|
|
|
|
0 |
820 |
|
|
|
|
0 |
744 |
|
|
no post, no beep...cpu failure? by
dryOtto
Hi All,
I just put together an old AMD Athlon 1 Gig chip with a stick of 256DDR ram,
an old WDC HDD, a new case, and a new Gigabyte GA-7VKMP mobo.
After about an hour's worth of computing, (installing win2K, service packs,
browsing, etc) I was setting up a Win2K/RH7.1 dualboot, when I restarted...
|
|
6 |
1,033 |
|
|
new MB, Chip, &.... by
Bruin
If I go out & get myself a new Nforce2 dual channel board & a 2500+ could I
make due with the RAM I got now? 2 sticks, 256 meg a piece of Corsair
PC2700 CL2 RAM. Good stuff, & I really got no other use for it.
|
July 1st 03 02:29 AM
by Bruin
|
0 |
330 |
|
|
Asrock K7VM2 xp1800+ help by
adrian
hi i am new here and i need some help
i have an Asrock K7VM2 with a xp1800+ and 1 x 128 and 1 x 256 (both pc133) i
have just upgraded to the K7VM2 and when windows 2000 pro loads up it gets
to the the logo screen then says it can not read the boot drive but in
windows 98 it works
adrian
|
July 1st 03 05:46 AM
by adrian
|
0 |
727 |
|
|
KT133 Chipset/Processor Question by
Wes Newell
On Sun, 29 Jun 2003 21:52:33 +0000, ZaXXoN wrote:
Got allmost all the necessary info here for my old Abit KT7A-Raid
board - but, a supplyer for a XP 2100 cpu with a "B core".
Anybody know of a verified supplyer?
http://www.newegg.com/app/ViewProduct.asp?submit=property&DEPA=1
--
|
July 1st 03 05:57 AM
by ZaXXoN
|
1 |
603 |
|
|
O/C Thoro 2400 retail? by
Wes Newell
On Mon, 30 Jun 2003 18:00:12 -0400, Donn Ganley wrote:
MB ASUS A7V266-E bios 11 - using 17X133 settings, get reading of 2282 using
AMD's CPU measurement software - Sandra also - carefully using my "realtime"
FS2002 simulator FPS flight pattern, I definately get increase over stock
setting...
|
|
0 |
610 |
|
|
System recommendation? by
QED, eh ?
Depends how much FEA taxes the CPU ALU.
There are significant differences between P4 and Athlon (Tbred and Barton)
chips, in this respect.
Check out CPU reviews - which feature appropriate benchies with and w/o
overclocks.
"Posting 2002" wrote in...
|
|
0 |
350 |
|
|
Athlon 2500XP Barton - Is this considered to be "overclocking" ? by
Arif
Hi folks,
Motherboard is Asus A7N8X deluxe PCB Ver 2.0 which supports a 400 FSB
CPU is Athlon Barton 2500XP ("Real" Internal Clock Speed is 1.83Ghz)
This CPU officialy supports a 333 FSB
Memory is Crucial PC3200 (CAS=3)
I understand the "Official" motherboard settings I should be using
a
CPU...
|
July 1st 03 12:22 PM
by Nom
|
5 |
1,149 |
|
|
Thermal compound... by
Tin-Char D'un
Up until today I was truly skeptical about how different goops can effect
your temps... When I was using some generic crap on my XP2600+/Coolermaster
HAC-V81 XDream I was getting idle temps of around 47C, sometimes higher. I
attacked the HSF with a bit of 1200 grit wet & dry paper and slapped on...
|
|
5 |
620 |
|
|
CoolerMaster Aero 7 CPU cooler question by
[email protected]
I tried one off my system to see how quiet there are and found that they
make a good bit of noise at full throttle. How cool will it keep a CPU
at the lowest setting? Does anyone know what the RPM range is for the
fan? Thanks.
--
Asus A7N8X deluxe rev. 2.0
AMD XP 3200+, 400fsb
Corsair 512 meg x 2,...
|
July 1st 03 02:43 PM
by LBJGH
|
1 |
893 |
|
|
Nanya Memory Modules?? by
Patrick
Hi,
just installed AIDA32 and it tells me that my memory is made by Nanya, the
chips are marked as Elixar and the id shows with AIDA32 as Nanya, are Nanya
any good? Who else do they supply chips for?
Presntly waiting for delivery of PC3200 OCZ 512mb memory chip and hoping it
will run with this...
|
|
0 |
512 |
|
|
Overclocking AMD Athlon 950 Socket A by
Allen Jeffrey
My Question Is Would It Be Safe To Overclock An Amd Athalon 950 And If So
What Is The Safest Way To Do This Wihout Burning Somthing Up?
I Have A Socket A Athlon 950 And An Epox 8KTA3PRO Motherboard.
|
|
0 |
942 |
|
|
Overclocking AMD Athalon 950 by
Allen Jeffrey
My Question Is Would It Be Safe To Overclock An Amd Athalon 950 And If So
What Is The Safest Way To Do This Wihout Burning Somthing Up?
|
|
2 |
466 |
|
|
A7V133-C by
Christian Spřer
can i use an athlon thunderbird c 1333mhz on my Asus A7V133-C motherboard
(PC133 sd-ram)?
|
|
2 |
516 |
|
|
2-3-2-6 vs. 2-2-2-6 ? by
Thomas Andersson
Hi!
I've tried to get and answer or find information about this, but without
success so far.
It's quite simple, I'm about to chose ram for my A7N8X-Deluxe (w. Barton
2500 to be run at 200Mhz).
I've decided on Kingston Hyper-X, just not what sticks to use yet.
I will get 2*512MB (PC3200, to be run...
( 1 2)
|
|
19 |
868 |
|
|
80 mm to 60 mm Funnel for changing Heatsink Fan? by
Patrick
Hi,
I am considering buying a funnel adapter (PcToys Funnel Maxx 60mm to 80mm)
to put a larger fan on my cpu, I presently have a retail Heatsink\Fan
installed on a Barton 2500+ (the combo that comes with the retail cpu). I am
considering using the funnel adapter to get more air on the Heatsink,...
|
July 2nd 03 04:23 AM
by Bill
|
8 |
713 |
|
|
Why doesn't Pin Mod trick work fo rme? by
LBJGH
All the palomino's are locked. You have to close all the L1 bridges to
change the multipliers.
"Ed" wrote in message
...
I have a palomino 2000+, tried to change the default multiplier of 12.5x
to 13x. The mobo supports up to...
|
July 2nd 03 04:48 AM
by Enigma
|
1 |
694 |
|
|
2600+ overclocking by
JIMBO CHIVERS
Hi all ,i've got an XP2600 throughbred b processor running on an Asrock
K7S8X mobo (cheap i know).
What would be my chance of getting it to run at the same speed as an XP3000.
It's currently showing as an Xp2700 running at 2200mhz .
6.25*352.
|
|
5 |
433 |
|
|
help me oc sorry in new by
joe
ok my motherbord is a fic az11
i have AMD Duron, 801MHz, 64KB
wandering if somone could even tell me the basics on how to pump more juice
out of the lil ****er..
thnx joe
|
July 2nd 03 08:14 AM
by joe
|
0 |
385 |