Hello, We need a stacking cable for our Alcatel 6024 managed switch. It is part of the 'Stacking Kit' Alcatel number OS-6024-STK. We are interested in either just the Stacking Cable, or the complete OS-6024-STK stacking kit (in usable condition).

Watch these closely. You may be pleasantly suprised. I won this auction: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5705621596&ssPageName=ADME:B:EOAB:US:6 what i ended up getting was: DL380 2 x 866 PIII's

Hola, Does anyone have the failover/redundancy software that is needed for use with 2 FCAL controllers, and RA4x00 chassis with 2 controllers? This does not seem to be something that is available from the HP site for DL... that, or I just dont know what im looking for. - thanks, LC

What have I done wrong? I've a proliant 5500 that seems to be a happy bunny, running SBS2k, twin CPU, plenty of RAM etc, and a Compaq RIB 56k part 294040-001. Becouse of the full length of the RIB, and with a 'handle' on the end, there is only one PCI slot it'll go in, BUT the smart start utility...

This worked for me – received a system that had been working fine and when I powered it up I had the same symptoms. Turned out something had worked loose during transit. Unplug every card you can - CPUs, CPU sleeper cards, main card, memory riser - everything you can, and reseat them all - hey...

Hi all, I have such a case: I have 150 compaq servers running RH Linux with installed Compaq agents. Is a server side software installed on w2k system which store information from other servers with Linux agents receive remotely ? Thx, FO

Hey Group, Can anyone give me the P/N for a 68pin intneral to external cable ? What I need to do is run a cable from the internal 68pin on-board SCSI header, and have the other end mount to a knockout or PCI-knockout. This is for a legacy DLT tape drive support on the new ML370 G3. I have used...

Hi I hope someone can help me. I have a Compaq Prolient 1600. I updated the Bios, the Firmware on the Raid controller (3200) and the Disks. All are now up to Compaq speck. I insert the Smart Start CD 4.90 and let it go do it's thing. I choose the self configure since I do not have a floppy...

I have a client running Win2K Server on a Proliant DL350. The server is rack mounted with power and NIC connected. They connect to the server via Terminal Services in Administration mode as needed to administer the box. Problem is that Terminal Services is not responding and they need to get onto...

did you discover that little bits are falling off your board ? "MattD.." wrote in message ... Hi all, Anyone got one of these? If so, an unusual request. Can anyone tell me the value of R91 (reverse side near regulation section) and C132?...

Hi, I am looking for specifications of a Prosignia 500 server. Can you help me ? Many thanks ! Michel

Does anyone know the pinout for the serial cable that is supplied with the Compaq R6000 ( 6 kW, 6 KVA, rackmount) UPS? I have one, but don't have the serial cable, and would very much like to use the UPS to shut down a computer when batteries are near exhaustion. Either reply to the newsgroup, or...

i have a RILOE II card and would like to use it. however, i don't have an external keyboard/mouse cable - the one with four ps/2 plugs and a 'strange' one going into socket on riloe. prices at resellers are somewhat high, so i wondered if somebody has schematics of this cable available? thanks...

I was just reading through the product quick spec's for the long since retired RA4000 and RA4100 products. It seems that aisde from the RA4000 using WUS3 and older drives, and the RA4100 using U2 and U3 drives, there is very little difference physical difference. Ironically, the very same array...

One of our business units needs an insane SQL 2000 cluster, so I get to build a 2 node, Active/Active 2003 Enterprise cluster ... 4TB of EMC Symetrix storage.. for 1 DB. If they meet thier projections, they will have the single largest MS SQL DB on the planet. 3 independent paths to the storage...

Are there any consequences to adding third party DIMMs to an old ProLiant ML-350? Are there any brands that should be avoided? Thanks, Richard.

We have a fair number of Compaq 4214R U2 hotswap drive cases. The behavior I normally see is that when you insert a hotswap drive into one of these cases, it autorotates, and at that point it can then be seen on the SCSI bus by the attached host computer. On one 4214R I just installed, when I...

Hi all. I tried to flash the firmware on my AHA-3960D CPQ01 SCSI card, and it's failed. The program ran ok, from dos floppy, with no emm etc running as requested. It cleared down the old firmware, then said it couldn't write the new stuff. The only reason that I can think of is that it was in a 32...

Hey folks, I have been trying to figure out why my PL800 (dual 500Mhz, 1GB) server wont recognise the fact (via the mgmt agents) that it has a "management processor", meaning an RILOE II card. My DL360 has the same card installed, including the little ribbon cable, and it shows up just...

My proliant 5000 only shows one cpu when booting nt4 server all four show up in bios detection. anyone got any ideas. Also anyone got a copy of smartsart 5.5 or earlier that i can download or you upload to my ftp server.?????