similar problem here.. brand new all components.. took out all ide channels. turn it on, motherboard light comes on, fan spins.. but nothing else.. no POST sequence.. tried it without RAM (one stick of ddr333 512) and still same thing. checked all jumpers, all fine.. interesting thing is that the...

I have a 9800 Pro 128 meg card and it works perfect and wonder if the 256 meg version will also work with my A7N8X deluxe? Also, is the "Sapphire ATI" brand an OK product? Thanks. -- ..

Is there a reason you want to forego the use of IDE altogether? I would think that having your CD-RW on the IDE controller separate from the SATA controller would provide performance superior to that of adding an IDE device as a slave on an SATA controller, is that an incorrect...

I put an old 486 fan on top of mine, i have found the southbridge needs a small passive heatsink on it (memory coolers are ideal) as for changing it completely i dont see why not, the cooler you keep it the stabler the system will be ;-) Cooling memory also helps alot. Duke Satan "Shap"...

I was looking at the specs for the A7N266-VM/AA (actually it was for the A7N266-VM which said PCI 1.1) on Asus' website. I couldn't find a spec sheet for the A7N266-VM/AA. But anyways, can anyone tell me if the A7N266-VM/AA is PCI 1.1 or 2.2 compliant? Most of the other Asus socket A boards I...

Hi guys, I have an Asus CUSL2 motherboard and a 80GB HDD, and am thinking of getting a 120GB HDD as a 2nd drive in the system, first of all does anyone know if the CUSL2 will take 200GB of storage altogether (or 120GB in 1 channel)? And what make do I go for? I've heard that IBM's 180GXP is a...

Ben Pope wrote: S.Heenan wrote: Mark Walton wrote: but I can't get in to bios yet to change anything! Enable "Halt on No Errors" and disable Post Reporter. Chances are good this error is incorect and your RAM is fine. The A7N8X series is buggy in this regard. Might wanna...

I am running a p4 3.06 on an asus p4pe board. I have a drive on the raid controller and the serial port 1 running raid 0. On the primary controller I have two drives. A DVD is on the secondary controller. I am trying to find out what drivers should be installed in Win 2K for the IDE...

John wrote in message ... John, Off topic but is your Sonata case much quieter than other cases? Looks like a wonderful case! JG John Smith wrote:

In article , Mark_Venture wrote: Hi, About two months ago, I upgraded my primary PC from my trusty old Abit BX6r2 board with P3-700Mhz (100fsb), 512Meg(pc100) ram, etc.. To an Asus P4PE/Lan/1394/Sata board with...

Well I have made my purchase, and the winner is... Asus A7N8X Deluxe ver2.00 for $119. I want to thank all of you for your input. I greatly appreciate all the insight I took from your responses. "Shap" wrote in message ...

"rstlne" wrote in message ... You have to remove the battery on Asus motherboards to clear the CMOS (as per the manual) otherwise there is a real chance of blowing a diode on the board (I know this from personal...

Thanks for the assistance. Hopefully, I'll get to a point that I can provide answers as well. The Cybrow wrote in message ... On 21 Jun 2003 21:29:10 -0700, (searcher99) wrote: There are references to...

Anders Frostad Pedersen schrieb: I've got an asus A7M266-D board for amd MP processors. The board had been running fine for about a year, when after upgrading the cpu fans things went bad. What happens is that the pc stays powered on for about 3-4 seconds, then just turn itself off,...

Mark_Venture typed: So, what do you think? Why not giving AMD a chance and upgrading your second system with a shiny A7N8X with an Athlon XP 2800+? I am sure you won't regret this decision. Bye. --

"Craig Matchan" wrote in message ... Eddwnn, make sure you have your drive are cables orientated the right way. If you have your cables reversed then the system won't detect the drives. Typical side...

Much appreciated, Ed! "Edgar Verhagen" wrote in message ... On Sun, 22 Jun 2003 08:38:35 GMT, "stevensly" wrote: Hi all, I just installed a p4c800d and noticed that when the system check...

Thanks, I'll try that. "Paul" wrote in message ... Did you happen to change the JP1 or JP2 jumpers? These are the so-called undocumented memory voltage jumpers. I recall some people on this NG stating ...

Thanks, but that was the first thing I tried, with the latest version as well as that one on the CD, still no joy. But thanks for the suggestion. Koop "flaco337" wrote in message ... "Jeff Fish" wrote in...

Aw, I don't know about that. I have three systems with P3 850mhz IWill sloket, 512mb ECC memory each- w/ Win 98se. The motherboard is Asus P2bf, in all three. Two of the thee are purchases from EBay. Get a P3bf off of EBay for a few bucks. You'd move all your peripherals and the hard drive...