Hello, I'm looking for a good quiet CPU heatsink for the above motherboard, I have the Intel E8500 CPU. I have seen some heatsinks such as Thermalright Ultra 120 eXtreme but they want me to remove the crazy cooling heatpipes to fit it in. Does anyone know of another heatsink that is at...

I need to power up about 9 or 10 hard drives in a tower case. Both regular ide (molex) and sata. I could probably get by with about 500W or above. I've been using Antec Neo-series power supplies, but have had some trouble with connector reliability. Which manufacturer's supplies would be most...

GA 7VT600 1394 Can someone tell me if this is the correct sensor for the case temp-sis950/ITE8705F 1? I believe this is the one for the CPU but not sure about the other, sis950/ITE8705F 3diode. There is another sensor, sis950/ITE8705F 2, which reports 28C. This is more in line with what a...

:cry: I recently purchased this "GA-7VT600 1394" KT600 Chipset Motherboard board from NEWEGG for a customer and installed all of the components with no problem. I tested the unit for 2 days before delivering it and everything was fine. After approx. 2 weeks I got a call from the customer stating...

sent to:

hello, Two weeks ago, I put together a new system using the subject board with a single WD2500JD SATA 250 GB drive attached to the Nvidia SATA header (yellow). System: GA-k8N ultra-9 AMD 939 4000+ San Diego (single core) 1.0 GB Ocz RAM PC3200

Hi. Not sure if this is a motherboard, OS, or hard drive problem, but I've tried a few message boards with no luck. I am trying to add a new hard drive to an existing RAID setup. I don't want this to be part of the array I already have...I just want to have some more space without re-installing...

Dilemma time. Mainboard has header for S/PDIF cable. No cable comes with mainboard. Manual says to contact retailer to order one. I contact retailer. Retailer doesn't respond to simple question: do you carry said cable and what is its price. Each reply gets stranger and stranger. Repeatedly I am...

Hello, Has anyone tried using an Intel QX6800 processor with the GA-P35-DQ6 motherboard? I just installed it with an ATI HD2900XT graphics card and it won't POST. No beeps either. The case fans and graphics card fan spin. The CPU fan (Thermaltake V1) gives just a small jerk (as it trying...

Am I alone with this problem? When XP Pro (with SP1 slipstreamed) is installed, the PC powers down just fine, always has. When XP Pro with SP2 slipstreamed is installed the PC will not power down, it goes to a black screen and the only way to shut it off is to hold the power button in. In this...

Hi. Does anybody know what is the warranty period on the Gigabyte motherboards? I bought a 7VTX mainboard (from NewEgg) in july 2001 and wonder if the Gigabyte warranty could still be valid? Thanks in advance.

I just built a system with a GA-7N400 Pro2 board, Athlon XP 2400, 512 RAM, 2 40gig hard drives, 1 DVD-ROM drive, and 1 CD-RW drive. I am running the GigaRAID controller in ATA mode. 1st hard drive is connected to IDE 1 running Windows XP. DVD-ROM drive and CD-RW are connected to IDE 2. 2nd hard...

I'm considering building a new system around the Asus P4C800 E Deluxe but with so many different types of RAM around I'm a bit confused. What is the most fastest and stable memory I can use in this board to give me at least 1G of RAM, and do I need one 1024MB stick or two 512MB sticks? Below...

William Smyth wrote: hi all hi how can you tell ver No you have for the ga 8knxp v1.00/v2.00 topic already discussed here. http://groups.google.it/groups?hl=it&lr=&ie=UTF-8&oe=UTF-8&selm=re1ipv4g0rjntvl01kg9ljkpb86sa2k681%404ax.com

I'm running a p4 2.8ghz on a GA-8IK1100 (875P) m/board. Easytune 4 reports temps of 50 degrees idle in win xp. Is this an acceptable temperature? My cpu fan is a cooler master DI4-7I52A (Easy tune 2960rpm). I have two 12cm IN/OUT fans (both at 2500rp) and another outlet fan which sits along a...

I checked my 8KNXP, DDR voltage is at 2.75. It's set in the BIOS to +.2 so i guess it's about right Steve

Will the Zalman CNPS7000A-CU CPU Cooler work with this board? Thanx

wrote: Hello, I have used the 7dxr with a 1GHz Athlon which I have now upgraded to an Athlon 2600 (266 fsb), which is the faster cpu this mobo will take. To use the 2600, you need to have the F10 bios. I have flashed this, but when I boot, I sometimes see that it is...

I am thinking of upgrading the graphics card on my GA-7IXE4 m/b from a GeForce MX2 ( 32Mbts ) RAM to one of the 128 Mbts /256 Mbts graphics cards due to pressure from my grandson now that DOOM 3 is out ! However I suspect that this will fail to improve the performance of my PC due to the age of...

"fabien" wrote in message ... Howdy all: Is anyone running one of the subject boards? I am trying to decide which way to go - either Pentium or AMD. INTEL!!!!