|
|
GA-8IHXP and PIV 2.8Ghz by
v56k
Hi Guys - Just purchased a GA-8IHXP with a 2.8Ghz PIV (533FSB) - was
wondering what sort of overclocking I can get with this combination?
I'm a newbie to overclocking really (only ever dabbled with FSB overclocking
in the past) so any stats on what to set Vcore, FSB and Multiplier to would
be...
|
|
2 |
275 |
|
|
GA6WMM7 BIOS Update by
Stephen Paul Waters
any help would be grateful, I have tried to update the bios to ver f6, but
the system seems to hang. The bios update starts to run and stops with the
message "please wait".
Is there any jumpers that need to be set first? i.e. flashrecovery?
|
February 6th 04 06:55 PM
by Gary
|
1 |
187 |
|
|
Which Motheroard? by
dave stockdale
Going to upgrade. Want a decent Motherboard. Which to choose?
Had set mind on Gigabyte a GA-7N400Pro2 mb as intend to use Athlon XP2800
Barton and 512mb Crucial.
However a few newsgroup contacts have mentioned issues with the
GByte..difficulties with Bios etc, so now considering alternative...
|
|
4 |
219 |
|
|
GA-7VAXP Ultra and Inno3D Ti4200 AGPx8 by
iamaran
Board: GA-7VAXP Ultra
Video Card: Inno3D GeForce4 Ti4200 AGP x8
I am having a strange problem with this board/card combination.
The PC boots up, but I get no display - not even pre-Windows. No beeps, so
the card would appear to be working. The monitor display tells me there is
no signal and to...
|
|
1 |
434 |
|
|
M/B Recommendations please! by
David Waters
I am about to build a new system and would value opinions of group.
Will be utilising existing components Athlon XP2200+, DDR ram, IDE drives at
first.
Considering Nforce 2 of KT600 chipset.
Current m/b ZDXR+ has been 100% stable but need to upgrade for 333Mhz bus
processor planned in 6...
|
|
1 |
229 |
|
|
ga6vx-4x by
Keith
I'm looking to roll my bios currently f8 back to f5 or f7 I thought gigabyte
used to keep older bios versions were you could download them. Does anyone
know where these are available.
Thanks,
keith
--
"Friends are angels who lift us to our feet when our wings have trouble
remembering how to...
|
February 6th 04 03:25 AM
by Keith
|
0 |
173 |
|
|
Windows XP won't boot with Tandberg SLR7 tape drive by
Andrew Wasielewski
Greeting everyone,
I am having severe problems getting Windows XP (SP 1) to boot up with my new
Tandberg SLR7 tape drive on board. System has a 3 GHz P4 in a Gigabyte
GA-8KNXP Ultra Rev. 1 M/B - this is the version with embedded Adaptec
AIC-7902 U320 SCSI adaptor. There is a 4 x Maxtor Atlas IV...
|
|
3 |
621 |
|
|
Fix found for USB power always on GA-7N400 after shut down by
Mr_Nokia
If you want USB devises to switch off when the PC is shut down
as this does not occur with some new Gigabyte M/B's ie GA-7N400 pro2
e.g.
I had a 6x way mains power strip that powered my monitor,router,printer,etc
and switched off via the USB port when the PC was shut down
Solution buy a cheep PCI...
|
|
0 |
667 |
|
|
Ga-7VT600 the vanishing mobo ?? by
ray hartman
Gents:
System is a Ga-7VT600-L/Barton2600: Running 256Samsung DDR333,
noname GF4-mx440, 40 Gig Maxtor, USB_640/256 DSL, WinME_4.9
Having built it out, and finished preliminary testing I find the
system quick, friendly and solid. A GOOGLE search returns other such
comments from the NGs. But very...
|
February 5th 04 06:26 PM
by BA
|
2 |
315 |
|
|
GA-7N400 Pro2: VGA PCI by
Blueyonder News
Hi all, at present i'm having problems with my GA-7N400 Pro2 Mboard, i have
no Suitable AGP Card so i am using an old Matrox PCI Card. The problem is
that 90% of the time i switch on, there is no display (CPU fans and
harddrive work), although i have set VGA output to PCI in the bios, This is
a...
|
February 5th 04 11:57 AM
by John
|
2 |
216 |
|
|
7NNXP/Sata - Waiting for Explorer to display by
Pudn
There may be something I've missed somewhere. My system appears to work ok:
boots up very quickly, applications appear to be ok too I built this
machine about a month ago and its now starting to annoy me!
My problem is that when using Windows Explorer and browsing around it takes
a long long...
|
February 5th 04 08:40 AM
by Pudn
|
3 |
240 |
|
|
|
|
2 |
907 |
|
|
K8NNXP: Two DDR 400's don't work, one works by
Raymond Wave
I've had three sets of DDR 400 MHz modules for my new computer, and
none of these have worked when two modules are in slots 1 and 2/3. If
I only have one module, it works great. When the second module is
inserted, I get blue screens all over and memory tester reports
errors.
What's the deal with...
|
|
6 |
397 |
|
|
GA-7ZX-1 Rev5.0 mobo Question by
robert
Can anyone advise of whether I should have problems with running an 8x AGP
GPU on the mobo. I have tried a GeForce Fx5200 unsuccessfully and wonder
whether I'd be better trying an older 4x card eg Ti4200.
Have latest BIOS flashed, latest 4in1 drivers, Windows XP Pro. Tried
reverting to Win Me and...
|
February 4th 04 09:44 PM
by robert
|
0 |
181 |
|
|
GA-8PE667 Ultra by
Danny
I just got 1GB of DDR 400 and annoyingly the board won't take it as 400 -
only as 333. It's not so bad as I can overlock my CPU to 2.7 (From 2.4b) and
put the RAM to 375, but of course I'm still losing out here.
Is there any way of hacking the mobo to use the multipliers so I can have my
CPU at 2.7...
|
February 4th 04 06:30 PM
by Danny
|
0 |
234 |
|
|
|
February 4th 04 02:59 PM
by Matt
|
1 |
500 |
|
|
GA 7N400 Pro2 - Onboard LAN and Eudora by
mailman
The 7N400 Pro2 has the Realtek8110 gigabit ethernet onboard NIC.
I have no problem connecting to the net with Netscape or IE, I
can receive mail in both Netscape and Eudora (default e-mail)
but I can not send e-mail in either one. Each time I get a
"network connection timeout, code 10053".
Have...
|
February 4th 04 11:00 AM
by mailman
|
8 |
1,272 |
|
|
GigaRAID on GA - 8KNXP by
dale
I'm having an issue with the GigaRAID on the 8KNXP
I'm loosing connectivity with the two HDDs connected as NORMAL ATA drives
connected to the GigaRAID port - both on the one BUS.
When I loose the connection, I can hear what sounds like the HEADS ONLY
'clicking' into their rest-track, and I don't...
|
February 4th 04 08:26 AM
by dale
|
2 |
508 |
|
|
8SQ800 with ATI 9800 Pro problems... by
Jan Vennike
"Jim Davis" skrev i en meddelelse
...
I just installed this video card and wow, it's fast. But, it keeps
crashing with Desert Combat. I tried everything to stop the crashing,
and I think Smartgart turned off fast...
|
|
1 |
612 |
|
|
1.5GB of DDR 400 on K8VNXP? by
Gary Hennigan
Looking at the other 2 big boys, Abit and Asus, their user manuals
both mention that you can NOT use all 3 DIMM slots at DDR 400
speed. If you use all three slots the best you can get is DDR 333
speed.
The Gigabyte manual doesn't mention such a limitation, but then their
manual isn't quite as...
|
|
0 |
424 |