Hi all, I'v bought a GA-N650sli-DS4 and I intend to use watercooling with this setup. I've got a chipset waterblock to replace the huge northbridge heatsink next to the cpu which, several reviewers claimed, would depend on the cpu fan to be effective. I am not sure about the mosfets though that...

smurfomatic Wrote: "Reckless" wrote in message ...- Hello, "Richard Dower" wrote in message ...- I have the 8INXP and if memory serves there...

Hi, Anyone else had crazy temp readings with EasyTune5? The old version 4 works ok, but I wanted to try the new one. I use a 7VT600-RZ mobo, maybe it's not compatible with new EasyTune? Does anyone know? Example problem is system temp reading 90c (instead of 33)!

There's an option in bios for robust graphics booster and you can set it to auto, fast or turbo. Did anyone try playing with this, is there any diference ?

When I got this mobo it originally came with BIOS F6 and everything seemed to work fine but when I upgraded to either F8 or F9b I ran into numerous problems. #1 the CMOs setting keeps resetting. If my CPU was overclocked, sometimes it'd revert to default speed and once it claimed I had 2.0GHz P4...

"Skybuck Flying" I am probably going to set the pc on the ground so a build in front end panel is unhandy for me, the rack is much more handy and nice since it can be placed on the desk providing easy access to all the nice rotary controls =D I suggest you put the pc on a small stand...

I have a system with a GA-6BA motherboard in it. I recently put Windows XP on the system and since then there have been some system crashes when using a dialup connection to the internet. The system will work fine when not connected to the internet and for varying amounts of time when connected...

I need to know the diagnostic beep resulsts for the mobo. It's issuing 1 long + 3 short beeps on boot up. The manual doesn't have a section on this. Can anyone help? DebB

I have found that some people have had success using third party programs, mainly ClockGen, to overclock their GA-K8N Pro SLI. In ClockGen, for me, I went into the BIOS first and set the CPU down to x6 and the memory down to 100 speed. Boot into Windows and run Clockgen and it freezes if I try to...

Hi All I have a 81G1000 motherboard and have used up all my IDE spots - 2 x HDs ( 1 x 120 gig 1x 180 gig) and 2 x DVD Writers - and I need more HD space for video editing 1. Can I fit SATA drives now, as well as all those IDE devices? 2. Is it better for me to buy a PCI card that will give me...

I am looking at purchasing a PC with this Gigabyte MB for use with AMD 288+ CPU and 512 DDR333 RAM. Any comments appreciated.

Somehow I can't get my GA8KNXP to recognize the Hitachi/Deskstar on IDE3. Is there something I am missing. Works fine on IDE1 and IDE2 Any advice Thanks

Hi Having problems with my GA-8IK1100. I start the PC up and everything goes fine then after about 3 or 4 minutes my mouse freezes and my keyboard refuses to work at the same time. Both these work fine on my old PC. I've rebooted with different BIOS settings and I get the "keyboard not present"...

Trying to set up with 3-sata drives. Had system working with 1 sata, and when I added the raid pair it fell apart - gets into a reboot loop. As anyone had success with this setup - or can someone suggest an approach. The documentation is less than illuminating - probably better than my Japanese...

Hi all, I installed winXP in my new 2500+ with GA-7N400, it runs very sweetly. Just with two problems though. When I do high speed transportation with lan (both ADSL or inhouse), I encounter some short pauses to the system occasionally, the whole computer got frozen for a second or so. What...

My two 512 MB sticks of Corsair memory don't work on this mobo at 200 MHz. BIOS shows 166 MHz. When I use a single stick I get the full speed. I cannot set the speed in the BIOS, since the clock speed for DDRAM is grayed out. When I set it via EazyTune it does not keep that value. How can I set...

BAD BIOS CHIP FLASH? VISIT: http://bioschips.nlan.org For Replacement chips $15 re-flash of existing chip $8

Sorry Jim, but you are the last known user of ET4 in the universe. Note that it won't be much use in later versions of Windows as the architecture of the program falls into the prohibited / useless set. - Tim "Jim Kent" wrote in...

BAD BIOS CHIP FLASH? VISIT: http://bioschips.nlan.org For Replacement chips $15 re-flash of existing chip $8

Hi: The latest official BIOS on the Gigabyte website says the GA-7DXR can go up to 2600+. Who out there has actually got a 2400+ or 2600+ to work on this board? Thanks. CSL