|
|
GA 8KNXP CPU Multiplier? by
Timothy Drouillard
Go into the BIOS setup then hit ctl-F1. that give you access to the
'advanced' settings.
Or.... Install 'Easytune' and do it from within Windows.
"marcusD" wrote in message
news:eiN1b.4830$n94.2530@fed1read04...
Where in the Bios can the CPU multiplier be changed? Or...
|
|
0 |
595 |
|
|
dead on-board ethernet by
Hervey Cleckley
any diagnostics for the MCP-T ethernet? mine just stopped working. checked
all of the lines, re-loaded winxp, but i kept getting fail to connect
messages. my laptop connected fine through USB and now my system is up on a
3Com PCI card. is my chipset a dud? it worked for 2 months.
HC
|
|
0 |
500 |
|
|
dual channel by
luk chiu ming
i always heard of the term Dual channel in DDR ram
Dual channel DDR266/333/400MHz
what's dual channel ?
|
|
1 |
472 |
|
|
GA-7DPXDW-P Does Not Boot by
rob
Hello All,
I just bought a new GA-7dPXDW-P. I have installed one of my old working 1GB
buffered ECC modules, both MP1900+ and a ATI 8500. Also I connected the cpu
cooler/fan, the power on/off, reset, and speaker connectors. My power supply
is the Turbo-Cool 425 ATX. Now when I try to start up that...
|
August 23rd 03 09:21 AM
by rob
|
1 |
335 |
|
|
VRXP and 2 more questions by
Tom
What's the fastest processor that works in a GA7VRXP?
What's the story with 3rd party bios I seen floating on some websites? An
easy boost in performance /multipliers, or strictly for the hard core OC'er?
What's the difference between and XP2100 and 2100 Rev.B?
Thanks,
Tom
|
August 23rd 03 03:27 AM
by Tom
|
0 |
363 |
|
|
8KNXP: where can i find IDE driver? by
klausa2
Hi,
I just bought a 8knxp. I was planning on using my existing maxtor
120GB drive with installed W2K. So I hooked it up to the IDE1
connector. POST went well, I even got a short W2K start up screen.
Then: Blue screen, INACCESSABLE_BOOT_DEVICE. Seems W2K doesnt like to
be transplanted from one...
|
|
3 |
911 |
|
|
FSB vs External CPU clock by
luk chiu ming
I saw lots motherboard BOIS has a line called External CPU clock
what's it's difference between FSB and external CPU clock?
in BOIS i usually saw people set FSB=166MHz for AMD motherboard.
but i also heard P4 CPU has 400 / 533 / 800 MHz FSB.
would that means AMD CPU is much slower than P4's?...
|
August 22nd 03 10:49 PM
by Fred
|
3 |
368 |
|
|
Thanks Tim, IDE 3 Now Works With Single HDD by
marcusD
I appreciate your patience and help with my IDE 3 setup. I finally got
it working. For others brousing the newsgroup, here's the fix:
Select the Integrated Periphals tab in Bios and change the GigaRaid
Function from RAID to ATA. Set the SCSI/Raid Control Boot
Order to make ITE RAID first on...
|
|
0 |
328 |
|
|
8KNXP F6 Final Bios & low latency memory by
Bob Davis
I didn't know it was available 'til you posted this note, but I installed it
and it works fine with my Kingston modules. In fact, both Memtest86 and
Sandra show 3-5% performance increase with no other changes.
"Alphad" wrote in...
|
|
0 |
1,022 |
|
|
8INXP or GA-7VAXP by
Richard Dower
"fabien" wrote in message
...
Howdy all:
Is anyone running one of the subject boards? I am trying to decide which
way to go - either Pentium or AMD.
INTEL!!!!
|
August 22nd 03 06:30 PM
by Jeff
|
2 |
484 |
|
|
Help! Drive Image Program for SIL 3112 Controllers? by
Helen Chevy
After using Acronis True Image to make a successful image of my c: drive,
which is made up of two SATA Raptor drives on a SIL Raid 0 (Gigabyte 8INXP),
I find this program cannot restore the image. If I try it in XP, it can't
get around the services; if I try it outside of XP, it sees only...
|
|
2 |
512 |
|
|
8KNXP Memory Capacities? by
Jackson
I'm building a computer that will be used for heavy duty 3d work and for
working with massive photoshop files. Want I want to configure is a 1
gig ram disk and 2 gigs ram for the os and applications. I bought the
8KNXP board and three gigs of this memory:
http://kingston.com/hyperx/
1GB Kit (2...
|
|
2 |
836 |
|
|
|
|
0 |
674 |
|
|
DMA problem GA 7zx-h by
Jos Coervers
U have a DMA problem with my motherboard GA-7zx-h. I can't set de DMA to my
hard disks.
Is the problem solved when I upgrade the BIOS? 3 Weeks ago my motherboard
was resseted en since that day I can't set the DMA.
Thanks.
JC. (sorry for my English)
|
|
0 |
411 |
|
|
GA-7vaxp and Barton 2500 overclock by
avqpilot
Hello All,
I recently swapped out my 2100xp with a new Barton2500 and added a 2nd
stick of ram.
I was a little disappointed that my ram got stepped down to a bus size
of 333 from the 400 level I had the single stick at before. I'm
using Corsair XMS512 PC3200. On the other hand, I did increase...
|
|
0 |
589 |
|
|
Gigabyte Board and ATA 100 by
T Thome
"Just Wondering" wrote in message
...
2 of my 3 hard drives are ATA-100 while the 3rd is ATA 133, my CD burner
is
ATA 33, a standard thing I guess. I have master/slaved the Burner
(samsung)
and my...
|
|
0 |
1,322 |
|
|
8KNXP - which RAID controller to use? by
Bob Davis
Ditto here, except for a few snags: WinXP-Pro wouldn't take the GigaRAID
drivers at install, though as it turned out using one drive proved the best
alternative because of the now well-known performance problems of GigaRAID.
Second, I never could get Easytune4 to load, either the CD version...
|
August 22nd 03 04:20 AM
by Tim
|
1 |
698 |
|
|
|
August 22nd 03 02:47 AM
by Slash
|
6 |
1,013 |
|
|
GA 7N400 Pro - memory and sound advice please by
LiveWire
The 7N400 Pro will decode Dolby Digital via the SPD/IF out. I have
actually
had the opportunity to compare the nvidia APU side by side with an
Audigy2
and, In my opinion, the nvidia APU is every bit as good.
If this is the case, why are the Windows XP audio drivers for the
...
|
|
0 |
956 |
|
|
Putting a HS on the South Bridge - worth it? by
Bill L
Hi all
I have a spare Zalman NB HS and some thermal adhesive, is there any point in
mounting this on the SB of a GA-7N400 Pro or does the SB not require cooling
(well Gigabyte etc. obviously don't feel the need)?
TIA
Bill L
|
|
1 |
1,432 |