I was browsing the Gigabyte website the other day ( I know, get a life!) and I checked out the driver section for my GA-8INXP. There were a few things there but I wasn't sure if I needed to download them or not. So, my question is, how do I know what drivers I already have and which ones I should...

I just got this mobo, but i don't want to use the onboard vga,. I have a GF4 MX 440 that io wanna use,,how do i disable the onboard video, and enable the VGA card????? thanks Sus

I have installed Windows XP from scratch after installing new GA-7N400 Pro2. What is weird is that Windows "forgets" each driver instal. I will install a driver, check that it works correctly, but after restart, it will show this device as not having any driver installed. When I press "Update...

Anyone out there with a GA-7NNXP have a modem installed? If so, which PCI slot do you have it plugged into? Is it working reliably? Same question with regards to installing a alternate sound card into a reliably working PCI slot. :) Please send your reply to Thanks, Dale

I just bought this board and so far, everything has been very solid with it. I owned a Maxtor 120GB hard drive (7200 RPM, non-serial) that worked just fine in my last system. Upon re-installing the OS here (XP Pro), I have one strange problem. The very first thing I delete, of ANYTHING, be it a...

Anyone in the UK beware that despite what's published in the Gigabyte motherboard manuals and on their web site there isn't any support of their products in the UK. I've recently sent them an email to the address as stated in a manual from a motherboard newly introduced to the market plus filled...

I've recently acquired an old box which I was hoping to rebuild and pass on to the children as a games machine. The previous owner successfully used it under Win98 so I'm fairly confident all components are functioning. The processor is an AMD K6 400. Win2K Pro SP3 has installed successfully on a...

Ordered refurb'd fm Newegg for $70. Worth it or spend the extra $30-$50 for a top-flight nF2 Ultra 400 board? Found only one review at SubZero.com and several "slow post" and RAID/memory post probs in these NG's. Would like to hear from Pro owners but any input is welcome, thx all.

Just bought refurbished GA-KBNXP and realized that CD that comes with original factory packaged board is missing. Do you have any pointers when can I download it? I looked on Gigabyte site, but didn't find s/w there - only drivers updates. Actually what I need is only part required to install the...

After running several "stress" test, I am getting errors. Specifically, I ran Prime95 and memtest. I am perplexed, however that when I run my "Easy Tune 4" program to monitor my CUP temp, it NEVER goes about 43c., no matter what test I run. Is this "normal" ? thanks

visit www.bioschips.webhop.net For Replacement chips $14 re-flash of existing chip $8

I just got this motherboard and am trying to boot up, but it only get half way through the Win2000 splash and then blue screens with the message "Cant find boot drive" What to do from here? Bill GA-7DPXDW+ DUAL 333FSB DDR

Trying to change my multiplier with no luck, here's my spec's any help would be appreciated. xp2500 Barton 40 gig Cuda 512 Infineon ram - ultra timimgs liteon burner 350 watt Tsunami p.s. all is runnung stock rock solid, just trying to get the multiplier up or

I have installed an AMD 2400+ but on start up (and in Sandra) it is reported as an AMD 1800+. I have tried changing the dip switches but this had no effect - does anyone know why this is? I have of course cleared the CMOS memory Steve

Hello! I finally got rid of my Soyo Dragon+ Via KT266A board and I had high hopes I can get rid of all the problems it made but it seems my problems just got worse with the KNXP :( Here is the biggest problem I have at the moment and my setup: * KNXP with P4 2.4C and 1 GB RAM (2x 512 PC400) *...

I found these new drivers on the Silicon Image website. Dated September 15th 2003 with a version number of 1.1.0.52, Sil3112A SATALink BASE...

Hiya :) Current spec: GA-7VAXP-A, Athlon 2500 (Barton) clocked to 2GHz, 512MB PC333, Asus GF3U, Win XP Pro. Problem: MOBO is about 5 months old and the RTC seems to keep losing time - around 1 minute an hour. I've changed the battery, tested the original as good. I'm reduced to updating the...

Trying to set up with 3-sata drives. Had system working with 1 sata, and when I added the raid pair it fell apart - gets into a reboot loop. As anyone had success with this setup - or can someone suggest an approach. The documentation is less than illuminating - probably better than my Japanese...

my motherboard monitor (gigbyte 7vtxe) warns me... Is this dangerous? I have some random lockups, could this be the reason? Thanks! --=20 F r e e

I am going to build my new system next week, I am one day away from getting the GA-7N400 Pro2 mobo and an AMD processor. Is this a relatively decent motherboard free of problems and popular? Compared to other gigabyte models of course. It seems to have everything I need, I just want to make sure...