|
|
be6-ii help by
alan smithey
Hi,
Just got back from vacation and went to boot up an old machine with a BE6-II
mother board.
First it made an alarm sound. I checked to make sure the voltage wasn't set
to 200 and it wasn't. I tried removing the RAM and that had no affect. I
finally ended up fiddling with the ribbon cable to the...
|
July 15th 03 06:07 PM
by anders
|
5 |
1,184 |
|
|
Building New PC by
alanj
Let me say first---you guys in this group have given me a great education
and have helped me plenty in the past. Now, what I'm thinking about, is
upgrading ( well actually---replacing) my current PC--- case and all. Maybe
sell or give as a gift my current computer. This is not a good idea for...
|
|
3 |
482 |
|
|
Flashed Bios - - can't restart by
alanj
I have just flashed the bios on my KT7A board ( shoulda left things alone)
and now cannot restart the pc or even after I shut it off, I cannot just
press the "ON" button to boot. I have to flip the switch in back of the
tower to "OFF" then "ON". Then I can boot just fine. What happens is---I
get...
|
March 5th 05 11:14 PM
by DFE
|
3 |
356 |
|
|
Newer Alternative to KT7A by
alanj
Hi all,
Maybe I should stick with what I have but I'm curious as to replacing mt
KT7A-133 motherboard to one that is compatable with what I have already
installed in it, for example I have SDS Ram, not DDR. The years have
introduced so many new technologies that I guess I'm lagging behind. ...
|
January 15th 05 02:18 AM
by alanj
|
4 |
350 |
|
|
KT7A and USB 2.0 by
alanj
Hi,
I have had this MB for some years now and have had no problems with
it---so I've not thought of replacing it. Maybe I could get a suggestion on
a newer board that is similar ( now that prices have come down
considerably).
But I've been thinking about upgrading from the intigrated USB 1.0 to...
|
February 20th 05 09:15 PM
by alanj
|
2 |
397 |
|
|
Abit IC7 USB connection to nomad player. by
Alastair Grant
I am going through a nightmare to try and get my USB1.1 Creative Nomad
II MG to work on my Abit IC7. I can download files off of it, and
change settings, but I am unable to upload files.
I have spoken to Creative support, but they just have a list of
questions as usual and couldn't help.
I have...
|
|
3 |
511 |
|
|
Bx6 Rev2.0 with Linksys G Wireless Lan WMP54G by
Albert Au
I have plugged the card into PCI slot, bootup, but no "new hardware wizard"
from XP, nor I can install manually.
I have tried another slot, no luck.
I have contact Linksys system support, they suggest to reinstall the OS.
I have reinstall XP in clean, no luck.
The card works well in another PC...
|
|
0 |
535 |
|
|
|
|
4 |
1,050 |
|
|
Problem with second IDE port in an Abit IS/ by
Alejandro Sierra
Hello:
Everything seems to be OK, but the second port is not working well. I
connected a DVD burner and the system did not detect it. Before that I
connected an IDE HD, the system detect it but could not boot. That IDE
HD is set as slave.
The second IDE cable is from an older MB but had not been...
|
|
0 |
453 |
|
|
help:abit nf7-s v2.0 by
alex
hi can some one help me seem to be having a few problems
with my abit nf7-s v2,0
the problem is i have 2 x maxtor 120 gig sata drives on a raid 0
and a 2500xp barton
my bios is 18
and i have 2 x 256 ddr2700
the dives seem to be very slow and there is lots off hard drive activity
going on
|
December 15th 03 05:50 PM
by alex
|
2 |
317 |
|
|
Problems with Abit KT7-Raid and 200GB Seagate by
Alexander Vierschrodt
Hi!
I'm using a Abit KT7-R board and just added a 200gb Seagate harddrive (now the
only harddrive).
The VIA 4in1 drivers are installed and the newest bios is on the board but the
performance of the harddrive is much too low (the reading speed drops every few
seconds to around 1MB/s). HDTune says...
|
August 17th 04 05:43 PM
by kony
|
1 |
510 |
|
|
Abit BH 6 by
Als
I wanted to upgrade the video card in my nieces computer. As it is the first
generation Abit BH 6 I was a little leery of running a newer AGP video card
so I bought a PCI model specifically the ATI 9250. So it won't boot with it
installed. Tried in another comp and it booted just fine. AGP I know...
|
|
1 |
366 |
|
|
IS7-E Won't boot in enhanced mode by
Ambulater
I have a WD 120GB SATA HD on SATA 1, a CDRW drive on IDE 1 and a CDR-RW/DVD
combo drive on IDE 2. All 3 are set to master. With this combination I have
tried setting On-chip serial ATA mode to "enhanced" and "auto". the computer
begins to boot, but the screen always goes blank before reaching the...
|
|
1 |
345 |
|
|
Matrox G550 will work with 785 Chipset? by
anao
Hi,
My Asus motherboard (P4P800 Deluxe) is dead & I would like to buy an ABIT
motherboard with the 478 ( I have a cpu P4 2.4 & 4X256 DDR400 PC3200) & 875
chipset or 865 but all these boards have AGP 8X & the Matrox g550 is the
AGP is 2X/4X, is my card could work with this chipset?
Thank you.
Jean
|
|
1 |
992 |
|
|
Digidice no Remote Controler by
Andre Peper
Hello,
I have bought a Digidice Barebone.
But the Remote Control is not working.
Can anybody help me?
de andre
--
www.qsl.net/dl4ycj
|
|
0 |
620 |
|
|
NF7-S V2.0 Dual Channel performance by
Andreas Kotschote
Hi,
i just bought two 512 MB DDR PC-400 Infineon Ram and am running them
synchron (333 FSB, running asynchron on 400 gives not better results) to
my 2600+ Athlon. I am not noticing any real improvements in performance,
here are my benchmarks results (befor I had 1 512 MB Ram PC-333)
Before Dual...
|
December 3rd 03 09:22 AM
by Chris C
|
1 |
785 |
|
|
NF7-S, external USB hdd disappears by
Andreas Scheer
Does anybody having resolved the problem, that an external USB-hdd
disappears after a while?
I have the problem, that the partitions are available in the explorer,
but after a while, they are not available any more. When I go to the
administration tool in the system settings, it is not possible to...
|
|
0 |
765 |
|
|
Abit AX8 mainboard with AMD64 "venice"? by
Andreas Wittke
Hello,
do i need a bios update for the brandnew AX8 to run the AMD64 "Venice"?
Because i wanna buy the AMD64 "Venice" but i can't run a bios update if
the venice doesn't work....
regards
|
|
0 |
394 |
|
|
Abit AS8 USB 2.0 not working by
andrew
I just installed the AS8 on my system and the USB sockets all are running at
1.0. Anytime I insert a 2.0 thumb drive or external hard drive, a balloon
pops up saying, "This device can perform faster... The USB Device can
perform faster if you connect it to a Hi-Speed USB 2.0 port".
So I insert the...
|
|
1 |
386 |
|
|
Any ideas? by
Andrew A. Caruso
I have an Abit KT7/KT-RAID motherboard which I purchased three years ago.
Last July, my system shut down for no reason at all. When I tried booting up
the system, it would turn on but the Operating System would load. I'm still
having this problem, but what I need to do is turn off my system, unplug...
|
February 14th 04 05:47 PM
by Daniel
|
3 |
545 |