This probably won't be an easy one so i'll accept all suggestions. I've got an old school dot matrix printer, (oki microline 393) it works great with the exception of when it prints the letter q, or more appropraitely doesn't print it. it seems to print the letter 'O' in stead of the letter 'Q',...

Hi, can anyone help. I have a Samsung ML-2150 printer which is now causing me some problems. When it runs to print, there is a sound like growling noisy gears coming from the right hand side of the printer. It prints fine using one sided printing but when I try to use the duplex option the paper...

All, I've got a bit of a strange problem with a LJ2300 which seems to have developed a fetish for Transparency through the manual feed tray... Basics first :- Win 2k3 SBS server. Win XP clients. PCL6 driver downloaded from HP's website this am. v60.5.103.42 Printer settings reset to factory...

Hello all, I've recently bought a new Canon BJC 2100C and am having a strange problem when printing plain black text - the first half-page or so comes out as blue and then gradually goes to black. I've replaced both the colour and black cartridges, but no difference. Any ideas? Adrian

I require to remove the duplex unit in my Samsung ML2150. Has anyone had one apart and could give me any tips to avoid disaster. Regards Adrian

Hello! Is someone using that device? Isn't exploitation too expensive? Maybe someone is using it under Linux? Is it cooperating good? Thanx from advance! Adrian

Hello, I'm posting this for a friend as his PC seems to be dead. His system is an Athlon XP2000+ with a Gigabyte GA-7VA mobo, running Redhat 8 I think. Anyway, he bought a Canon BJC-2100 printer the other day and connected it with a parallel cable - machine refused to boot, not even POST although...

Are Epson printers compatibile with Linux? I'd like to buy one, but I'm not sure if it would work correctly Adrian

Hello all, I've recently bought a new Canon BJC 2100C and am having a strange problem when printing plain black text - the first half-page or so comes out as blue and then gradually goes to black. I've replaced both the colour and black cartridges, but no difference. Any ideas? Adrian

HI All Can anybody please help me with this problem before the printer goes out of the window !? I have a Panasonic KX-P6500 - which I would like to talk to my main pc - WinXP (sp2). The supplied drivers only go up to win98 / xp - so I've trawled the web and found several downloads - none of...

HI all Up to now I've used Jettec carts in my Epson C84. I was recently supplied with some Phoenix brand cartridges - never seen these before and wondered if anybody else had experiences of them? Thanks Adrian

Hi All I'm having a small problem with my Epson C84. One of the cyan nozzles seems to be blocked - reulting in thin horizontal magenta 'stripes' across solid 'blue sky' areas in printed photos. I've gone through the 'print nozzle check / run cleaning cycle' thing three times so far - and, although...

Hi group, I need a new printer, black / colrs / fax / scan and so on. I found the HP officejet 6310 that seems to be a real cool toy, but...the ink cartridge is only 11ml so they need substitution much too often. Now I have a offiicejet G85 that have 42ml and that should be minimum. So, any...

Hi, I have an Optra E312 printer for home use. Up until the last few months it has behaved well, economical to run etc. Lately however it has been sucking in multiple sheets nearly every time it tries to print a page. Anything up to around 10 or so sheets. Above about 6 sheets it jams - from...

Yes you are good in reading Croatian Braille Here is one more print done by HP Deskjet 930 http://adriatix.hr/A_PROIZVODI/A_BRAILLE_Print/PICT/A_Bralie_T_2_LL.jpg "Rui Sá" wrote in message ... On Thu, 6 Mar 2014 20:43:32...

Does some one knew how to get in Service Mode at Canon iX 6650 and print status page Procedure Press Power + Resume and 2* Resume and 1* Resume after that does not work for me Thamks

Have you seen something like this ? Before fix http://adriatix.hr/A_USLUGA/A_usluga_SERVIS/A_usluga_ser_INKJET/Serv_P_Head/PICT/SP_5000_1_XL.jpg After fix http://adriatix.hr/A_USLUGA/A_usluga_SERVIS/A_usluga_ser_INKJET/Serv_P_Head/PICT/SP_5000_3_LL.jpg

What can you say about this print out? http://adriatix.hr/A_REF/Pict/HP_3420_36K_L.jpg I can only say that this user has probably contribute cca 100 *$18.00 to HP budget or $150 in Adriatix's.

is CHIP- ed! want a proof ? Here it is http://adriatix.hr/A_NOVOSTI/A_novo_INK_ink/Canon%20iP%204200.htm --

Just in case if someone is interestid at Tactile Graphic printers. Take a look at this inexpensive option http://adriatix.hr/A_PROIZVODI/A_BRAILLE_Print/A_Tactile%20_Print.htm