|
|
powerpack cabling by
STEAMMAN
I am building a p.c and have inserted some known connections from the
power pack to the motherboard, My questio, can connections from the
powerunit go to any like pin on the motherboard, as there are more than
one of each type of pin connector. I know the 4 pin power to the
drives, are all the...
|
|
1 |
288 |
|
|
connections from power pack by
STEAMMAN
Hi , I am building a pc and am a bit stumped with the connection ends
of the cabling inside the case.I have inserted some of the ones which I
know go where.
My question is, If there are more than one connection on the
motherboard which are alike, is it possible to connect any like cable
end...
|
|
0 |
263 |
|
|
Seagate STD6401Lw by
jellyman5264
Hi
I was able to get a used external Seagate 4mm tape drive (STD6401LW)
and I would appreciate some help with the configuration. I purchased
a used AHA 2940UW to work with the drive. The tape does back up, but
very slow and many soft write errors. Can one of you please tell me
the correct settings...
|
|
4 |
458 |
|
|
Faulty Motherboard or power supply (or both) by
kenmor
I built my machine about 2 and a half years ago based around a
Gigabyte GA-8S655FX-L motherboard (socket 478) with a P4 2.4 GHz
processor. I am not an experienced techie and I have no
sophisticated test equipment.
It went wrong a few weeks ago and having considered several
possibilities. I am...
|
June 15th 06 11:38 AM
by kenmor
|
9 |
477 |
|
|
|
|
8 |
379 |
|
|
Which do you think is better Price/Performance? by
Larry Roberts
Fixing to purchase an AMD Socket939 CPU for the system I've
been building. (I have a very limited budget, and it would be stupid
to scrap the mainboard, & memory for a Socket AM2. Too long to return
$85.00 mainboard, and $85.00 memory now) I see that the AMD 64 3800+
(2.4Ghz with 512KB L2) cost...
|
|
4 |
322 |
|
|
!!! CHIEFTEC CASE power button warning !!! by
Skybuck Flying
"Skybuck Flying" wrote in message news:...
Hello,
For some reason my card reader is not working.
I have been having some problems with the power button of this CHIEFTEC
case.
When I try to turn on the power button it sometimes hangs a bit and I
notice how the...
|
|
0 |
263 |
|
|
USB Switch by
[email protected]
Hi ,
I have an project where in i need to share a USB mass Storage Device
among two HOST PC's. The hosts would not use the Shared resource at the
same time. So I planned to use 4 SPDT Swithes to switch the Storage
device when ever required. When I did implemented this, I found that
the Mass Storage...
|
June 14th 06 04:02 AM
by Paul
|
2 |
271 |
|
|
MFM decoding by
Ed
Looking for some schematics of circuits that can decode MFM data stream to
binary.
Not looking for FDC chips.
Thanks.
|
June 14th 06 03:23 AM
by Ed
|
0 |
362 |
|
|
Upgrading a Compaq Presario 5000c by
jdk
Hello,
I have an old Compaq Presario 5000c which has a Duron 800 Mhz
processor and
128 MB of RAM. Is it feasible to upgrade this computer? I was thinking
of putting a
new economy motherboard in it,
(PC Chips (M810LMR-Ver7.0) Athlon/Duron/XP Ready SiS730S Chipset
w/Audio/Lan/Video UDMA-133 Micro...
|
|
4 |
333 |
|
|
Troubleshooting lost Hard Drive by
S. Robert Davidoff
I have an Intel D975XBX Board with 2 SE Hard Drives which are set in the IDE
mode, not RAID. My first HD has the OS and programs and Data and the second
acts strictly as a back-up. I recently noticed that I keep "Loosing" the
backup hard drive. If I shut down and restart, it comes back (at least...
|
June 14th 06 12:16 AM
by Dave
|
2 |
222 |
|
|
M/B damaged? by
[email protected]
Hi,
I have had my self-assembled PC running for almost a year now with no
problems. However yesterday I switched on and noticed vertical
artifacts on the screen during the boot sequence, which remained when I
got to the login screen in Windows XP. I rebooted a couple of times to
see if the problem...
|
|
7 |
489 |
|
|
need a PD/CD Rom drive to read panasonic LM-R650A PD Cartridge by
My_Story2002tr
Hello everybody,
Does anybody know where i can find a PD/CD Rom drive to read PANASONIC
LM-R650A PD Cartridge,
I have a project in this PD Cartridge but i can not read it.
where can i find a PD/CD ROM bearing the PD mark?
I live in Turkey, but i could not find it here.
Any help will be highly...
|
|
0 |
148 |
|
|
Dual core prices - Intel vs AMD by
Bishman
Looking at UK dual core prices Intel seem to be much cheaper than AMD ?
Novatech - http://www.novatech.co.uk/novatech/products/a561x1y0z1p0s0n0m0
Intel prices range from £85.67 to £318.41. AMD Seem to go from £199.50 to
£436.34 Traditionaly Intel were allways more expensive so why the...
|
|
7 |
682 |
|
|
Processor- Motherboard Issues by
jdk
I'm the guy who asked about upgrading the Compaq a few days ago.. The
reason I'm using it in the first place is that the computer I replaced
with the Presario, stopped working. Like an idiot, thinking that I
could test to see if it was the motherboard, I took the Athlon XP 2000
processor out of the...
|
June 13th 06 02:34 PM
by jdk
|
3 |
276 |
|
|
|
|
0 |
400 |
|
|
Computer keeps shutting down by
BH2
Hi,
My friends computer keeps shutting down when she tries to boot it up, what
happens is it starts to boot, but when it get to the windows screen it keeps
shutting down. The strange thing is if she leaves it alone after around
15-20 mins it boots up properly. I don't think it is a virus as it...
|
June 13th 06 04:59 AM
by mike
|
4 |
350 |
|
|
CPU-Z Can't Decide What My FSB Is... by
Agent_C
Check out these 2 screen captures, from the same instance of CPU-Z:
14: http://tinyurl.com/fbafb
16: http://tinyurl.com/eq2lv
The FSB keeps vacillating between 14 and 16 and the CPU speed gets
recomputed every time.
The BIOS clearly indicates a P4 3.2 w/HT and Soft Sandra indicates
|
|
8 |
554 |
|
|
Test Motherboard and powersupply without damaging the CPU? by
[email protected]
Recently, i received many motherboards & power supplys. Their
condition are unknown.
They may be bad.
I know that a bad motherbard could damage a CPU sometimes.
Is there any way to test an unknown motherboard without frying the CPU?
also, Is there any way to test an unknown power supply without...
|
|
2 |
311 |
|
|
uPCI card and PCI-X slot by
David
We have a server with 4 PCI-X slots and are looking to buy a fax card
for it. The card we found is uPCI (universal). Will the uPCI work in
a PCI-X slot?
Thanks.
|
June 12th 06 08:58 PM
by Paul
|
2 |
430 |