Hi all, I'v bought a GA-N650sli-DS4 and I intend to use watercooling with this setup. I've got a chipset waterblock to replace the huge northbridge heatsink next to the cpu which, several reviewers claimed, would depend on the cpu fan to be effective. I am not sure about the mosfets though that...

Is this board still available? I only saw one store in Froogle.com and it's OOS there. -- - Zilla Cary, NC USA (Remove XSPAM)

Hi All I'm just Thinking about putting my DVD Writer and spare CDWriter on the Raid Connectors on the Mother Board. and Removing My Raid Drives to Normal ATA Question is, Would the DVD Writer and Cd player work okay on the Raid connectors I feel the units would run better if all were installed as...

I downloaded the SuSE Linux 9.2 DVD iso image and burned it to DVD. This is the first time I've ever burned an iso image to a DVD, so I never had a reason/need to boot from the DVD drive before....good thing I didn't, because I can't! I checked my BIOS (Award 6.00PG with GIGABYTE GA-8IDML F5a...

My two 512 MB sticks of Corsair memory don't work on this mobo at 200 MHz. BIOS shows 166 MHz. When I use a single stick I get the full speed. I cannot set the speed in the BIOS, since the clock speed for DDRAM is grayed out. When I set it via EazyTune it does not keep that value. How can I set...

Getting ready to pick up a GIGABYTE GA-K8NSNXP-939 Supported CPU: AMD Athlon64 Processors Chipset: nVIDIA nForce3 Ultra RAM: 4x DIMM for Dual-Channel DDR400/333/266 Max 4GB Which of the to memory choices below would you recommend I use It was recommended by a friend i use the OCZ

Hi all, Thinking about getting a second Ledtek GT6600GT and was just wondering what kind of experience people on this forum are having with their SLI setups? Also is it possible to still use all the USB brackets with a second GPU - this looks like it may pose some problems as far as cabling from...

I have an 8I915P Dua Pro, and I'm trying to debug a problem w/ Flight Sim 2004 by disabling the onboard sound card and using an older sound card that I know works. Thing is, I can't find any option anywhere to disable the onboard sound. Been through BIOS thoroughly, looked through the jumper...

A driver section has been added, does anyone know what it means by Windows XP 64bit?....does this mean it is not intended for Windows XP Professional SP2? http://www.giga-byte.com/Motherboard/Support/Driver/Driver_GA-K8NXP-SLI.htm

I'm setting up a system for friend who has two 160GB SATA Western Digital drives on a GA-K8N Ultra SLI mobo's NV SATA 0 and 1 conenctors, which BIOS seems to show as being "IDE" (Weird). Anyway, I'm installing off of a pre SP1 copy of XP, and need to know where on the GB driver CD the Nvidia SATA...

I noticed that my system clock was reported as 1742 instead of the 1733 it should be. I decided to see if maybe I had inadvertently selected top performance. I looked and top performance was off so I decided to turn it on to see if it would change anything. It did. So I turned off by loading...

Hi just wondering if anyone has this motherboard 8I945P-G. I just updated the bios using the @bios utill on the mobo driver disk. It tells me that all went well and that I need to reboot my machine for it to take effect! That’s where it all went pear shaped. When I restarted there's no vga nothing...

The manual for this board documents a setting in BIOS where I can set the memory speed multiplier as follows: main menufrequency/voltage control"memory Frequency for" manual shows 4 settings for FSB = 800 Mhz: 2.0, 1.6, 1.33, auto But when I go into BIOS it shows only 2.0 and auto. I must run...

I have had the above motherboard for the last year or so and I must say its the best board I have ever owned. I have certainly kept it the longest without upgrading. I am purchasing a 3.06 pent 4 533 MHz HT CPU. I have upgraded to latest Bios which is said to support HT Technology. I don't have the...

http://home.iprimus.com.au/harveynaaa/Downloads/BIOS/k8nxpsli_f7p.exe

Hi, I have the following config on my GA-8KNXP (rev. 2): IDE 1 - HDD 1 + HDD 2 IDE 2 - DVD-RW + DVD-Rom I would like to know if it is possible to add a new hdd to IDE3/4 and/or to the SATA slots without RAID config, so just as extra hdd ?? I do not want to change the config as it is now if...

The promise udma66 controller on the 6BX7+ can be modded to support raid. I'm just wondering if anyone has done this and if there is a modded bios out there I can use. Regards, Adrian.

Hi all... These are the 2 motherboards I'm considering for a new system. The Gigabyte is A$90 more than the Asus. What are your thoughts on these boards? Specifically, is the Gigabyte worth the extra $$$?? Stupot

Hi, I've got a GA-7VAXP which I bought back in February. It was shipped with BIOS ver. F10, which was fine. Except a couple of weeks ago I bought a USB 2 external hard disk which wouldn't work except as a USB 1 device. So I re-flashed it to BIOS ver. F14, and the disk works fine as USB 2.

I recently moved to Xp from Me and I thought it was possible to update the Xp SCSI driver to that on Promise webpage; but I found promise says to do this updating only before installing XP. I have 2 questions: 1) is ter any other way to do this? 2) now in Control Panel - SCSI I have "controller...