Hi there, I should know this but need to check, can I run a Pioneer A06 off a SATA to IDE dongle, but is there a restriction on the speed the Pioneer will burn? Could I also run a Hard Drive caddy off a SATA to IDE dongle? Many thanks for any pointers, Tim.

Hi ! I replaced my MB with an A7V600 a few months ago. After that the machine locked up at regularly. I traced it down to low voltage on the 3.3V line. The problem was actually easily fixed by unplugging the main power connector to the board, giving it a quick clean and reconnecting...

I have an A7V333 Rev 1.04 board with 1017 bios. Just installed a mobile XP2600+ (266fsb) and highest multiplier available is 12.5. I thought higher multiplier settings were available in this bios? I'm running jumper free mode. Do I have to raise fsb to adjust cpu freq? Have I missed a critical bios...

Anyone selling a CUSL2 here in UK?

I am planning to build a system with the K8VSE Deluxe motherboard and a AMD 64 3200+ Retail processor. I want to use 2 - Western Digital 120G SATA in a Raid 0 configuration and a Western Digital 120G SATA as another source for data. I will also be using 2 - 256Meg PC3200 and 1 - 512 PC3200 for 1...

Hi all, According to the Asus, the P4P800 has a new BIOS as of 13/5/04. Below on the top right. http://www.asus.com.tw/support/support.aspx Has anyone managed to find it? It has the info on the Asus site, but

Hi all, According to the Asus site, the P4P800 has a new BIOS as of 13/5/04. Below top right. http://www.asus.com.tw/support/support.aspx Has anyone managed to find it? It has the info on the Asus site, but

Hi there, Not sure if this issue is connected to the Audigy but since doing a format and clean install of XP and then installing the Audigy there seems to be a problem with the Local Area Connection Status icon not appearing in the task bar unless I go into Control Panel and double clicking on...

I have a new P4P800VM w/ a P4 3.2 Ghz. The retail Intel CPU cooling fan is so loud that it sounds like a lawnmower.. So I'm thinking I'll try a quieter aftermarket CPU cooler. Will a Zalman CNP7000-Cu fit on my P4P800VM?? Any help appreciated.

I have the following config: a7n8x deluxe 2.0 bios 1005 uber windows xp sp1a (with latest hotfixes) Microsoft optical wireless mouse/keyboard. My system runs fine but when I reboot the mouse will lock up and freeze - keyboard still works. A shutdown does not have the same effect.

I need to do a RIS installation on a few K8V's but I ran into problems: All GUIDs, which should be unique, are factory set to"00020003-00004-0005-000600070008". GUIDs set with MAC addresses, don't work. Also, after terminating installation, PXE boot is disabled and it can't be resetted in...

can someone tell me where to go to find out how to overclock this thing? I have an a7n8x rev2.0 and everytime i adjust the fsb or multiplier at all it just locks up on reboot...so i know i am doing something wrong.... Jeff

After much investigation I have discovered that having USB products, like a mouse and webcam, plugged in while my PC boots, causes my P4P800 Deluxe to beep a few times during boot up. Is this normal / ok ? It beeps once for each USB device plugged in.

i have recently bought a mobile 2400+ for my A7V266-E, put it in and low and behold it keeps the multi at 6 not allowing me to go any higher without stability issues, this keeps me stuck at 800mhz instead of 1800mhz. i have bios version 1015 beta 03 and still no support. I am sure that some of u...

I had posted my floppy problem in several places and everybody pretty much had the same thing to say that I needed the older 3 connector cable. What they didn't realize was that in my post I had stated that I was having a problem with the bios, I had already physically plugged it in. I have been in...

Hello, i'm trying to install Win 2003 Server Standard on my Computer. There are 2 HD connected to the Fasttrak onboard raid-controller, running in raid 0. Although i press F6 during setup to install the promise driver V 2.00.0.34, setup aborts because no harddrives are recognized. did someone...

Follow-up set to alt.comp.hardware and alt.comp.periphs.mainboard.asus. On Thu, 20 May 2004 00:31:30 +0100, "Richard Dower" wrote: "DaveW" wrote in message news:ihRqc.80821$iF6.6868366@attbi_s02... Antec, according to Tom's Hardware Guide, very...

Anyone having strange problems with Mushkin memory on this board. I'm getting occasional "Can't read memory at location whatever". Mushkin said to up the voltage to 2.75 which has made it a little better but it still happens at least a few time a day. I also have an ASUS board at work that NEVER...

If you go to the Asus site all the info is there. "Mike" wrote in message ... Hi, Anybody who has the Asus "A9600 XT/TVD" or "A9600 XT/TD". What's the difference between the TVD and TD model by the way?! What I would like to know...

Hello I am very interested in trying an Asus motherboard and am needing a little help. I need to be able to use the 754 pin Athlon 64 cpu and need to be able to have a floppy controller, Ide and serial ata and be able to use my ATI 9700 pro video card.These are the main things I need, other...