On Thu, 12 Jun 2003 22:26:11 -0700, "AJ" AJ@COM wrote: Hi, I get a "Check System Health!" message on boot up but all checks look fine and the system works well - does anyone know why I get this message? Thx I had same error. In my case, I did not have a fan plugged into the

I just update the bios on my GA7DXR from F10A TO F10 WHICH WAS released on July 16th 2003 is there any difference between the two I was unable to find any

Can someone help.. please! Dave "Dave Catchpole" wrote in message ... Good Morning all. I'm currently troubleshooting a fault of a work clients PC, get an error code (through speak) of a SHort Bleep, followed by a...

Just to let you know it is possible to have a SATA drive and IDE on IDE1 at the same time, cant remember the setup I used of hand but if you want to mail me I can send it to you. I set mine up as follows. IDE1 = Sony DVD writer (master setting) IDE2 = Samsund DVD player (master) IDE3 = WD 40Gig...

Aussie, on your reply to a recent post by Rob about the 7VAX you mentioned you had your Barton 2500 running at 2200on a 7VA, is it the early rev board with the 3 position clock selector or did you unlock the cpu with the wire trick on the board in the socket or under the cpu between the pins? I...

********************************************************* * This article is posted by an unregistered version of: * Newsgroup AutoPoster PRO version 1.3.7 ********************************************************* We know it sounds TOO good to BE true, but it’s REAL! Our International...

"Lance Robertson" wrote in message ... "Richard Dower" wrote in message ... Yes...there is an option in the BIOS for this, power on by USB...

1) have anyone a irq-sharinglist for this board ? 2) is the onbord-lan getting every start a new Irq ? or can i fix the Irq for onbard-lan in "PNP/PCI Configurations" ? (example: onborad-lan is shared with PCI3 and i set PCI3 to irq 3 - onboard-lan fix on irq3)

GA-7vt600 1394 Does anyone know where this motherboard is available for purchase? The GA-7vt600L is widely avaible, but I have only seen the 1394 version listed at a New Zealand site. I live in the USA THANKS, B.

Hi all, I'm new to the group and to gigabyte MBs. I have a working XP system with one HD and would like to change to Raid 1. Entering auto setup, I only get the option for "Performance", not "Security". The desktop/server/AV options can be changed. The MB is a GA7DXR+, the BIOS is at F8, the...

The BIOS only allows voltage increase how do I lower it? Have P41.8G and core voltage is currently 1.79V to 1.80V.

I've just purchased a 8IK1100 and a 2.4 with plans to overclock. I've been reading through the problems that people have been having with overclocking and/or memory issues with this board and now i'm thinking of returning it for another board. will I run into problems even doing a simple...

you certainly are! "Colostomy_Bag" wrote in message just buy a new case you tight get

"MiniDisc_2k2" wrote in message ... Okay, I've been getting this error about once a month, after I come out of standby (S3, a.k.a. STR). It doesn't say any error message like the other BSOD screens I've seen, such as...

It is not related to BSODs. Problems with Corsair RAM were related to the memory timings programmed into SPD, they were too aggressive and caused boards not to boot. It has been fixed with New BIOSes. -Paul -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----

Would running a 533 Mhz FSB CPU like the 3.06 Ghz P4 on the 8IRXP be just a matter of running the FSB at 133 Mhz without the need for voltage increase? I'm currently running PC2100 DDR Crucial memory, and I assume that either needs to overclock to 133 MHz or run PC2700 memory at 133 Mhz?

nope, you're about 100W short of stability in my opinion. "markOpolis" wrote in message ... Hello everyone, In my neverending quest for stability, I'm wondering if my Antec SmartPower 300W delivers enough power for my...

I had a RAID0 array (2x100gb WD1000JB) on another board with a Highpoint controller, but any performance improvement was only apparent on benchmarks. The ITE setup on the 8KNXP is renowned for its mediocre performance, although I've never tested it, and when I set this new system up I went instead...

"Roger Zoul" wrote in message ... What info is written to a RAID array to make it work? The reason I ask: I'm currently running a Raid 1 array on the ITE IDE Raid controller on my Gigabyte SinXP1394. I'd like to...

Just curious, If I install overclocked memory @466. Can I run an XP 3200+ @ 400? I guess it's wishful thinking, don't think my 5200 FX ultra video card could handle it.