I recently built a new machine with a Gigabyte GA-M770-DS3 board. It is running XP and was stable for a week or so but now has major problems and I am not sure where else to look for the problem. I need to make sure that I find it soon before the Newegg return policy runs out. Any suggestions would...

"Karen Parker" wrote in message ... Seems that Gigabyte does not support it users at all. The best support I have had was from ASUS.

Hi: I want to install two SATA drives in a RAID 0 configuration to my GA-8KNXP Revision 1 motherboard. I also will have a 80GB as a master and a DVD ROM as slave on IDE 1and a DVD R/W as master on IDE 2. My questions a 1. Which SATA connector should I use, the ICH5R or the Sil3112 and why?

I hope someone will be able to help me get the most out of my system. I know a little bit, but I am not really into tuning. I just want it to work... A brief history. I bought the system from a local computer store about 1.5 years ago. It had an AMD Athalon XP 2700+ CPU and 512 MB of...

ravxm wrote: I bought the X-Fi XtremeGamer sound card today thinking that my other sound card didn't work (I was having the same problem with my other card). Windows doesn't detect the new sound card and neither does the Creative Setup Program. I disabled the AC97 onboard sound through...

I've seen two different versions of this board. One has a fan on the Nvidia chip and the other has a larger heat sink w/o a fan. Is there any other diffence between the two boards? Which is better? Is this and indication of a ver 1 or ver 2 motherboard? Thanks.

http://global.giga-byte.com/MotherBoard/Products/Products_GA-8I915P%20Duo%20Pro.htm The link above is my GA-8I915P Duo Pro Motherboard and you can look at the manual after I explain my problem. First off, I know for a fact that my cables are connected correctly, jumpers are set right and the...

Guys who have made these two to work with the onboard controller(sil3112) please let me know what you did and your computer configuration/synthesis. The seagate drive is ST3120026AS and its date 7/11/2003. It works perfectly with a PCI sil3112 controller but has problems in reading data with the...

I have build PC for my friend. The mainboard is GA-7N400E with newest bios available on the Gigabyte web site (F5). OS is Win XP Pro with all the up to date service packs and critical updates. Everything works just fine except one issue: I have attached 2 fans - cpu fan (obviously) and system fan,...

I have a gigabyte ga-8ipe1000 m/b P4 2.6 Overclocked to 3ghz. Can some please comment her inconsistcies between the BIOS setup monitored values and those shown by EasyTune 4 and other utilities in Windows. (I have turned things up for overclocking) .. BIOS setting for CPU core volts 1.6 volts...

I hear that the phenom chips will work with most am2 boards.. Does this include the GA-M55SLI-S4.. I can't find anything on it.. Thanks

I know its an old mobo, but its in a spare sys. perfectly OK for internet and my wifes card games! Runs fine on Duran 850 but any attempt to run a Duran 1300 results in a cpu overheat warning/shutdown, despite using correct cooler/fan Bios F8, drivers updated. Any clues, guidence? thanks

Normal use seems to average 50 celsius. When I run my ATI screen saver it jumps into the 60's. Also the fan runs louder and louder as the load increases. Should I reseat my CPU with new heat sync? I am currently using silver heatsync. It has been running ok since I built it (3 months or so).

how do I find out what needs upgrading, I went to the gigabyte site, and chose the MOBO to update, hit search, nothing. I am having a problem with my machine, I have p4 2.5, 1024 DDR RAM, 2 hard drives, one is SATA for data, with XP, and I use my machine to make music. When I run some music...

Yes I have one and no sound problems, but my PCI modems can't connect to my ISP. Both modems work fine elsewhere. I'm about to uninstall TCP/IP as the very last thing I'll bother with. Anyway.... back to your problem. Triple check the pin settings on your sound. I initially had all my sound for...

Hi all Got a quick question about outputting through the spdif socket into my 5.1 amp. I've got it all hooked up, but I can't get any sound from the rear speakers unless I'm playing a dedicated 5.1 source through say Power DVD. Also I can't get any sound when I use my TV card (Hauppauge WinTV...

I bought new 2 LITE ON DVD Burner IDE but IDE Cable unable to reach IDE slot on mobo too far on left side. I had talk with men and only way to get rid LITE ON IDE for DVD for SATA. Only I can find is LITEON SATA. I order 2 LITE ON DVD SATA. I move my new LITE ON IDE intomolder PC. No loss...

Dear All, I have the strangest problem with my new motherboard (a 8i915P Duo Pro). I would like to use the 3 IDE slots of this machine, or at least 2 of them. I've installed a Linux Fedora Core 3 on IDE1 (either Master or Slave, with the other device being a CDROM). Linux boots fine but it...

Subject says it all. (This board lets you combine ANY 2 PCI-Express x16 graphics cards) -- Grumps

Hi group Recently I started seeing less and less of the boot sequence and now the screen just stays blank until Windows XP comes up. I have read some posts which suggest this might be quite common when using the DVI out to my flat panel screen (especially Dell computers?). Any suggestions? I did...