Will a 1.2 Ghz Athlon (Thunderbird) work OK with a GA-7DXE motherboard. I will have some 2100 DDR RAM also. Anything wrong with this combination, and will the DDR RAM work at 266Mz or will it be pegged at 133Mz. I used to have the Athlon on an ABIT KT7A which I blew up by mistake. I have had...

Just installed this MB, and when windows XP shuts down, rather than turning off the power, the board starts booting up again. Holding ATX power button in for a few seconds does shut it down. Action is the same with two different power supplies. Is this a defect, or am I missing a...

This is almost a mirror of a post I made about two weeks ago, subject "Memtest86 errors" (or similar). To make a long story short, I installed a second gig of RAM like you, and Memtest86 v3 showed errors only at the very end of Test 5, and the results were not consistent. Sometimes there would be...

"Steve" wrote in message ... I'm trying to decide b/w the Asus A7N8X or the Gigabyte GA-7N400. I'm mostly looking at o/c the AMD 2600+, not too much and running Dual DDR. Couple of questions, is Dual DDR worth it (yes l...

I was having random computer shutdowns so I updated my bios to the latest, and updated the 4in1 chip drivers to the latest. Now my computer is shot. The bios boot fine through the POST, but as soon as Windows XP SP1 (fully updated) starts, the computer slows down to almost a stop. It takes...

Hi, I have installed a Gigabyte GA-KVT600 1394 motherboard and a Seagate SATA 7200.7 80gig hard drive. I am trying to get WinXP installed onto the new drive. My problem is that the drive is not seen in the bios. In the m/b manual it says I need to install the correct driver for proper operation...

I did have problems with Sandra and onboard sound card. Had to uninstall it in order to stop sound problems. I'm also having systematic system reboot when running Nero Tools (CD Speed...) "Alphad" wrote in message news:eIF%a.134067$cF.34615@rwcrnsc53... Actually I don't...

There was a review of the GA7-NNXP in the current issue of Micromart magazine, here in the UK. Although their reviews cannot easily be described as "in-depth", one paragraph did happen to catch my eye as I am seriously considering spending my hard earned money on a NNXP. open quote Having a...

I am running a GA 7N400L1 mobo and on gigabyte site it gives you a nvidia patch download, do I need to install this patch and also what chipset driver version am I running as I installed the one that come with the mobo and on the site they have 2.41, how do I find out and do I need to update to...

hi, a few days ago i purchased for my seconf computer an athlon xo 1800 and the gigabyte ga 7-zxe. now the following occours. as soons as the run the system with fsb 133 mhz windows every time crashes ( if installed) or you aren´t able to install it (during installation you geht a blue error...

i just purchased a 700n pro2 board which has the onboard ac97 sound. i also have an old SB live value. which one would be better for gaming? i have a 4.1 speaker system. thanks

Yeah, the ITE RAID controller was the one I was talking about being slow. I think that's the only drawback for the Gigabyte motherboard. On the RAID stuff, is it possible to like install the OS and stuff in non- RAID mode and then add a identical drive and turn RAID on without destroying the...

In my hardware manager i have an "unknown device" (under Other Devices) with an exclamation point. Clicking on Properties shows me that there is no driver, but the location is "on VIA Standard PCI to ISA Bridge". The device status is "The drivers for this device are not installed. (Code 28)". ...

Has the GA-7VT600-L got any multiplier adjustment??????? TIA

"Just Wondering" wrote in message ... | If have rechecked my configuration: | | Primary master is Fujitsi MPG3204AH, set as Master, on 80 pin cable. Primary | slave is Samsung CDRW drive, set as slave....

Can someone tell me if I can access ITE (GigaRAID) BIOS? I have it set on ATA in the main BIOS and then it just performs an autodetect of my HDDs plug to it... BUT it takes it a long time to run detect, and when it does that EVERY time I reboot it annoys me. Did someone find a solution for that?

How i can oveclock my Gigabyte BIOS? What i must change in the BIOS? I see a lot of number.... P4 2.4 GHZ FSB 533 VIDEO ASUS V9280 GEFORCE 4 MB GIGABYTE GA-8SG667 DDR333(PC2700) FAN Cooler Master DI4-7H53D-0L

The software downloads are useless or hard to use from the Gigabyte website.. Can anyone make an image of the GA-8GE800 Pro driver CD and compress and post it to me or tell me where I can get the driver CD or bundled software? Thanks!

Anyone know what bios or jumper settings are required for the above cpu on this board. I have the F12 bios installed. Currently it boots as a 2000+. Thanks in advance John

I am running a GA 7N400L1 mobo and on gigabyte site it gives you a nvidia patch download, do I need to install this patch and also what chipset driver version am I running as I installed the one that come with the mobo and on the site they have 2.41, how do I find out and do I need to update to...