Since June 15th, I have been testing XP Pro on this setup and have not been able to get it to play video and audio off the Adobe Premiere Pro 1.5 timeline without stuttering. The audio drops out. I sit this evening, struggling in vain to sync a separately-recorded audio track to one video track,...

BAD BIOS CHIP FLASH? VISIT: http://bioschips.nlan.org For Replacement chips $15 re-flash of existing chip $8

BAD BIOS CHIP FLASH? VISIT: http://bioschips.afraid.org For Replacement chips $15 re-flash of existing chip $8

Hi I have a REV1 8KNXP Bios F10 and running XP Pro SP1 plus all the other patches. In my device manager under USB controllers I have 5 controllers listed but only one as a USB 2. I was wondering should all the USB controllers be USB 2 ? regards Denis

I have a GA 8KNXP Rev 2.0 board and I noticed the other day that there are settings in the BIOS to enable/disable RAID. Seeing as I don't use it, I was wondering, if I disabled both the Giga Raid and the SATA Raid, would this stop them appearing in the boot screens thus making the start-up...

I can not get the IDE 2 connector to work properly. I had planned to have IDE 1 connected to DVD rom, and IDE 2 to a Maxtor 250gb PATA drive, and boot off of the SATA using a Raptor 74gb drive. Well first I installed using IDE 1 to DVD and the Raptor to SATA 0. Installed fine, then I attached...

Hello all After going from BIOS F6 to F10 (didn't try F7 to F9) Windows XP doesn't recognize the AC97 sound device. Enabling/disabling it in BIOS doesn't make any change. I have two Windows XP (PRO SP1) installations on the machine and it is the same on both. It's like the hardware just...

Neither of the News Groups you posted to are apropos to DOS scripting. Please post On Topic matter ! Dave "Jim B" wrote in message ...

Hi, I have a 2500+ Barton at stock settings on a Gigabyte GA 7VT880 Motherboard. The problem is, I don't know if my CPU is running too hot because I don't know what the exact load temperature is. With Prime 95 the highest temperature reported by EasyTune4 (whose temperatures are the same of...

I have a GA7VAXP motherboard. Running XP pro. HD happily running on IDE channel 3 . I'm trying to add an extra HD to channel 4. (IDE 1&2 full with CD's etc). When I boot the raid BIOS recognises the drive, but XP doesn't. I can see it listed in Device Manager which tells me it is working. But...

I am trying to install Win XP on SATA 0 and when I go through win setup, no drives are shown to install on... I see drive in bios, but not after setup. I have tried loading drivers using F4 during setup, and several different bios configurations. What is the correct procedure?

Has anyone able to use this BIOS? It didn't allow changing of bus speed or any paremeters for that matter. I had to go back to F1

http://www.chaintech.de/PRODUCTI/mainboar/socket7/5SSV.htm

Is it normal for the motherboard to read higher than the cpu. At the moment the motherboard reads 32C and the Cpu 26C This does not seem right to me. This is in Everest info but it is the same in Bios when read there, motherboard temp higher than CPU. The other thing has anyone managed to run a...

At the moment I have a P4 2.53MHz (533 FSB) and 1 GB of PC 2700 memory installed on my GA 8KNXP Rev 2.0 mobo. I've been toying with the idea of upgrading the CPU to a P4 3.0MHz (800 FSB) and the memory to 1 GB of PC 3200 to match the motherboards capabilities. What I wanted to know is, will I see a...

I have a new GA-8S655TX Ultra Motherboard and the CPU (P4 2.8 Prescott) Fan speed is showing in the low 2000 region. The Manual states around 4000+ in their example. Everytime the screen changes I can hear the Fan (very noisy) change speed. Should I be worried? It is the standard fan that came...

MB: GA-7VAXP Rev 1.0 CPU: AMD Barton 2500+ Clock Ratio DIP Switch Setting: Default (auto) System Bus Frequency DIP switch setting: 100Mhz (won't post at any other speed) System will post, but shows a 1100 Mhz CPU, and shows very erratic temperature readings, from normal to 225f! Doesn't say at...

"Russell" wrote... Is your onboard sound enabled in your BIOS? Also, the revision 2 board has a newer 658 soundchip instead of the 655 chip on the revision 1 board. You might be forced to do a repair install of Windows XP since you do have a new motherboard and BIOS. Yep, onboard sound...

My card has the latest BIOS I've tried the current drivers, the "beta" drivers (which are older) and the version before that. My next step is to remove the Promise card and see if it'll take directly to IDE0... "Tim" wrote in message ...

I can get Windows 2000 Advanced Server and Windows XP to install just fine. Windows 2003 (different versions, different media, etc) always hangs during the device installation phase. My set up is: 2xPIII 800 1024 MB RAM (Kingston 256MBx4/PC133) ATI Radeon 7500 Promise SX4000 RAID Card (RAID1 for...