My RAID controller is seeing two arrays when I only have one. I was trying to get my DVD burner working (it stopped and I don't know why). Went into BIOS and made it the bootable instead of the other CD drive I had. Wanted to see if it would boot off the CD. Also made sure Bios saw it. Saved. Now...

I just got DSL and was wondering on my A7N8X Deluxe board if I had my NIC card set right Duplex-Auto select, boot PROM enabled, media type - auto select. Sorry for the newbie question.. Thanks for the help

SIS R659 RDRAM launched: 9.6 GB/s for the Pentium 4 (HARDWARE) By Johan Wednesday, November 5, 2003 5:20 PM EST RDRAM could make a surprising comeback, thanks to SIS. SIS and Rambus launched today the SISR659, a chipset that is capable of using 4 (16 bit) 1200 MHz RDRAM channels. When you do the...

Hey all. Just noticed in my BIOS that under IDE Settings, 32bit Disk Access was disabled for my drives. I have (2) SATA Maxtor 160s connected to the SATA controller, and (2) Maxtor 160s connected to the SATA RAID controller. Thanks.

cpu: intel 2.6HT FSB800 mobo: asus p4p800, revision: 1.02, bios: 1010 ddram(borrowed for testing, all in the ASUS DDR400 QVL, 256MBx2): from Transcend, Kingston, Samsung and Apacer. agp: prolink gforce mx2(AGPx4, 1.5v of course) pci: none, nothing was installed sound, nic, built-on mobo no other...

Well my ASUS P4T-E is now toast because I flashed the wrong bios. I got it off the ASUS site but must have clicked the wrong one. In any case I have to get a new board so am looking to upgrade at the same time. What my better half does not know will not hurt her. :-) The problem is I have two...

If something is only using one thread, a very CPU intensive thing like WinRAR, is it only using 1.5 GHz of my 3 GHz CPU? Because when I look in task manager it shows 50% CPU in use and 50% idle!

If I RAID 0 two identical 120 GB hard disks, do I get 240 GB of storage or 120 GB?

First let me lay out my self built system: AMD 2800+ A7N8X mobo (non deluxe) I was one of the first to by it when it came out so it's an older model. I am using the latest All-in-one drivers and the latest 1.07 flashed BIOS. 512 MB Corsair RAM (3200) 350 Watt power supply (second one i've had...

Hi All, I have just upgraded my CPU to xp 2600 Thor not barton My Bios if the original that was on the board. The auto setting on the board says that I am running a XP 2000 Do I have to change the jumpers somewhere. Cant understand the manual ( just new at this ) system specs Xp2600 A7V8X gold 80...

After having this motherboard for about 6 months, the On board LAN started to crap out. Had to replace it with an ol trusty Linksys 100 NIC. I had to replace my sound with an Audigy 2 almost 3 months prior due to lousy playback and distortion cropping up....Placed the Audigy in slot 3... The...

I am trying to install Server 2003 on my P2L97-DS with 2 PII/300's. The computer is detected as MPS Multiprocessor but task manager and system info show it has only 1 CPU. (I've never seen this before! If it knows it is multiprocessor, why doesn't it see the CPU????) I tried updating the...

For those who have the joy (or pain) of owning the A7M266 I have a question... The +-5 V on this mobo has been operating fine, but now it is continually dipping down into the approx 4.5 V range. Is this correct or is the mobo or P/S going bad? Anyone that can provide insights I'd appreciate your...

Says it almost all... What BIOS ?

Hello, I have a big problem with one pc of my company, yesterday i tried to update the bios of my P4G8X deluxe MotherBoard with Aflash.exe found on Asus web's site (66 ko) and bios revision 1006 (the latest). - I saved the old one on a floppy. - after i flashed the new bios, but i had an error...

In article , "MacArthur" wrote: What is the fastest CPU compatible with ASUS TUSL-C? TIA http://www.asus.com.tw/support/cpusupport/cpusupport.aspx Paul

I am using a P4T-E mobo. Can somone suggest the best PCI/Card configurations? I have the following cards. 1-Creative Soundblaster Audigy 2-Promise TX2 100 EIDE Controller 3-SMC Ethernet Card 4-Adaptec USB 2.0 Card 5-ASUS V7100 AGP Video Card

Howdy, The hardware monitor was halting the POST because the +3.3v has moved up to +3.9v. I switched that to ignore in the power setup and it POSTs fine. Now I've been running the Asus probe software constantly and I'm noticing spikes in other voltages. Most noteable the -12v will spike to...

I just got DSL and was wondering on my A7N8X Deluxe board if I had my NIC card set right Duplex-Auto select, boot PROM enabled, media type - auto select. Sorry for the newbie question.. Thanks for the help

Why doesn't my new motherboard "ASUS P4BGL-MX" recognize my Intel P4 2.4 GHz ? When powered the first time, the motherboard sets the speed to the lowest option : 1.2 GHz And then it enters the SETUP to let the user alter CPU according to the CPU he installs. I installed a Intel P4 2.4 GHz CPU The...