank and...

Hello, Some months ago I bought what I thought was a GA-7N400pro2 board off ebay. It worked fine until last week when it blew up (please help - see other thread). I managed to buy another off ebay and I noticed it was different in appearance. it seems the second board is a genuine ga-7n400pro *2*...

The software comes with my p35c-ds3r. Is it supposed to be a trail version only? I am not able to find any cd key for it on the envelop nor inside the mobo packing.

Hi Gigabyte mb experts, I'm in the process of finalizing the install of my first Gigabyte board, a P35-DS4 (rev. 2). I basically got it up and running under Win XP Pro using an E6850 CPU, a ATI 2900 Pro video card, a 350GB HDD and an LG DVD drive. All powered by an Antec 650W PS. I did notice...